From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Subject: [Intel-gfx] [PATCH] drm/i915: Apply CMTG clock disabling WA while DPLL0 is enabled
Date: Mon, 2 Aug 2021 22:01:48 +0300 [thread overview]
Message-ID: <20210802190148.2099625-1-imre.deak@intel.com> (raw)
CI test results/further experiments show that the workaround added in
commit 573d7ce4f69a ("drm/i915/adlp: Add workaround to disable CMTG clock gating")
can be applied only while DPLL0 is enabled. If it's disabled the
TRANS_CMTG_CHICKEN register is not accessible. Accordingly move the WA
to DPLL0 HW state sanitization and enabling.
This fixes an issue where the WA won't get applied (and a WARN is thrown
due to an unexpected value in TRANS_CMTG_CHICKEN) if the driver is
loaded without DPLL0 being enabled: booting without BIOS enabling an
output with this PLL, or reloading the driver.
While at it also add a debug print for the unexpected register value.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 18 ----------
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 34 ++++++++++++++++++-
2 files changed, 33 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 4ca354f154215..98f7fbede6226 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -13284,24 +13284,6 @@ static void intel_early_display_was(struct drm_i915_private *dev_priv)
KBL_ARB_FILL_SPARE_13 | KBL_ARB_FILL_SPARE_14,
KBL_ARB_FILL_SPARE_14);
}
-
- if (IS_ADLP_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) {
- u32 val;
-
- /*
- * Wa_16011069516:adl-p[a0]
- *
- * All CMTG regs are unreliable until CMTG clock gating is
- * disabled, so we can only assume the default CMTG_CHICKEN
- * reg value and sanity check this assumption with a double
- * read, which presumably returns the correct value even with
- * clock gating on.
- */
- val = intel_de_read(dev_priv, TRANS_CMTG_CHICKEN);
- val = intel_de_read(dev_priv, TRANS_CMTG_CHICKEN);
- intel_de_write(dev_priv, TRANS_CMTG_CHICKEN, DISABLE_DPT_CLK_GATING);
- drm_WARN_ON(&dev_priv->drm, val & ~DISABLE_DPT_CLK_GATING);
- }
}
static void ibx_sanitize_pch_hdmi_port(struct drm_i915_private *dev_priv,
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 0d72917e5670f..5c91d125a3371 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3735,6 +3735,31 @@ static void icl_pll_enable(struct drm_i915_private *dev_priv,
drm_err(&dev_priv->drm, "PLL %d not locked\n", pll->info->id);
}
+static void adlp_cmtg_clock_gating_wa(struct drm_i915_private *i915, struct intel_shared_dpll *pll)
+{
+ u32 val;
+
+ if (!IS_ADLP_DISPLAY_STEP(i915, STEP_A0, STEP_B0) ||
+ pll->info->id != DPLL_ID_ICL_DPLL0)
+ return;
+ /*
+ * Wa_16011069516:adl-p[a0]
+ *
+ * All CMTG regs are unreliable until CMTG clock gating is disabled,
+ * so we can only assume the default TRANS_CMTG_CHICKEN reg value and
+ * sanity check this assumption with a double read, which presumably
+ * returns the correct value even with clock gating on.
+ *
+ * Instead of the usual place for workarounds we apply this one here,
+ * since TRANS_CMTG_CHICKEN is only accessible while DPLL0 is enabled.
+ */
+ val = intel_de_read(i915, TRANS_CMTG_CHICKEN);
+ val = intel_de_read(i915, TRANS_CMTG_CHICKEN);
+ intel_de_write(i915, TRANS_CMTG_CHICKEN, DISABLE_DPT_CLK_GATING);
+ if (drm_WARN_ON(&i915->drm, val & ~DISABLE_DPT_CLK_GATING))
+ drm_dbg_kms(&i915->drm, "Unexpected flags in TRANS_CMTG_CHICKEN: %08x\n", val);
+}
+
static void combo_pll_enable(struct drm_i915_private *dev_priv,
struct intel_shared_dpll *pll)
{
@@ -3764,6 +3789,8 @@ static void combo_pll_enable(struct drm_i915_private *dev_priv,
icl_pll_enable(dev_priv, pll, enable_reg);
+ adlp_cmtg_clock_gating_wa(dev_priv, pll);
+
/* DVFS post sequence would be here. See the comment above. */
}
@@ -4273,7 +4300,12 @@ void intel_dpll_readout_hw_state(struct drm_i915_private *i915)
static void sanitize_dpll_state(struct drm_i915_private *i915,
struct intel_shared_dpll *pll)
{
- if (!pll->on || pll->active_mask)
+ if (!pll->on)
+ return;
+
+ adlp_cmtg_clock_gating_wa(i915, pll);
+
+ if (pll->active_mask)
return;
drm_dbg_kms(&i915->drm,
--
2.27.0
next reply other threads:[~2021-08-02 19:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-02 19:01 Imre Deak [this message]
2021-08-02 20:01 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Apply CMTG clock disabling WA while DPLL0 is enabled Patchwork
2021-08-02 20:32 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-08-02 20:52 ` [Intel-gfx] [PATCH] " Souza, Jose
2021-08-02 21:07 ` Imre Deak
2021-08-02 21:16 ` Souza, Jose
2021-08-02 21:20 ` Imre Deak
2021-08-03 12:08 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for " Patchwork
2021-08-03 13:51 ` Imre Deak
2021-08-03 14:38 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-08-03 15:32 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-08-04 5:32 ` Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210802190148.2099625-1-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jose.souza@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox