public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Ramalingam C <ramalingam.c@intel.com>
To: Juston Li <juston.li@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	seanpaul@chromium.org, anshuman.gupta@intel.com,
	rodrigo.vivi@intel.com
Subject: Re: [Intel-gfx] [PATCH v3 3/3] drm/i915/hdcp: reuse rx_info for mst stream type1 capability check
Date: Wed, 11 Aug 2021 08:35:45 +0530	[thread overview]
Message-ID: <20210811030533.GC16096@intel.com> (raw)
In-Reply-To: <20210810235212.138721-4-juston.li@intel.com>

On 2021-08-10 at 16:52:12 -0700, Juston Li wrote:
> On some MST docking stations, rx_info can only be read after
> RepeaterAuth_Send_ReceiverID_List and the RxStatus READY bit is set
> otherwise the read will return -EIO.
> 
> This behavior causes the mst stream type1 capability test to fail to
> read rx_info and determine if the topology supports type1 and fallback
> to type0.
> 
> To fix this, check for type1 capability when we receive rx_info within
> the AKE flow when we read RepeaterAuth_Send_ReceiverID_List instead
> of an explicit read just for type1 capability checking.
> 
> This does require moving where we set stream_types to after
> hdcp2_authenticate_sink() when we get rx_info but this occurs before we
> do hdcp2_propagate_stream_management_info.
> 
> Also, legacy HDCP 2.0/2.1 are not type 1 capable either so check for
> that as well.
> 
> Changes since v2:
>  - Remove no longer used variables in _intel_hdcp2_enable()

LGTM.

Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
> 
> Signed-off-by: Juston Li <juston.li@intel.com>
> ---
>  .../drm/i915/display/intel_display_types.h    |  2 +
>  drivers/gpu/drm/i915/display/intel_dp_hdcp.c  | 39 ---------------
>  drivers/gpu/drm/i915/display/intel_hdcp.c     | 49 ++++++++-----------
>  3 files changed, 23 insertions(+), 67 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index dbdfe54d0340..c8b687ff0374 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -516,6 +516,8 @@ struct intel_hdcp {
>  	enum transcoder cpu_transcoder;
>  	/* Only used for DP MST stream encryption */
>  	enum transcoder stream_transcoder;
> +
> +	bool topology_type1_capable;
>  };
>  
>  struct intel_connector {
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> index 526fd58b9b51..2d39af63ec9b 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> @@ -478,23 +478,6 @@ int intel_dp_hdcp2_write_msg(struct intel_digital_port *dig_port,
>  	return size;
>  }
>  
> -static int
> -get_rxinfo_hdcp_1_dev_downstream(struct intel_digital_port *dig_port, bool *hdcp_1_x)
> -{
> -	u8 rx_info[HDCP_2_2_RXINFO_LEN];
> -	int ret;
> -
> -	ret = drm_dp_dpcd_read(&dig_port->dp.aux,
> -			       DP_HDCP_2_2_REG_RXINFO_OFFSET,
> -			       (void *)rx_info, HDCP_2_2_RXINFO_LEN);
> -
> -	if (ret != HDCP_2_2_RXINFO_LEN)
> -		return ret >= 0 ? -EIO : ret;
> -
> -	*hdcp_1_x = HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) ? true : false;
> -	return 0;
> -}
> -
>  static
>  ssize_t get_receiver_id_list_rx_info(struct intel_digital_port *dig_port, u32 *dev_cnt, u8 *byte)
>  {
> @@ -664,27 +647,6 @@ int intel_dp_hdcp2_capable(struct intel_digital_port *dig_port,
>  	return 0;
>  }
>  
> -static
> -int intel_dp_mst_streams_type1_capable(struct intel_connector *connector,
> -				       bool *capable)
> -{
> -	struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
> -	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
> -	int ret;
> -	bool hdcp_1_x;
> -
> -	ret = get_rxinfo_hdcp_1_dev_downstream(dig_port, &hdcp_1_x);
> -	if (ret) {
> -		drm_dbg_kms(&i915->drm,
> -			    "[%s:%d] failed to read RxInfo ret=%d\n",
> -			    connector->base.name, connector->base.base.id, ret);
> -		return ret;
> -	}
> -
> -	*capable = !hdcp_1_x;
> -	return 0;
> -}
> -
>  static const struct intel_hdcp_shim intel_dp_hdcp_shim = {
>  	.write_an_aksv = intel_dp_hdcp_write_an_aksv,
>  	.read_bksv = intel_dp_hdcp_read_bksv,
> @@ -833,7 +795,6 @@ static const struct intel_hdcp_shim intel_dp_mst_hdcp_shim = {
>  	.stream_2_2_encryption = intel_dp_mst_hdcp2_stream_encryption,
>  	.check_2_2_link = intel_dp_mst_hdcp2_check_link,
>  	.hdcp_2_2_capable = intel_dp_hdcp2_capable,
> -	.streams_type1_capable = intel_dp_mst_streams_type1_capable,
>  	.protocol = HDCP_PROTOCOL_DP,
>  };
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
> index ebc2e32aec0b..1a2a98e2c6e3 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> @@ -33,21 +33,6 @@ static int intel_conn_to_vcpi(struct intel_connector *connector)
>  	return connector->port	? connector->port->vcpi.vcpi : 0;
>  }
>  
> -static bool
> -intel_streams_type1_capable(struct intel_connector *connector)
> -{
> -	const struct intel_hdcp_shim *shim = connector->hdcp.shim;
> -	bool capable = false;
> -
> -	if (!shim)
> -		return capable;
> -
> -	if (shim->streams_type1_capable)
> -		shim->streams_type1_capable(connector, &capable);
> -
> -	return capable;
> -}
> -
>  /*
>   * intel_hdcp_required_content_stream selects the most highest common possible HDCP
>   * content_type for all streams in DP MST topology because security f/w doesn't
> @@ -86,7 +71,7 @@ intel_hdcp_required_content_stream(struct intel_digital_port *dig_port)
>  		if (conn_dig_port != dig_port)
>  			continue;
>  
> -		if (!enforce_type0 && !intel_streams_type1_capable(connector))
> +		if (!enforce_type0 && !connector->hdcp.topology_type1_capable)
>  			enforce_type0 = true;
>  
>  		data->streams[data->k].stream_id = intel_conn_to_vcpi(connector);
> @@ -1632,6 +1617,14 @@ int hdcp2_authenticate_repeater_topology(struct intel_connector *connector)
>  		return -EINVAL;
>  	}
>  
> +	/*
> +	 * A topology is not Type 1 capable if it contains a downstream device
> +	 * that is HDCP 1.x or Legacy HDCP 2.0/2.1 compliant.
> +	 */
> +	hdcp->topology_type1_capable =
> +		!HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) &&
> +		!HDCP_2_2_HDCP_2_0_REP_CONNECTED(rx_info[1]);
> +
>  	/* Converting and Storing the seq_num_v to local variable as DWORD */
>  	seq_num_v =
>  		drm_hdcp_be24_to_cpu((const u8 *)msgs.recvid_list.seq_num_v);
> @@ -1871,11 +1864,23 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
>  {
>  	struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
>  	struct drm_i915_private *i915 = to_i915(connector->base.dev);
> +	struct hdcp_port_data *data = &dig_port->hdcp_port_data;
> +	struct intel_hdcp *hdcp = &connector->hdcp;
>  	int ret = 0, i, tries = 3;
>  
>  	for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) {
>  		ret = hdcp2_authenticate_sink(connector);
>  		if (!ret) {
> +			/* Stream which requires encryption */
> +			if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
> +				data->k = 1;
> +				data->streams[0].stream_type = hdcp->content_type;
> +			} else {
> +				ret = intel_hdcp_required_content_stream(dig_port);
> +				if (ret)
> +					return ret;
> +			}
> +
>  			ret = hdcp2_propagate_stream_management_info(connector);
>  			if (ret) {
>  				drm_dbg_kms(&i915->drm,
> @@ -1921,9 +1926,7 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
>  
>  static int _intel_hdcp2_enable(struct intel_connector *connector)
>  {
> -	struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
>  	struct drm_i915_private *i915 = to_i915(connector->base.dev);
> -	struct hdcp_port_data *data = &dig_port->hdcp_port_data;
>  	struct intel_hdcp *hdcp = &connector->hdcp;
>  	int ret;
>  
> @@ -1931,16 +1934,6 @@ static int _intel_hdcp2_enable(struct intel_connector *connector)
>  		    connector->base.name, connector->base.base.id,
>  		    hdcp->content_type);
>  
> -	/* Stream which requires encryption */
> -	if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
> -		data->k = 1;
> -		data->streams[0].stream_type = hdcp->content_type;
> -	} else {
> -		ret = intel_hdcp_required_content_stream(dig_port);
> -		if (ret)
> -			return ret;
> -	}
> -
>  	ret = hdcp2_authenticate_and_encrypt(connector);
>  	if (ret) {
>  		drm_dbg_kms(&i915->drm, "HDCP2 Type%d  Enabling Failed. (%d)\n",
> -- 
> 2.31.1
> 

  reply	other threads:[~2021-08-11  3:03 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-10 23:52 [Intel-gfx] [PATCH v3 0/3] drm/i915/hdcp: HDCP2.2 MST dock fixes Juston Li
2021-08-10 23:52 ` [Intel-gfx] [PATCH v3 1/3] drm/i915/hdcp: update cp_irq_count_cached in intel_dp_hdcp2_read_msg() Juston Li
2021-08-11  2:30   ` Ramalingam C
2021-08-10 23:52 ` [Intel-gfx] [PATCH v3 2/3] drm/i915/hdcp: read RxInfo once when reading RepeaterAuth_Send_ReceiverID_List Juston Li
2021-08-11  2:54   ` Ramalingam C
2021-08-11 19:34   ` Rodrigo Vivi
2021-08-11 20:14     ` Li, Juston
2021-08-10 23:52 ` [Intel-gfx] [PATCH v3 3/3] drm/i915/hdcp: reuse rx_info for mst stream type1 capability check Juston Li
2021-08-11  3:05   ` Ramalingam C [this message]
2021-08-11  0:02 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915/hdcp: HDCP2.2 MST dock fixes (rev3) Patchwork
2021-08-11  0:30 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2021-08-11 14:48 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915/hdcp: HDCP2.2 MST dock fixes (rev4) Patchwork
2021-08-11 15:17 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-08-11 17:00 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210811030533.GC16096@intel.com \
    --to=ramalingam.c@intel.com \
    --cc=anshuman.gupta@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=juston.li@intel.com \
    --cc=rodrigo.vivi@intel.com \
    --cc=seanpaul@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox