Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Shawn C <shawn.c.lee@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lee Shawn C <shawn.c.lee@intel.com>,
	Ville Syrjala <ville.syrjala@linux.intel.com>,
	Jani Nikula <jani.nikula@linux.intel.com>,
	Vandita Kulkarni <vandita.kulkarni@intel.com>,
	Cooper Chiou <cooper.chiou@intel.com>,
	William Tseng <william.tseng@intel.com>
Subject: [Intel-gfx] [PATCH 5/5] drm/i915/dsi: Read/write proper brightness value via MIPI DCS command
Date: Wed,  1 Sep 2021 16:54:45 +0800	[thread overview]
Message-ID: <20210901085445.427-6-shawn.c.lee@intel.com> (raw)
In-Reply-To: <20210901085445.427-1-shawn.c.lee@intel.com>

Driver has to swap the endian before send brightness level value
to tcon.

v2: Use __be16 instead of u16 to fix sparse warning.
v3: Send one or two bytes brightness value depend on the precision.

Reported-by: kernel test robot <lkp@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
---
 .../drm/i915/display/intel_dsi_dcs_backlight.c    | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
index 21ab9e1acb57..722411b5cb21 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
@@ -47,33 +47,36 @@ static u32 dcs_get_backlight(struct intel_connector *connector, enum pipe unused
 {
 	struct intel_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+	struct intel_panel *panel = &connector->panel;
 	struct mipi_dsi_device *dsi_device;
-	u8 data = 0;
+	u8 data[2] = {0, 0};
 	enum port port;
 
 	/* FIXME: Need to take care of 16 bit brightness level */
 	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
 		dsi_device = intel_dsi->dsi_hosts[port]->device;
 		mipi_dsi_dcs_read(dsi_device, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
-				  &data, sizeof(data));
+				  &data,
+				  (panel->backlight.max >> 8) ? sizeof(data) : 1);
 		break;
 	}
 
-	return data;
+	return ((data[1] << 8) | data[0]);
 }
 
 static void dcs_set_backlight(const struct drm_connector_state *conn_state, u32 level)
 {
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(to_intel_encoder(conn_state->best_encoder));
+	struct intel_panel *panel = &to_intel_connector(conn_state->connector)->panel;
 	struct mipi_dsi_device *dsi_device;
-	u8 data = level;
+	__be16 data = cpu_to_be16(level);
 	enum port port;
 
-	/* FIXME: Need to take care of 16 bit brightness level */
 	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
 		dsi_device = intel_dsi->dsi_hosts[port]->device;
 		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
-				   &data, sizeof(data));
+				   &data,
+				   (panel->backlight.max >> 8) ? sizeof(data) : 1);
 	}
 }
 
-- 
2.17.1


  parent reply	other threads:[~2021-09-01  8:52 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-01  8:54 [Intel-gfx] [PATCH 0/5] DSI driver improvement Lee Shawn C
2021-09-01  8:54 ` [Intel-gfx] [PATCH 1/5] drm/i915/dsi: wait for header and payload credit available Lee Shawn C
2021-09-01  8:54 ` [Intel-gfx] [PATCH 2/5] drm/i915/dsi: refine send MIPI DCS command sequence Lee Shawn C
2021-09-01  8:54 ` [Intel-gfx] [PATCH 3/5] drm/i915: Get proper min cdclk if vDSC enabled Lee Shawn C
2021-09-01  8:54 ` [Intel-gfx] [PATCH 4/5] drm/i915/dsi: Retrieve max brightness level from VBT Lee Shawn C
2021-09-01  8:54 ` Lee Shawn C [this message]
2021-09-01 15:32   ` [Intel-gfx] [PATCH 5/5] drm/i915/dsi: Read/write proper brightness value via MIPI DCS command Jani Nikula
2021-09-01  9:40 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for DSI driver improvement Patchwork
2021-09-01  9:41 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-09-01 10:09 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-09-01 11:58 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210901085445.427-6-shawn.c.lee@intel.com \
    --to=shawn.c.lee@intel.com \
    --cc=cooper.chiou@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=vandita.kulkarni@intel.com \
    --cc=ville.syrjala@linux.intel.com \
    --cc=william.tseng@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox