From: Jani Nikula <jani.nikula@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com
Subject: [Intel-gfx] [PATCH] drm/i915/dcs: demote noisy drm_info() to drm_kms_dbg()
Date: Wed, 27 Oct 2021 16:59:00 +0300 [thread overview]
Message-ID: <20211027135900.6329-1-jani.nikula@intel.com> (raw)
The PPS, RC_RANGE_PARAM, and RC_BUF_THRESH logging are clearly for
debugging, and should not be info level messages.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
drivers/gpu/drm/i915/display/intel_vdsc.c | 32 +++++++++++------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index fa84be609d5d..bf8d3c7ca2d9 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -598,7 +598,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
pps_val |= DSC_422_ENABLE;
if (vdsc_cfg->vbr_enable)
pps_val |= DSC_VBR_ENABLE;
- drm_info(&dev_priv->drm, "PPS0 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS0 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_0,
pps_val);
@@ -622,7 +622,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
/* Populate PICTURE_PARAMETER_SET_1 registers */
pps_val = 0;
pps_val |= DSC_BPP(vdsc_cfg->bits_per_pixel);
- drm_info(&dev_priv->drm, "PPS1 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS1 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_1,
pps_val);
@@ -647,7 +647,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
pps_val = 0;
pps_val |= DSC_PIC_HEIGHT(vdsc_cfg->pic_height) |
DSC_PIC_WIDTH(vdsc_cfg->pic_width / num_vdsc_instances);
- drm_info(&dev_priv->drm, "PPS2 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS2 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_2,
pps_val);
@@ -672,7 +672,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
pps_val = 0;
pps_val |= DSC_SLICE_HEIGHT(vdsc_cfg->slice_height) |
DSC_SLICE_WIDTH(vdsc_cfg->slice_width);
- drm_info(&dev_priv->drm, "PPS3 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS3 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_3,
pps_val);
@@ -697,7 +697,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
pps_val = 0;
pps_val |= DSC_INITIAL_XMIT_DELAY(vdsc_cfg->initial_xmit_delay) |
DSC_INITIAL_DEC_DELAY(vdsc_cfg->initial_dec_delay);
- drm_info(&dev_priv->drm, "PPS4 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS4 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_4,
pps_val);
@@ -722,7 +722,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
pps_val = 0;
pps_val |= DSC_SCALE_INC_INT(vdsc_cfg->scale_increment_interval) |
DSC_SCALE_DEC_INT(vdsc_cfg->scale_decrement_interval);
- drm_info(&dev_priv->drm, "PPS5 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS5 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_5,
pps_val);
@@ -749,7 +749,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
DSC_FIRST_LINE_BPG_OFFSET(vdsc_cfg->first_line_bpg_offset) |
DSC_FLATNESS_MIN_QP(vdsc_cfg->flatness_min_qp) |
DSC_FLATNESS_MAX_QP(vdsc_cfg->flatness_max_qp);
- drm_info(&dev_priv->drm, "PPS6 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS6 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_6,
pps_val);
@@ -774,7 +774,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
pps_val = 0;
pps_val |= DSC_SLICE_BPG_OFFSET(vdsc_cfg->slice_bpg_offset) |
DSC_NFL_BPG_OFFSET(vdsc_cfg->nfl_bpg_offset);
- drm_info(&dev_priv->drm, "PPS7 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS7 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_7,
pps_val);
@@ -799,7 +799,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
pps_val = 0;
pps_val |= DSC_FINAL_OFFSET(vdsc_cfg->final_offset) |
DSC_INITIAL_OFFSET(vdsc_cfg->initial_offset);
- drm_info(&dev_priv->drm, "PPS8 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS8 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_8,
pps_val);
@@ -824,7 +824,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
pps_val = 0;
pps_val |= DSC_RC_MODEL_SIZE(vdsc_cfg->rc_model_size) |
DSC_RC_EDGE_FACTOR(DSC_RC_EDGE_FACTOR_CONST);
- drm_info(&dev_priv->drm, "PPS9 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS9 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_9,
pps_val);
@@ -851,7 +851,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
DSC_RC_QUANT_INC_LIMIT1(vdsc_cfg->rc_quant_incr_limit1) |
DSC_RC_TARGET_OFF_HIGH(DSC_RC_TGT_OFFSET_HI_CONST) |
DSC_RC_TARGET_OFF_LOW(DSC_RC_TGT_OFFSET_LO_CONST);
- drm_info(&dev_priv->drm, "PPS10 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS10 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_10,
pps_val);
@@ -879,7 +879,7 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
vdsc_cfg->slice_width) |
DSC_SLICE_ROW_PER_FRAME(vdsc_cfg->pic_height /
vdsc_cfg->slice_height);
- drm_info(&dev_priv->drm, "PPS16 = 0x%08x\n", pps_val);
+ drm_dbg_kms(&dev_priv->drm, "PPS16 = 0x%08x\n", pps_val);
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_PICTURE_PARAMETER_SET_16,
pps_val);
@@ -906,8 +906,8 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
rc_buf_thresh_dword[i / 4] |=
(u32)(vdsc_cfg->rc_buf_thresh[i] <<
BITS_PER_BYTE * (i % 4));
- drm_info(&dev_priv->drm, " RC_BUF_THRESH%d = 0x%08x\n", i,
- rc_buf_thresh_dword[i / 4]);
+ drm_dbg_kms(&dev_priv->drm, "RC_BUF_THRESH_%d = 0x%08x\n", i,
+ rc_buf_thresh_dword[i / 4]);
}
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_RC_BUF_THRESH_0,
@@ -963,8 +963,8 @@ static void intel_dsc_pps_configure(const struct intel_crtc_state *crtc_state)
RC_MAX_QP_SHIFT) |
(vdsc_cfg->rc_range_params[i].range_min_qp <<
RC_MIN_QP_SHIFT)) << 16 * (i % 2));
- drm_info(&dev_priv->drm, " RC_RANGE_PARAM_%d = 0x%08x\n", i,
- rc_range_params_dword[i / 2]);
+ drm_dbg_kms(&dev_priv->drm, "RC_RANGE_PARAM_%d = 0x%08x\n", i,
+ rc_range_params_dword[i / 2]);
}
if (!is_pipe_dsc(crtc, cpu_transcoder)) {
intel_de_write(dev_priv, DSCA_RC_RANGE_PARAMETERS_0,
--
2.30.2
next reply other threads:[~2021-10-27 13:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-27 13:59 Jani Nikula [this message]
2021-10-27 16:58 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/dcs: demote noisy drm_info() to drm_kms_dbg() Patchwork
2021-10-27 19:42 ` [Intel-gfx] [PATCH] " Navare, Manasi
2021-10-28 9:52 ` Jani Nikula
2021-10-27 21:59 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211027135900.6329-1-jani.nikula@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox