[Intel-gfx] [PATCH 1/3] drm/debug: Expose connector's max supported bpc via debugfs

[Bhanuprakash Modem <bhanuprakash.modem@intel.com>]

It's useful to know the connector's max supported bpc for IGT
testing. Expose it via a debugfs file on the connector "output_bpc".

Example: cat /sys/kernel/debug/dri/0/DP-1/output_bpc

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
---
 drivers/gpu/drm/drm_debugfs.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index 7f1b82dbaebb..33e5345c6f3e 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -395,6 +395,23 @@ static int vrr_range_show(struct seq_file *m, void *data)
 }
 DEFINE_SHOW_ATTRIBUTE(vrr_range);
 
+/*
+ * Returns Connector's max supported bpc through debugfs file.
+ * Example usage: cat /sys/kernel/debug/dri/0/DP-1/max_bpc
+ */
+static int output_bpc_show(struct seq_file *m, void *data)
+{
+	struct drm_connector *connector = m->private;
+
+	if (connector->status != connector_status_connected)
+		return -ENODEV;
+
+	seq_printf(m, "Maximum: %u\n", connector->display_info.bpc);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(output_bpc);
+
 static const struct file_operations drm_edid_fops = {
 	.owner = THIS_MODULE,
 	.open = edid_open,
@@ -437,6 +454,10 @@ void drm_debugfs_connector_add(struct drm_connector *connector)
 	debugfs_create_file("vrr_range", S_IRUGO, root, connector,
 			    &vrr_range_fops);
 
+	/* max bpc */
+	debugfs_create_file("output_bpc", 0444, root, connector,
+			    &output_bpc_fops);
+
 	if (connector->funcs->debugfs_init)
 		connector->funcs->debugfs_init(connector, root);
 }
-- 
2.35.1