Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v3 27/30] drm/i915/dg2: Wait for SNPS PHY calibration during display init
Date: Fri, 23 Jul 2021 10:42:36 -0700	[thread overview]
Message-ID: <20210723174239.1551352-28-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210723174239.1551352-1-matthew.d.roper@intel.com>

Initialization of the PHY is handled by the hardware/firmware, but the
driver should wait up to 25ms for the PHY to report that its calibration
has completed.

Bspec: 49189
Bspec: 50107
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
---
 .../gpu/drm/i915/display/intel_display_power.c    |  5 +++++
 drivers/gpu/drm/i915/display/intel_snps_phy.c     | 15 +++++++++++++++
 drivers/gpu/drm/i915/display/intel_snps_phy.h     |  3 +++
 drivers/gpu/drm/i915/i915_reg.h                   |  1 +
 4 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 81efc77bada0..39cb55f3a648 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -18,6 +18,7 @@
 #include "intel_pm.h"
 #include "intel_pps.h"
 #include "intel_sideband.h"
+#include "intel_snps_phy.h"
 #include "intel_tc.h"
 #include "intel_vga.h"
 
@@ -5901,6 +5902,10 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
 	if (DISPLAY_VER(dev_priv) >= 12)
 		tgl_bw_buddy_init(dev_priv);
 
+	/* 8. Ensure PHYs have completed calibration and adaptation */
+	if (IS_DG2(dev_priv))
+		intel_snps_phy_wait_for_calibration(dev_priv);
+
 	if (resume && intel_dmc_has_payload(dev_priv))
 		intel_dmc_load_program(dev_priv);
 
diff --git a/drivers/gpu/drm/i915/display/intel_snps_phy.c b/drivers/gpu/drm/i915/display/intel_snps_phy.c
index 77759bda98a4..f0c30d3d2dfb 100644
--- a/drivers/gpu/drm/i915/display/intel_snps_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_snps_phy.c
@@ -21,6 +21,21 @@
  * since it is not handled by the shared DPLL framework as on other platforms.
  */
 
+void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv)
+{
+	enum phy phy;
+
+	for_each_phy_masked(phy, ~0) {
+		if (!intel_phy_is_snps(dev_priv, phy))
+			continue;
+
+		if (intel_de_wait_for_clear(dev_priv, ICL_PHY_MISC(phy),
+					    DG2_PHY_DP_TX_ACK_MASK, 25))
+			DRM_ERROR("SNPS PHY %c failed to calibrate after 25ms.\n",
+				  phy);
+	}
+}
+
 static const u32 dg2_ddi_translations[] = {
 	/* VS 0, pre-emph 0 */
 	REG_FIELD_PREP(SNPS_PHY_TX_EQ_MAIN, 26),
diff --git a/drivers/gpu/drm/i915/display/intel_snps_phy.h b/drivers/gpu/drm/i915/display/intel_snps_phy.h
index 3ce92d424f66..6aa33ff729ec 100644
--- a/drivers/gpu/drm/i915/display/intel_snps_phy.h
+++ b/drivers/gpu/drm/i915/display/intel_snps_phy.h
@@ -8,10 +8,13 @@
 
 #include <linux/types.h>
 
+struct drm_i915_private;
 struct intel_encoder;
 struct intel_crtc_state;
 struct intel_mpllb_state;
 
+void intel_snps_phy_wait_for_calibration(struct drm_i915_private *dev_priv);
+
 int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state,
 			   struct intel_encoder *encoder);
 void intel_mpllb_enable(struct intel_encoder *encoder,
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2e028350c32d..d990f9364157 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -12461,6 +12461,7 @@ enum skl_power_gate {
 						 _ICL_PHY_MISC_B)
 #define  ICL_PHY_MISC_MUX_DDID			(1 << 28)
 #define  ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN	(1 << 23)
+#define  DG2_PHY_DP_TX_ACK_MASK			REG_GENMASK(23, 20)
 
 /* Icelake Display Stream Compression Registers */
 #define DSCA_PICTURE_PARAMETER_SET_0		_MMIO(0x6B200)
-- 
2.25.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-07-23 17:43 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-23 17:42 [Intel-gfx] [PATCH v3 00/30] Begin enabling Xe_HP SDV and DG2 platforms Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 01/30] drm/i915/xehpsdv: Correct parameters for IS_XEHPSDV_GT_STEP() Matt Roper
2021-07-27 18:34   ` Yokoyama, Caz
2021-07-27 18:38     ` Matt Roper
2021-07-27 19:00       ` Yokoyama, Caz
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 02/30] drm/i915/xehp: Extra media engines - Part 1 (engine definitions) Matt Roper
2021-07-23 17:54   ` Lucas De Marchi
2021-07-23 17:55     ` Matt Roper
2021-07-23 19:10     ` [Intel-gfx] [PATCH v4 2/2] " Matt Roper
2021-07-24  0:47       ` Lucas De Marchi
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 03/30] drm/i915/xehp: Extra media engines - Part 2 (interrupts) Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 04/30] drm/i915/xehp: Extra media engines - Part 3 (reset) Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 05/30] drm/i915/xehp: Xe_HP forcewake support Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 06/30] drm/i915/xehp: handle new steering options Matt Roper
2021-07-27 19:11   ` Yokoyama, Caz
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 07/30] drm/i915/xehp: Loop over all gslices for INSTDONE processing Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 08/30] drm/i915/xehp: Changes to ss/eu definitions Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 09/30] drm/i915/xehpsdv: Add maximum sseu limits Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 10/30] drm/i915/xehpsdv: Add compute DSS type Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 11/30] drm/i915/xehpsdv: Define steering tables Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 12/30] drm/i915/xehpsdv: Define MOCS table for XeHP SDV Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 13/30] drm/i915/xehpsdv: factor out function to read RP_STATE_CAP Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 14/30] drm/i915/xehpsdv: Read correct RP_STATE_CAP register Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 15/30] drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 16/30] drm/i915/dg2: Add forcewake table Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 17/30] drm/i915/dg2: Update LNCF steering ranges Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 18/30] drm/i915/dg2: Add SQIDI steering Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 19/30] drm/i915/dg2: Add new LRI reg offsets Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 20/30] drm/i915/dg2: Maintain backward-compatible nested batch behavior Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 21/30] drm/i915/dg2: Report INSTDONE_GEOM values in error state Matt Roper
2021-07-29 15:08   ` Matt Atwood
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 22/30] drm/i915/dg2: Define MOCS table for DG2 Matt Roper
2021-07-29 15:14   ` Matt Atwood
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 23/30] drm/i915/dg2: Add MPLLB programming for SNPS PHY Matt Roper
2021-07-29 15:06   ` Matt Atwood
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 24/30] drm/i915/dg2: Add MPLLB programming for HDMI Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 25/30] drm/i915/dg2: Add vswing programming for SNPS phys Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 26/30] drm/i915/dg2: Update modeset sequences Matt Roper
2021-07-23 17:42 ` Matt Roper [this message]
2021-07-24  4:19   ` [Intel-gfx] [PATCH v3 27/30] drm/i915/dg2: Wait for SNPS PHY calibration during display init kernel test robot
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 28/30] drm/i915/dg2: Update lane disable power state during PSR Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 29/30] drm/i915/dg2: Update to bigjoiner path Matt Roper
2021-07-23 17:42 ` [Intel-gfx] [PATCH v3 30/30] drm/i915/dg2: Configure PCON in DP pre-enable path Matt Roper
2021-07-23 21:21 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Begin enabling Xe_HP SDV and DG2 platforms (rev6) Patchwork
2021-07-23 21:23 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-07-23 21:51 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210723174239.1551352-28-matthew.d.roper@intel.com \
    --to=matthew.d.roper@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox