Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v15 05/14] drm/i915: Pass intel_atomic_state instead of drm_atomic_state
Date: Thu,  5 Nov 2020 20:03:46 -0800	[thread overview]
Message-ID: <20201106040355.12809-6-manasi.d.navare@intel.com> (raw)
In-Reply-To: <20201106040355.12809-1-manasi.d.navare@intel.com>

No functional changes, to align with previous cleanups pass
intel_atomic_state instead of drm_atomic_state.
Also pass this intel_atomic_state with crtc_state to
some of the atomic_check functions.

v2:
* Squash some changes from next patch (Ville)

Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 31 +++++++++++---------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index a3acd3d36330..bae40b43ae1d 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -12683,7 +12683,7 @@ static bool encoders_cloneable(const struct intel_encoder *a,
 			  b->cloneable & (1 << a->type));
 }
 
-static bool check_single_encoder_cloning(struct drm_atomic_state *state,
+static bool check_single_encoder_cloning(struct intel_atomic_state *state,
 					 struct intel_crtc *crtc,
 					 struct intel_encoder *encoder)
 {
@@ -12692,7 +12692,7 @@ static bool check_single_encoder_cloning(struct drm_atomic_state *state,
 	struct drm_connector_state *connector_state;
 	int i;
 
-	for_each_new_connector_in_state(state, connector, connector_state, i) {
+	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
 		if (connector_state->crtc != &crtc->base)
 			continue;
 
@@ -13471,13 +13471,15 @@ static bool check_digital_port_conflicts(struct intel_atomic_state *state)
 }
 
 static void
-intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_crtc_state *crtc_state)
+intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_atomic_state *state,
+					   struct intel_crtc_state *crtc_state)
 {
 	intel_crtc_copy_color_blobs(crtc_state);
 }
 
 static void
-intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
+intel_crtc_copy_uapi_to_hw_state(struct intel_atomic_state *state,
+				 struct intel_crtc_state *crtc_state)
 {
 	crtc_state->hw.enable = crtc_state->uapi.enable;
 	crtc_state->hw.active = crtc_state->uapi.active;
@@ -13485,7 +13487,7 @@ intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
 	crtc_state->hw.pipe_mode = crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;
 	crtc_state->hw.scaling_filter = crtc_state->uapi.scaling_filter;
 
-	intel_crtc_copy_uapi_to_hw_state_nomodeset(crtc_state);
+	intel_crtc_copy_uapi_to_hw_state_nomodeset(state, crtc_state);
 }
 
 static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state)
@@ -13508,7 +13510,8 @@ static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state
 }
 
 static int
-intel_crtc_prepare_cleared_state(struct intel_crtc_state *crtc_state)
+intel_crtc_prepare_cleared_state(struct intel_atomic_state *state,
+				 struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
@@ -13540,16 +13543,16 @@ intel_crtc_prepare_cleared_state(struct intel_crtc_state *crtc_state)
 	memcpy(crtc_state, saved_state, sizeof(*crtc_state));
 	kfree(saved_state);
 
-	intel_crtc_copy_uapi_to_hw_state(crtc_state);
+	intel_crtc_copy_uapi_to_hw_state(state, crtc_state);
 
 	return 0;
 }
 
 static int
-intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
+intel_modeset_pipe_config(struct intel_atomic_state *state,
+			  struct intel_crtc_state *pipe_config)
 {
 	struct drm_crtc *crtc = pipe_config->uapi.crtc;
-	struct drm_atomic_state *state = pipe_config->uapi.state;
 	struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
 	struct drm_connector *connector;
 	struct drm_connector_state *connector_state;
@@ -13591,7 +13594,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
 			       &pipe_config->pipe_src_w,
 			       &pipe_config->pipe_src_h);
 
-	for_each_new_connector_in_state(state, connector, connector_state, i) {
+	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
 		struct intel_encoder *encoder =
 			to_intel_encoder(connector_state->best_encoder);
 
@@ -13629,7 +13632,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
 	 * adjust it according to limitations or connector properties, and also
 	 * a chance to reject the mode entirely.
 	 */
-	for_each_new_connector_in_state(state, connector, connector_state, i) {
+	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
 		struct intel_encoder *encoder =
 			to_intel_encoder(connector_state->best_encoder);
 
@@ -15245,19 +15248,19 @@ static int intel_atomic_check(struct drm_device *dev,
 					    new_crtc_state, i) {
 		if (!needs_modeset(new_crtc_state)) {
 			/* Light copy */
-			intel_crtc_copy_uapi_to_hw_state_nomodeset(new_crtc_state);
+			intel_crtc_copy_uapi_to_hw_state_nomodeset(state, new_crtc_state);
 
 			continue;
 		}
 
-		ret = intel_crtc_prepare_cleared_state(new_crtc_state);
+		ret = intel_crtc_prepare_cleared_state(state, new_crtc_state);
 		if (ret)
 			goto fail;
 
 		if (!new_crtc_state->hw.enable)
 			continue;
 
-		ret = intel_modeset_pipe_config(new_crtc_state);
+		ret = intel_modeset_pipe_config(state, new_crtc_state);
 		if (ret)
 			goto fail;
 	}
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-11-06  4:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-06  4:03 [Intel-gfx] [PATCH v15 00/14] Big Joiner End End enabling with 8K@30, 60 Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 01/14] drm/i915/dp: Some reshuffling in mode_valid as prep for bigjoiner modes Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 02/14] drm/i915: Move encoder->get_config to a new function Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 03/14] drm/i915/dp: Add a wrapper function around get_pipe_config Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 04/14] drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split Manasi Navare
2020-11-06  4:03 ` Manasi Navare [this message]
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 06/14] drm/i915/dp: Add from_crtc_state to copy color blobs Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 07/14] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3 Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 08/14] drm/i915: Try to make bigjoiner work in atomic check Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 09/14] drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave Manasi Navare
2020-11-10 16:54   ` Manna, Animesh
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 10/14] drm/i915/dp: Master/Slave enable/disable sequence for bigjoiner Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 11/14] drm/i915: HW state readout for Bigjoiner case Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 12/14] drm/i915: Link planes in a bigjoiner configuration, v3 Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 13/14] drm/i915: Add bigjoiner aware plane clipping checks Manasi Navare
2020-11-06  4:03 ` [Intel-gfx] [PATCH v15 14/14] drm/i915: Add debugfs dumping for bigjoiner, v3 Manasi Navare
2020-11-06  4:41 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Big Joiner End End enabling with 8K@30, 60 Patchwork
2020-11-06  4:42 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-11-06  5:12 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201106040355.12809-6-manasi.d.navare@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox