From: Matthew Wilcox <willy@infradead.org>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] Missing DPPLL case on i7-1165G7
Date: Mon, 21 Dec 2020 04:07:58 +0000 [thread overview]
Message-ID: <20201221040758.GA874@casper.infradead.org> (raw)
At boot,
[ 2.787995] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[ 2.788001] i915 0000:00:02.0: [drm] *ERROR* LSPCON init failed on port E
[ 2.790752] ------------[ cut here ]------------
[ 2.790753] Missing case (clock == 539440)
[ 2.790790] WARNING: CPU: 0 PID: 159 at drivers/gpu/drm/i915/display/intel_dpll_mgr.c:2967 icl_get_dplls+0x53a/0xa50 [i915]
In drivers/gpu/drm/i915/display/intel_dpll_mgr.c, I see an entry for 540,000.
Presumbly, this clock was supposed to be rounded up to that somewhere.
This is an HP Spectre x360 using the internal display. Here's the EDID
in case that's useful:
$ edid-decode /sys/class/drm/card0-eDP-1/edid
edid-decode (hex):
00 ff ff ff ff ff ff 00 4c 83 49 41 00 00 00 00
13 1d 01 04 b5 1d 11 78 02 38 d1 ae 51 3b b8 23
0b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 b9 d5 00 40 f1 70 20 80 30 20
88 00 26 a5 10 00 00 1b b9 d5 00 40 f1 70 20 80
30 20 88 00 26 a5 10 00 00 1b 00 00 00 0f 00 ff
09 3c ff 09 3c 2c 80 00 00 00 00 00 00 00 00 10
00 00 01 00 00 00 00 00 00 00 00 00 00 00 01 af
02 03 0f 00 e3 05 80 00 e6 06 05 01 73 6d 07 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ab
----------------
EDID version: 1.4
Manufacturer: SDC Model 16713 Serial Number 0
Made in week 19 of 2019
Digital display
10 bits per primary color channel
DisplayPort interface
Maximum image size: 29 cm x 17 cm
Gamma: 2.20
Supported color formats: RGB 4:4:4
First detailed timing includes the native pixel format and preferred refresh rate
Color Characteristics
Red: 0.6796, 0.3193
Green: 0.2324, 0.7187
Blue: 0.1396, 0.0439
White: 0.3125, 0.3291
Established Timings I & II: none
Standard Timings: none
Detailed mode: Clock 547.130 MHz, 294 mm x 165 mm
3840 3888 3920 4160 ( 48 32 240)
2160 2168 2176 2192 ( 8 8 16)
+hsync -vsync
VertFreq: 60.001 Hz, HorFreq: 131.522 kHz
Detailed mode: Clock 547.130 MHz, 294 mm x 165 mm
3840 3888 3920 4160 ( 48 32 240)
2160 2168 2176 2192 ( 8 8 16)
+hsync -vsync
VertFreq: 60.001 Hz, HorFreq: 131.522 kHz
Manufacturer-Specified Display Descriptor (0x0f): 00 0f 00 ff 09 3c ff 09 3c 2c 80 00 00 00 00 00 .....<..<,......
Dummy Descriptor
Has 1 extension block
Checksum: 0xaf
----------------
CTA-861 Extension Block Revision 3
0 native detailed modes
11 bytes of CTA data blocks
Extended tag: Colorimetry Data Block
BT2020RGB
Extended tag: HDR Static Metadata Data Block
Electro optical transfer functions:
Traditional gamma - SDR luminance range
SMPTE ST2084
Supported static metadata descriptors:
Static metadata type 1
Desired content max luminance: 115 (603.666 cd/m^2)
Desired content max frame-average luminance: 109 (530.095 cd/m^2)
Desired content min luminance: 7 (0.005 cd/m^2)
Checksum: 0xab
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2020-12-21 4:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-21 4:07 Matthew Wilcox [this message]
2020-12-29 14:41 ` [Intel-gfx] Missing DPPLL case on i7-1165G7 Imre Deak
2021-01-05 5:50 ` Matthew Wilcox
2021-01-06 17:25 ` Imre Deak
2021-01-08 17:53 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201221040758.GA874@casper.infradead.org \
--to=willy@infradead.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox