From: Matthew Brost <matthew.brost@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <dri-devel@lists.freedesktop.org>
Subject: [Intel-gfx] [PATCH 1/3] drm/i915/guc: Introduce unified HXG messages
Date: Tue, 15 Jun 2021 17:13:00 -0700 [thread overview]
Message-ID: <20210616001302.84233-2-matthew.brost@intel.com> (raw)
In-Reply-To: <20210616001302.84233-1-matthew.brost@intel.com>
From: Michal Wajdeczko <michal.wajdeczko@intel.com>
New GuC firmware will unify format of MMIO and CTB H2G messages.
Introduce their definitions now to allow gradual transition of
our code to match new changes.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
---
.../gpu/drm/i915/gt/uc/abi/guc_messages_abi.h | 213 ++++++++++++++++++
1 file changed, 213 insertions(+)
diff --git a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
index 775e21f3058c..29ac823acd4c 100644
--- a/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
+++ b/drivers/gpu/drm/i915/gt/uc/abi/guc_messages_abi.h
@@ -6,6 +6,219 @@
#ifndef _ABI_GUC_MESSAGES_ABI_H
#define _ABI_GUC_MESSAGES_ABI_H
+/**
+ * DOC: HXG Message
+ *
+ * All messages exchanged with GuC are defined using 32 bit dwords.
+ * First dword is treated as a message header. Remaining dwords are optional.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | | | |
+ * | 0 | 31 | **ORIGIN** - originator of the message |
+ * | | | - _`GUC_HXG_ORIGIN_HOST` = 0 |
+ * | | | - _`GUC_HXG_ORIGIN_GUC` = 1 |
+ * | | | |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | **TYPE** - message type |
+ * | | | - _`GUC_HXG_TYPE_REQUEST` = 0 |
+ * | | | - _`GUC_HXG_TYPE_EVENT` = 1 |
+ * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_BUSY` = 3 |
+ * | | | - _`GUC_HXG_TYPE_NO_RESPONSE_RETRY` = 5 |
+ * | | | - _`GUC_HXG_TYPE_RESPONSE_FAILURE` = 6 |
+ * | | | - _`GUC_HXG_TYPE_RESPONSE_SUCCESS` = 7 |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **AUX** - auxiliary data (depends on TYPE) |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **PAYLOAD** - optional payload (depends on TYPE) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_MSG_MIN_LEN 1u
+#define GUC_HXG_MSG_0_ORIGIN (0x1 << 31)
+#define GUC_HXG_ORIGIN_HOST 0u
+#define GUC_HXG_ORIGIN_GUC 1u
+#define GUC_HXG_MSG_0_TYPE (0x7 << 28)
+#define GUC_HXG_TYPE_REQUEST 0u
+#define GUC_HXG_TYPE_EVENT 1u
+#define GUC_HXG_TYPE_NO_RESPONSE_BUSY 3u
+#define GUC_HXG_TYPE_NO_RESPONSE_RETRY 5u
+#define GUC_HXG_TYPE_RESPONSE_FAILURE 6u
+#define GUC_HXG_TYPE_RESPONSE_SUCCESS 7u
+#define GUC_HXG_MSG_0_AUX (0xfffffff << 0)
+#define GUC_HXG_MSG_n_PAYLOAD (0xffffffff << 0)
+
+/**
+ * DOC: HXG Request
+ *
+ * The `HXG Request`_ message should be used to initiate synchronous activity
+ * for which confirmation or return data is expected.
+ *
+ * The recipient of this message shall use `HXG Response`_, `HXG Failure`_
+ * or `HXG Retry`_ message as a definite reply, and may use `HXG Busy`_
+ * message as a intermediate reply.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **DATA0** - request data (depends on ACTION) |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ACTION** - requested action code |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - optional data (depends on ACTION) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_REQUEST_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_REQUEST_MSG_0_DATA0 (0xfff << 16)
+#define GUC_HXG_REQUEST_MSG_0_ACTION (0xffff << 0)
+#define GUC_HXG_REQUEST_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/**
+ * DOC: HXG Event
+ *
+ * The `HXG Event`_ message should be used to initiate asynchronous activity
+ * that does not involves immediate confirmation nor data.
+ *
+ * Format of @DATA0 and all @DATAn fields depends on the @ACTION code.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_EVENT_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **DATA0** - event data (depends on ACTION) |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ACTION** - event action code |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - optional event data (depends on ACTION) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_EVENT_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_EVENT_MSG_0_DATA0 (0xfff << 16)
+#define GUC_HXG_EVENT_MSG_0_ACTION (0xffff << 0)
+#define GUC_HXG_EVENT_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/**
+ * DOC: HXG Busy
+ *
+ * The `HXG Busy`_ message may be used to acknowledge reception of the `HXG Request`_
+ * message if the recipient expects that it processing will be longer than default
+ * timeout.
+ *
+ * The @COUNTER field may be used as a progress indicator.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_BUSY_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **COUNTER** - progress indicator |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_BUSY_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_BUSY_MSG_0_COUNTER GUC_HXG_MSG_0_AUX
+
+/**
+ * DOC: HXG Retry
+ *
+ * The `HXG Retry`_ message should be used by recipient to indicate that the
+ * `HXG Request`_ message was dropped and it should be resent again.
+ *
+ * The @REASON field may be used to provide additional information.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_NO_RESPONSE_RETRY_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **REASON** - reason for retry |
+ * | | | - _`GUC_HXG_RETRY_REASON_UNSPECIFIED` = 0 |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RETRY_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RETRY_MSG_0_REASON GUC_HXG_MSG_0_AUX
+#define GUC_HXG_RETRY_REASON_UNSPECIFIED 0u
+
+/**
+ * DOC: HXG Failure
+ *
+ * The `HXG Failure`_ message shall be used as a reply to the `HXG Request`_
+ * message that could not be processed due to an error.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_FAILURE_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:16 | **HINT** - additional error hint |
+ * | +-------+--------------------------------------------------------------+
+ * | | 15:0 | **ERROR** - error/result code |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_FAILURE_MSG_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_FAILURE_MSG_0_HINT (0xfff << 16)
+#define GUC_HXG_FAILURE_MSG_0_ERROR (0xffff << 0)
+
+/**
+ * DOC: HXG Response
+ *
+ * The `HXG Response`_ message shall be used as a reply to the `HXG Request`_
+ * message that was successfully processed without an error.
+ *
+ * +---+-------+--------------------------------------------------------------+
+ * | | Bits | Description |
+ * +===+=======+==============================================================+
+ * | 0 | 31 | ORIGIN |
+ * | +-------+--------------------------------------------------------------+
+ * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ |
+ * | +-------+--------------------------------------------------------------+
+ * | | 27:0 | **DATA0** - data (depends on ACTION from `HXG Request`_) |
+ * +---+-------+--------------------------------------------------------------+
+ * | 1 | 31:0 | |
+ * +---+-------+ |
+ * |...| | **DATAn** - data (depends on ACTION from `HXG Request`_) |
+ * +---+-------+ |
+ * | n | 31:0 | |
+ * +---+-------+--------------------------------------------------------------+
+ */
+
+#define GUC_HXG_RESPONSE_MSG_MIN_LEN GUC_HXG_MSG_MIN_LEN
+#define GUC_HXG_RESPONSE_MSG_0_DATA0 GUC_HXG_MSG_0_AUX
+#define GUC_HXG_RESPONSE_MSG_n_DATAn GUC_HXG_MSG_n_PAYLOAD
+
+/* deprecated */
#define INTEL_GUC_MSG_TYPE_SHIFT 28
#define INTEL_GUC_MSG_TYPE_MASK (0xF << INTEL_GUC_MSG_TYPE_SHIFT)
#define INTEL_GUC_MSG_DATA_SHIFT 16
--
2.28.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-06-15 23:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-16 0:12 [Intel-gfx] [PATCH 0/3] Update firmware to v62.0.0 Matthew Brost
2021-06-16 0:13 ` Matthew Brost [this message]
2021-06-16 0:13 ` [Intel-gfx] [PATCH 2/3] drm/i915/guc: " Matthew Brost
2021-06-17 1:41 ` Daniele Ceraolo Spurio
2021-06-17 6:24 ` Michal Wajdeczko
2021-06-16 0:13 ` [Intel-gfx] [PATCH 3/3] drm/i915/doc: Include GuC ABI documentation Matthew Brost
2021-06-16 0:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Update firmware to v62.0.0 (rev4) Patchwork
2021-06-16 0:22 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-06-16 0:49 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-06-16 6:04 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2021-06-18 22:38 ` Matt Roper
2021-06-16 15:16 ` [Intel-gfx] [PATCH 0/3] Update firmware to v62.0.0 Mike Lothian
-- strict thread matches above, loose matches on Subject: below --
2021-06-14 19:42 Matthew Brost
2021-06-14 19:42 ` [Intel-gfx] [PATCH 1/3] drm/i915/guc: Introduce unified HXG messages Matthew Brost
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210616001302.84233-2-matthew.brost@intel.com \
--to=matthew.brost@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox