[Intel-gfx] [PATCH 10/10] drm/i915: Stop loading linear degammma LUT on glk needlessly

[Ville Syrjala <ville.syrjala@linux.intel.com>]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Make glk_load_luts() a bit lighter for the common case
where neither the degamma LUT nor pipe CSC are enabled
by not loading the linear degamma LUT. Making .load_luts()
as lightweight as possible is a good idea since it may need
to execute from a vblank worker under tight deadlines.

My earlier reasoning for always loading the linear degamma LUT
was to avoid an extra LUT load when just enabling/disabling the
pipe CSC, but that is nonsense since we load the LUTs on every
flagged color manaement change/modeset anyway (either of which
is needed for a pipe CSC toggle).

We can also get rid of the glk_can_preload_luts() special
case since the presence of the degamma LUT will now always
match csc_enable.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_color.c | 26 +++-------------------
 1 file changed, 3 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_color.c b/drivers/gpu/drm/i915/display/intel_color.c
index de530bf1aba1..a3066d942f58 100644
--- a/drivers/gpu/drm/i915/display/intel_color.c
+++ b/drivers/gpu/drm/i915/display/intel_color.c
@@ -1198,24 +1198,6 @@ static bool chv_can_preload_luts(const struct intel_crtc_state *new_crtc_state)
 	return !old_crtc_state->post_csc_lut;
 }
 
-static bool glk_can_preload_luts(const struct intel_crtc_state *new_crtc_state)
-{
-	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
-	struct intel_atomic_state *state =
-		to_intel_atomic_state(new_crtc_state->uapi.state);
-	const struct intel_crtc_state *old_crtc_state =
-		intel_atomic_get_old_crtc_state(state, crtc);
-
-	/*
-	 * The hardware degamma is active whenever the pipe
-	 * CSC is active. Thus even if the old state has no
-	 * software degamma we need to avoid clobbering the
-	 * linear hardware degamma mid scanout.
-	 */
-	return !old_crtc_state->csc_enable &&
-		!old_crtc_state->post_csc_lut;
-}
-
 int intel_color_check(struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
@@ -1622,11 +1604,9 @@ static void glk_assign_luts(struct intel_crtc_state *crtc_state)
 	 * On GLK+ both pipe CSC and degamma LUT are controlled
 	 * by csc_enable. Hence for the cases where the CSC is
 	 * needed but degamma LUT is not we need to load a
-	 * linear degamma LUT. In fact we'll just always load
-	 * the degama LUT so that we don't have to reload
-	 * it every time the pipe CSC is being enabled.
+	 * linear degamma LUT.
 	 */
-	if (!crtc_state->pre_csc_lut)
+	if (crtc_state->csc_enable && !crtc_state->pre_csc_lut)
 		drm_property_replace_blob(&crtc_state->pre_csc_lut,
 					  i915->display.color.glk_linear_degamma_lut);
 }
@@ -1667,7 +1647,7 @@ static int glk_color_check(struct intel_crtc_state *crtc_state)
 
 	glk_assign_luts(crtc_state);
 
-	crtc_state->preload_luts = glk_can_preload_luts(crtc_state);
+	crtc_state->preload_luts = intel_can_preload_luts(crtc_state);
 
 	return 0;
 }
-- 
2.35.1