Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [PATCH v3 09/19] drm/i915: s/port/hpd_pin/ for icp+ ddi hpd bits
Date: Wed, 28 Oct 2020 23:33:13 +0200	[thread overview]
Message-ID: <20201028213323.5423-10-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20201028213323.5423-1-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Use hpd_pin instead of port in the parametrized ICP+ DDI HPD
macros. Makes it clear what these refer to.

v2: Handle DG1

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 22 +++++++--------
 drivers/gpu/drm/i915/i915_reg.h | 50 ++++++++++++++++-----------------
 2 files changed, 36 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 216d6247b30a..d98420b62107 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -141,9 +141,9 @@ static const u32 hpd_gen11[HPD_NUM_PINS] = {
 };
 
 static const u32 hpd_icp[HPD_NUM_PINS] = {
-	[HPD_PORT_A] = SDE_DDI_HOTPLUG_ICP(PORT_A),
-	[HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(PORT_B),
-	[HPD_PORT_C] = SDE_DDI_HOTPLUG_ICP(PORT_C),
+	[HPD_PORT_A] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_A),
+	[HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_B),
+	[HPD_PORT_C] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_C),
 	[HPD_PORT_TC1] = SDE_TC_HOTPLUG_ICP(TC_PORT_1),
 	[HPD_PORT_TC2] = SDE_TC_HOTPLUG_ICP(TC_PORT_2),
 	[HPD_PORT_TC3] = SDE_TC_HOTPLUG_ICP(TC_PORT_3),
@@ -153,10 +153,10 @@ static const u32 hpd_icp[HPD_NUM_PINS] = {
 };
 
 static const u32 hpd_sde_dg1[HPD_NUM_PINS] = {
-	[HPD_PORT_A] = SDE_DDI_HOTPLUG_ICP(PORT_A),
-	[HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(PORT_B),
-	[HPD_PORT_C] = SDE_DDI_HOTPLUG_ICP(PORT_C),
-	[HPD_PORT_D] = SDE_DDI_HOTPLUG_ICP(PORT_D),
+	[HPD_PORT_A] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_A),
+	[HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_B),
+	[HPD_PORT_C] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_C),
+	[HPD_PORT_D] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_D),
 };
 
 static void intel_hpd_init_pins(struct drm_i915_private *dev_priv)
@@ -1076,13 +1076,13 @@ static bool icp_ddi_port_hotplug_long_detect(enum hpd_pin pin, u32 val)
 {
 	switch (pin) {
 	case HPD_PORT_A:
-		return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(PORT_A);
+		return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(HPD_PORT_A);
 	case HPD_PORT_B:
-		return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(PORT_B);
+		return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(HPD_PORT_B);
 	case HPD_PORT_C:
-		return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(PORT_C);
+		return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(HPD_PORT_C);
 	case HPD_PORT_D:
-		return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(PORT_D);
+		return val & SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(HPD_PORT_D);
 	default:
 		return false;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 950d2bd7d7a8..eb36355ce913 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8349,26 +8349,26 @@ enum {
 /* south display engine interrupt: ICP/TGP */
 #define SDE_GMBUS_ICP			(1 << 23)
 #define SDE_TC_HOTPLUG_ICP(tc_port)	(1 << ((tc_port) + 24))
-#define SDE_DDI_HOTPLUG_ICP(port)	(1 << ((port) + 16))
-#define SDE_DDI_MASK_ICP		(SDE_DDI_HOTPLUG_ICP(PORT_B) | \
-					 SDE_DDI_HOTPLUG_ICP(PORT_A))
+#define SDE_DDI_HOTPLUG_ICP(hpd_pin)	REG_BIT(16 + _HPD_PIN_DDI(hpd_pin))
+#define SDE_DDI_MASK_ICP		(SDE_DDI_HOTPLUG_ICP(HPD_PORT_B) | \
+					 SDE_DDI_HOTPLUG_ICP(HPD_PORT_A))
 #define SDE_TC_MASK_ICP			(SDE_TC_HOTPLUG_ICP(TC_PORT_4) | \
 					 SDE_TC_HOTPLUG_ICP(TC_PORT_3) | \
 					 SDE_TC_HOTPLUG_ICP(TC_PORT_2) | \
 					 SDE_TC_HOTPLUG_ICP(TC_PORT_1))
-#define SDE_DDI_MASK_TGP		(SDE_DDI_HOTPLUG_ICP(PORT_C) | \
-					 SDE_DDI_HOTPLUG_ICP(PORT_B) | \
-					 SDE_DDI_HOTPLUG_ICP(PORT_A))
+#define SDE_DDI_MASK_TGP		(SDE_DDI_HOTPLUG_ICP(HPD_PORT_C) | \
+					 SDE_DDI_HOTPLUG_ICP(HPD_PORT_B) | \
+					 SDE_DDI_HOTPLUG_ICP(HPD_PORT_A))
 #define SDE_TC_MASK_TGP			(SDE_TC_HOTPLUG_ICP(TC_PORT_6) | \
 					 SDE_TC_HOTPLUG_ICP(TC_PORT_5) | \
 					 SDE_TC_HOTPLUG_ICP(TC_PORT_4) | \
 					 SDE_TC_HOTPLUG_ICP(TC_PORT_3) | \
 					 SDE_TC_HOTPLUG_ICP(TC_PORT_2) | \
 					 SDE_TC_HOTPLUG_ICP(TC_PORT_1))
-#define SDE_DDI_MASK_DG1		(SDE_DDI_HOTPLUG_ICP(PORT_D) | \
-					 SDE_DDI_HOTPLUG_ICP(PORT_C) | \
-					 SDE_DDI_HOTPLUG_ICP(PORT_B) | \
-					 SDE_DDI_HOTPLUG_ICP(PORT_A))
+#define SDE_DDI_MASK_DG1		(SDE_DDI_HOTPLUG_ICP(HPD_PORT_D) | \
+					 SDE_DDI_HOTPLUG_ICP(HPD_PORT_C) | \
+					 SDE_DDI_HOTPLUG_ICP(HPD_PORT_B) | \
+					 SDE_DDI_HOTPLUG_ICP(HPD_PORT_A))
 
 #define SDEISR  _MMIO(0xc4000)
 #define SDEIMR  _MMIO(0xc4004)
@@ -8436,12 +8436,12 @@ enum {
  */
 
 #define SHOTPLUG_CTL_DDI				_MMIO(0xc4030)
-#define   SHOTPLUG_CTL_DDI_HPD_ENABLE(port)		(0x8 << (4 * (port)))
-#define   SHOTPLUG_CTL_DDI_HPD_STATUS_MASK(port)	(0x3 << (4 * (port)))
-#define   SHOTPLUG_CTL_DDI_HPD_NO_DETECT(port)		(0x0 << (4 * (port)))
-#define   SHOTPLUG_CTL_DDI_HPD_SHORT_DETECT(port)	(0x1 << (4 * (port)))
-#define   SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(port)	(0x2 << (4 * (port)))
-#define   SHOTPLUG_CTL_DDI_HPD_SHORT_LONG_DETECT(port)	(0x3 << (4 * (port)))
+#define   SHOTPLUG_CTL_DDI_HPD_ENABLE(hpd_pin)			(0x8 << (_HPD_PIN_DDI(hpd_pin) * 4))
+#define   SHOTPLUG_CTL_DDI_HPD_STATUS_MASK(hpd_pin)		(0x3 << (_HPD_PIN_DDI(hpd_pin) * 4))
+#define   SHOTPLUG_CTL_DDI_HPD_NO_DETECT(hpd_pin)		(0x0 << (_HPD_PIN_DDI(hpd_pin) * 4))
+#define   SHOTPLUG_CTL_DDI_HPD_SHORT_DETECT(hpd_pin)		(0x1 << (_HPD_PIN_DDI(hpd_pin) * 4))
+#define   SHOTPLUG_CTL_DDI_HPD_LONG_DETECT(hpd_pin)		(0x2 << (_HPD_PIN_DDI(hpd_pin) * 4))
+#define   SHOTPLUG_CTL_DDI_HPD_SHORT_LONG_DETECT(hpd_pin)	(0x3 << (_HPD_PIN_DDI(hpd_pin) * 4))
 
 #define SHOTPLUG_CTL_TC				_MMIO(0xc4034)
 #define   ICP_TC_HPD_ENABLE(tc_port)		(8 << (tc_port) * 4)
@@ -8451,22 +8451,22 @@ enum {
 #define SHPD_FILTER_CNT				_MMIO(0xc4038)
 #define   SHPD_FILTER_CNT_500_ADJ		0x001D9
 
-#define ICP_DDI_HPD_ENABLE_MASK		(SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_B) | \
-					 SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_A))
+#define ICP_DDI_HPD_ENABLE_MASK		(SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_B) | \
+					 SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_A))
 #define ICP_TC_HPD_ENABLE_MASK		(ICP_TC_HPD_ENABLE(TC_PORT_4) | \
 					 ICP_TC_HPD_ENABLE(TC_PORT_3) | \
 					 ICP_TC_HPD_ENABLE(TC_PORT_2) | \
 					 ICP_TC_HPD_ENABLE(TC_PORT_1))
-#define TGP_DDI_HPD_ENABLE_MASK		(SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_C) | \
-					 SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_B) | \
-					 SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_A))
+#define TGP_DDI_HPD_ENABLE_MASK		(SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_C) | \
+					 SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_B) | \
+					 SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_A))
 #define TGP_TC_HPD_ENABLE_MASK		(ICP_TC_HPD_ENABLE(TC_PORT_6) | \
 					 ICP_TC_HPD_ENABLE(TC_PORT_5) | \
 					 ICP_TC_HPD_ENABLE_MASK)
-#define DG1_DDI_HPD_ENABLE_MASK		(SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_D) | \
-					 SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_C) | \
-					 SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_B) | \
-					 SHOTPLUG_CTL_DDI_HPD_ENABLE(PORT_A))
+#define DG1_DDI_HPD_ENABLE_MASK		(SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_D) | \
+					 SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_C) | \
+					 SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_B) | \
+					 SHOTPLUG_CTL_DDI_HPD_ENABLE(HPD_PORT_A))
 
 #define _PCH_DPLL_A              0xc6014
 #define _PCH_DPLL_B              0xc6018
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-10-28 21:34 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-28 21:33 [Intel-gfx] [PATCH v3 00/19] drm/i915: Futher cleanup around hpd pins and port identfiers Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 01/19] drm/i915: s/PORT_TC/TC_PORT_/ Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 02/19] drm/i915: Add PORT_TCn aliases to enum port Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 03/19] drm/i915: Give DDI encoders even better names Ville Syrjala
2020-11-17 14:33   ` Jani Nikula
2020-11-17 15:23     ` Ville Syrjälä
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 04/19] drm/i915: Introduce AUX_CH_USBCn Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 05/19] drm/i915: Pimp AUX CH names Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 06/19] drm/i915: Use AUX_CH_USBCn for the RKL VBT AUX CH setup Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 07/19] drm/i915: Parametrize BXT_DE_PORT_HP_DDI with hpd_pin Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 08/19] drm/i915: Introduce GEN8_DE_PORT_HOTPLUG() Ville Syrjala
2020-10-28 21:33 ` Ville Syrjala [this message]
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 10/19] drm/i915: s/tc_port/hpd_pin/ in GEN11_{TC, TBT}_HOTPLUG() Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 11/19] drm/i915: s/tc_port/hpd_pin/ in icp+ TC hotplug bits Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 12/19] drm/i915: Relocate intel_hpd_{enabled, hotplug}_irqs() Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 13/19] drm/i915: Split gen11_hpd_detection_setup() into tc vs. tbt variants Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 14/19] drm/i915: Don't enable hpd detection logic from irq_postinstall() Ville Syrjala
2020-10-28 21:47   ` Lucas De Marchi
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 15/19] drm/i915: Rename 'tmp_mask' Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 16/19] drm/i915: Remove the per-plaform IIR HPD masking Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 17/19] drm/i915: Enable hpd logic only for ports that are present Ville Syrjala
2020-10-28 22:16   ` Lucas De Marchi
2020-10-30 13:50     ` Ville Syrjälä
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 18/19] drm/i915: Use GEN3_IRQ_INIT() to init south interrupts in icp+ Ville Syrjala
2020-10-28 21:33 ` [Intel-gfx] [PATCH v3 19/19] drm/i915: Get rid of ibx_irq_pre_postinstall() Ville Syrjala
2020-10-28 22:20   ` Lucas De Marchi
2020-10-28 21:52 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Futher cleanup around hpd pins and port identfiers (rev5) Patchwork
2020-10-28 21:53 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-10-28 22:21 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-29  0:49 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201028213323.5423-10-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox