From: "Navare, Manasi" <manasi.d.navare@intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 4/5] drm/i915/dp: Call hw.adjusted_mode as hw_mode for clarity
Date: Tue, 27 Oct 2020 13:58:05 -0700 [thread overview]
Message-ID: <20201027205805.GD29088@labuser-Z97X-UD5H> (raw)
In-Reply-To: <20201027205418.GU6112@intel.com>
On Tue, Oct 27, 2020 at 10:54:18PM +0200, Ville Syrjälä wrote:
> On Tue, Oct 27, 2020 at 01:43:15PM -0700, Navare, Manasi wrote:
> > On Tue, Oct 27, 2020 at 10:09:20PM +0200, Ville Syrjälä wrote:
> > > On Tue, Oct 27, 2020 at 12:30:33PM -0700, Manasi Navare wrote:
> > > > No functional changes just use hw_mode to retrive
> > > > hw.adjusted_mode during HW state readout for clarity
> > > > in bigjoiner case.
> > >
> > > Still don't understnad what this has to do with bigjoiner. Looks
> > > like a simple introduction of a strangely named local variable to
> > > me?
> >
> > SHould I just drop this then? Or just reword the commit message to remove
> > bigjoiner related stuff?
>
> I guess just drop it if it has no real purpose.
Yes sounds good, I think @Maarten probably changed it so its more intuitive
But I can drop this
Manasi
>
> >
> > Manasi
> > >
> > > >
> > > > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > > > ---
> > > > drivers/gpu/drm/i915/display/intel_display.c | 22 +++++++++++---------
> > > > 1 file changed, 12 insertions(+), 10 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > > index cabda5a02e9e..b000dd68977f 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > @@ -9119,20 +9119,22 @@ static void intel_get_pipe_src_size(struct intel_crtc *crtc,
> > > > void intel_mode_from_pipe_config(struct drm_display_mode *mode,
> > > > struct intel_crtc_state *pipe_config)
> > > > {
> > > > - mode->hdisplay = pipe_config->hw.adjusted_mode.crtc_hdisplay;
> > > > - mode->htotal = pipe_config->hw.adjusted_mode.crtc_htotal;
> > > > - mode->hsync_start = pipe_config->hw.adjusted_mode.crtc_hsync_start;
> > > > - mode->hsync_end = pipe_config->hw.adjusted_mode.crtc_hsync_end;
> > > > + struct drm_display_mode *hw_mode = &pipe_config->hw.adjusted_mode;
> > > >
> > > > - mode->vdisplay = pipe_config->hw.adjusted_mode.crtc_vdisplay;
> > > > - mode->vtotal = pipe_config->hw.adjusted_mode.crtc_vtotal;
> > > > - mode->vsync_start = pipe_config->hw.adjusted_mode.crtc_vsync_start;
> > > > - mode->vsync_end = pipe_config->hw.adjusted_mode.crtc_vsync_end;
> > > > + mode->hdisplay = hw_mode->crtc_hdisplay;
> > > > + mode->htotal = hw_mode->crtc_htotal;
> > > > + mode->hsync_start = hw_mode->crtc_hsync_start;
> > > > + mode->hsync_end = hw_mode->crtc_hsync_end;
> > > >
> > > > - mode->flags = pipe_config->hw.adjusted_mode.flags;
> > > > + mode->vdisplay = hw_mode->crtc_vdisplay;
> > > > + mode->vtotal = hw_mode->crtc_vtotal;
> > > > + mode->vsync_start = hw_mode->crtc_vsync_start;
> > > > + mode->vsync_end = hw_mode->crtc_vsync_end;
> > > > +
> > > > + mode->flags = hw_mode->flags;
> > > > mode->type = DRM_MODE_TYPE_DRIVER;
> > > >
> > > > - mode->clock = pipe_config->hw.adjusted_mode.crtc_clock;
> > > > + mode->clock = hw_mode->crtc_clock;
> > > >
> > > > drm_mode_set_name(mode);
> > > > }
> > > > --
> > > > 2.19.1
> > > >
> > > > _______________________________________________
> > > > Intel-gfx mailing list
> > > > Intel-gfx@lists.freedesktop.org
> > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > >
> > > --
> > > Ville Syrjälä
> > > Intel
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-10-27 20:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-27 19:30 [Intel-gfx] [PATCH 0/5] Prep for Big joiner + Allow bigjoiner modes Manasi Navare
2020-10-27 19:30 ` [Intel-gfx] [PATCH 1/5] drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split Manasi Navare
2020-10-27 19:59 ` Ville Syrjälä
2020-10-30 7:36 ` [Intel-gfx] [drm/i915] b43515991b: WARNING:at_drivers/gpu/drm/i915/display/intel_display.c:#verify_crtc_state[i915] kernel test robot
2020-10-27 19:30 ` [Intel-gfx] [PATCH 2/5] drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes Manasi Navare
2020-10-27 19:30 ` [Intel-gfx] [PATCH 3/5] drm/i915/dp: Prep for bigjoiner atomic check Manasi Navare
2020-10-27 20:06 ` Ville Syrjälä
2020-10-27 20:56 ` Navare, Manasi
2020-10-27 19:30 ` [Intel-gfx] [PATCH 4/5] drm/i915/dp: Call hw.adjusted_mode as hw_mode for clarity Manasi Navare
2020-10-27 20:09 ` Ville Syrjälä
2020-10-27 20:43 ` Navare, Manasi
2020-10-27 20:54 ` Ville Syrjälä
2020-10-27 20:58 ` Navare, Manasi [this message]
2020-10-27 19:30 ` [Intel-gfx] [PATCH 5/5] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3 Manasi Navare
2020-10-27 20:17 ` Ville Syrjälä
2020-10-27 20:52 ` Navare, Manasi
2020-10-28 3:55 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Prep for Big joiner + Allow bigjoiner modes Patchwork
2020-10-28 4:11 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201027205805.GD29088@labuser-Z97X-UD5H \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox