[Intel-gfx] [PATCH v5 13/16] drm/i915/perf: Save/restore EU flex counters across reset

[Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>]

If a drm client is killed, then hw contexts used by the client are reset
immediately. This reset clears the EU flex counter configuration. If an
OA use case is running in parallel, it would start seeing zeroed eu
counter values following the reset even if the drm client is restarted.
Save/restore the EU flex counter config so that the EU counters can be
monitored continuously across resets.

v2:
- Save/restore eu flex config only for gen12, as for pre-gen12, these
  are saved and restored in the context image.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
---
 drivers/gpu/drm/i915/gt/uc/intel_guc_ads.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_ads.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_ads.c
index 34ef4f36e660..a419d60166c8 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_ads.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_ads.c
@@ -392,6 +392,16 @@ static int guc_mmio_regset_init(struct temp_regset *regset,
 		else
 			ret |= GUC_MMIO_REG_ADD(gt, regset, GEN9_LNCFCMOCS(i), false);
 
+	if (GRAPHICS_VER(engine->i915) >= 12) {
+		ret |= GUC_MMIO_REG_ADD(gt, regset, EU_PERF_CNTL0, false);
+		ret |= GUC_MMIO_REG_ADD(gt, regset, EU_PERF_CNTL1, false);
+		ret |= GUC_MMIO_REG_ADD(gt, regset, EU_PERF_CNTL2, false);
+		ret |= GUC_MMIO_REG_ADD(gt, regset, EU_PERF_CNTL3, false);
+		ret |= GUC_MMIO_REG_ADD(gt, regset, EU_PERF_CNTL4, false);
+		ret |= GUC_MMIO_REG_ADD(gt, regset, EU_PERF_CNTL5, false);
+		ret |= GUC_MMIO_REG_ADD(gt, regset, EU_PERF_CNTL6, false);
+	}
+
 	return ret ? -1 : 0;
 }
 
-- 
2.25.1