Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lyude Paul <lyude@redhat.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>,
	open list <linux-kernel@vger.kernel.org>,
	David Airlie <airlied@linux.ie>,
	Sean Paul <seanpaul@chromium.org>,
	"open list:DRM DRIVERS" <dri-devel@lists.freedesktop.org>,
	Aaron Ma <aaron.ma@canonical.com>,
	Dave Airlie <airlied@redhat.com>
Subject: [Intel-gfx] [PATCH] drm/i915/dp: Don't use DPCD backlights that need PWM enable/disable
Date: Thu, 21 Jan 2021 13:36:43 -0500	[thread overview]
Message-ID: <20210121183644.2627282-1-lyude@redhat.com> (raw)

We haven't yet implemented support for backlights that need to be
enabled/disabled via PWM instead of AUX, which means we'll break things if
we enable DPCD backlight control on these machines. Luckily though since
most of these machines work fine just using the plain PWM backlight
controls anyway, there shouldn't be any issue with just leaving DPCD
backlight controls disabled in such situations.

This should fix the issues with PWM being left on that were being observed
on fi-bdw-samus.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Testcase: igt/gem_exec_suspend/basic-s0 # fi-bdw-samus
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index 31a478f63d52..651884390137 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -586,9 +586,14 @@ intel_dp_aux_supports_vesa_backlight(struct intel_connector *connector)
 	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
 	/* Check the eDP Display control capabilities registers to determine if
-	 * the panel can support backlight control over the aux channel
+	 * the panel can support backlight control over the aux channel.
+	 *
+	 * TODO: We currently only support AUX only backlight configurations, not backlights which
+	 * require a mix of PWM and AUX controls to work. In the mean time, these machines typically
+	 * work just fine using normal PWM controls anyway.
 	 */
 	if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
+	    (intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) &&
 	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
 		drm_dbg_kms(&i915->drm, "AUX Backlight Control Supported!\n");
 		return true;
-- 
2.29.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2021-01-21 18:37 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-21 18:36 Lyude Paul [this message]
2021-01-22  2:40 ` [Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915/dp: Don't use DPCD backlights that need PWM enable/disable Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210121183644.2627282-1-lyude@redhat.com \
    --to=lyude@redhat.com \
    --cc=aaron.ma@canonical.com \
    --cc=airlied@linux.ie \
    --cc=airlied@redhat.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=seanpaul@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox