From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org, Karthik B S <karthik.b.s@intel.com>
Subject: [Intel-gfx] [PATCH 1/2] drm/i915: Extend the async flip VT-d w/a to skl/bxt
Date: Thu, 30 Sep 2021 22:09:42 +0300 [thread overview]
Message-ID: <20210930190943.17547-1-ville.syrjala@linux.intel.com> (raw)
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Looks like skl/bxt/derivatives also need the plane stride
stretch w/a when using async flips and VT-d is enabled, or
else we get corruption on screen. To my surprise this was
even documented in bspec, but only as a note on the
CHICHKEN_PIPESL register description rather than on the
w/a list.
So very much the same thing as on HSW/BDW, except the bits
moved yet again.
Cc: stable@vger.kernel.org
Cc: Karthik B S <karthik.b.s@intel.com>
Fixes: 55ea1cb178ef ("drm/i915: Enable async flips in i915")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 5 +++++
drivers/gpu/drm/i915/intel_pm.c | 12 ++++++++++++
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3a20a55d2512..29f6bfc2002d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8222,6 +8222,11 @@ enum {
#define HSW_SPR_STRETCH_MAX_X1 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 3)
#define HSW_FBCQ_DIS (1 << 22)
#define BDW_DPRS_MASK_VBLANK_SRD (1 << 0)
+#define SKL_PLANE1_STRETCH_MAX_MASK REG_GENMASK(1, 0)
+#define SKL_PLANE1_STRETCH_MAX_X8 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 0)
+#define SKL_PLANE1_STRETCH_MAX_X4 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 1)
+#define SKL_PLANE1_STRETCH_MAX_X2 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 2)
+#define SKL_PLANE1_STRETCH_MAX_X1 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 3)
#define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B)
#define _CHICKEN_TRANS_A 0x420c0
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index ef5f73934dab..74d4620a4999 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -76,6 +76,8 @@ struct intel_wm_config {
static void gen9_init_clock_gating(struct drm_i915_private *dev_priv)
{
+ enum pipe pipe;
+
if (HAS_LLC(dev_priv)) {
/*
* WaCompressedResourceDisplayNewHashMode:skl,kbl
@@ -89,6 +91,16 @@ static void gen9_init_clock_gating(struct drm_i915_private *dev_priv)
SKL_DE_COMPRESSED_HASH_MODE);
}
+ for_each_pipe(dev_priv, pipe) {
+ /*
+ * "Plane N strech max must be programmed to 11b (x1)
+ * when Async flips are enabled on that plane."
+ */
+ if (!IS_GEMINILAKE(dev_priv) && intel_vtd_active())
+ intel_uncore_rmw(&dev_priv->uncore, CHICKEN_PIPESL_1(pipe),
+ SKL_PLANE1_STRETCH_MAX_MASK, SKL_PLANE1_STRETCH_MAX_X1);
+ }
+
/* See Bspec note for PSR2_CTL bit 31, Wa#828:skl,bxt,kbl,cfl */
intel_uncore_write(&dev_priv->uncore, CHICKEN_PAR1_1,
intel_uncore_read(&dev_priv->uncore, CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP);
--
2.32.0
next reply other threads:[~2021-09-30 19:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-30 19:09 Ville Syrjala [this message]
2021-09-30 19:09 ` [Intel-gfx] [PATCH 2/2] drm/i195: Make the async flip VT-d workaround dynamic Ville Syrjala
2021-10-04 17:55 ` Matt Roper
2021-09-30 20:52 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for series starting with [1/2] drm/i915: Extend the async flip VT-d w/a to skl/bxt Patchwork
2021-09-30 21:20 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-10-01 2:40 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-10-01 21:08 ` [Intel-gfx] [PATCH 1/2] " Matt Roper
2021-10-01 22:01 ` Ville Syrjälä
2021-10-01 22:17 ` Ville Syrjälä
2021-10-04 17:50 ` Matt Roper
2021-10-04 19:09 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210930190943.17547-1-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=karthik.b.s@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox