Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Karol Herbst <kherbst@redhat.com>,
	dri-devel@lists.freedesktop.org, stable@vger.kernel.org,
	Ben Skeggs <bskeggs@redhat.com>, Wayne Lin <Wayne.Lin@amd.com>,
	Alex Deucher <alexander.deucher@amd.com>,
	Harry Wentland <harry.wentland@amd.com>
Subject: [Intel-gfx] [PATCH v2 02/17] drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload()
Date: Tue, 31 Jan 2023 17:05:33 +0200	[thread overview]
Message-ID: <20230131150548.1614458-3-imre.deak@intel.com> (raw)
In-Reply-To: <20230131150548.1614458-1-imre.deak@intel.com>

Atm, drm_dp_remove_payload() uses the same payload state to both get the
vc_start_slot required for the payload removal DPCD message and to
deduct time_slots from vc_start_slot of all payloads after the one being
removed.

The above isn't always correct, as vc_start_slot must be the up-to-date
version contained in the new payload state, but time_slots must be the
one used when the payload was previously added, contained in the old
payload state. The new payload's time_slots can change vs. the old one
if the current atomic commit changes the corresponding mode.

This patch let's drivers pass the old and new payload states to
drm_dp_remove_payload(), but keeps these the same for now in all drivers
not to change the behavior. A follow-up i915 patch will pass in that
driver the correct old and new states to the function.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c |  2 +-
 drivers/gpu/drm/display/drm_dp_mst_topology.c | 26 ++++++++++---------
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |  4 ++-
 drivers/gpu/drm/nouveau/dispnv50/disp.c       |  2 +-
 include/drm/display/drm_dp_mst_helper.h       |  3 ++-
 5 files changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
index a50319fc42b11..180d3893b68da 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -208,7 +208,7 @@ bool dm_helpers_dp_mst_write_payload_allocation_table(
 	if (enable)
 		drm_dp_add_payload_part1(mst_mgr, mst_state, payload);
 	else
-		drm_dp_remove_payload(mst_mgr, mst_state, payload);
+		drm_dp_remove_payload(mst_mgr, mst_state, payload, payload);
 
 	/* mst_mgr->->payloads are VC payload notify MST branch using DPCD or
 	 * AUX message. The sequence is slot 1-63 allocated sequence for each
diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c
index 847c10aa2098c..1990ff5dc7ddd 100644
--- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
@@ -3342,7 +3342,8 @@ EXPORT_SYMBOL(drm_dp_add_payload_part1);
  * drm_dp_remove_payload() - Remove an MST payload
  * @mgr: Manager to use.
  * @mst_state: The MST atomic state
- * @payload: The payload to write
+ * @old_payload: The payload with its old state
+ * @new_payload: The payload to write
  *
  * Removes a payload from an MST topology if it was successfully assigned a start slot. Also updates
  * the starting time slots of all other payloads which would have been shifted towards the start of
@@ -3350,36 +3351,37 @@ EXPORT_SYMBOL(drm_dp_add_payload_part1);
  */
 void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
 			   struct drm_dp_mst_topology_state *mst_state,
-			   struct drm_dp_mst_atomic_payload *payload)
+			   const struct drm_dp_mst_atomic_payload *old_payload,
+			   struct drm_dp_mst_atomic_payload *new_payload)
 {
 	struct drm_dp_mst_atomic_payload *pos;
 	bool send_remove = false;
 
 	/* We failed to make the payload, so nothing to do */
-	if (payload->vc_start_slot == -1)
+	if (new_payload->vc_start_slot == -1)
 		return;
 
 	mutex_lock(&mgr->lock);
-	send_remove = drm_dp_mst_port_downstream_of_branch(payload->port, mgr->mst_primary);
+	send_remove = drm_dp_mst_port_downstream_of_branch(new_payload->port, mgr->mst_primary);
 	mutex_unlock(&mgr->lock);
 
 	if (send_remove)
-		drm_dp_destroy_payload_step1(mgr, mst_state, payload);
+		drm_dp_destroy_payload_step1(mgr, mst_state, new_payload);
 	else
 		drm_dbg_kms(mgr->dev, "Payload for VCPI %d not in topology, not sending remove\n",
-			    payload->vcpi);
+			    new_payload->vcpi);
 
 	list_for_each_entry(pos, &mst_state->payloads, next) {
-		if (pos != payload && pos->vc_start_slot > payload->vc_start_slot)
-			pos->vc_start_slot -= payload->time_slots;
+		if (pos != new_payload && pos->vc_start_slot > new_payload->vc_start_slot)
+			pos->vc_start_slot -= old_payload->time_slots;
 	}
-	payload->vc_start_slot = -1;
+	new_payload->vc_start_slot = -1;
 
 	mgr->payload_count--;
-	mgr->next_start_slot -= payload->time_slots;
+	mgr->next_start_slot -= old_payload->time_slots;
 
-	if (payload->delete)
-		drm_dp_mst_put_port_malloc(payload->port);
+	if (new_payload->delete)
+		drm_dp_mst_put_port_malloc(new_payload->port);
 }
 EXPORT_SYMBOL(drm_dp_remove_payload);
 
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index f3cb12dcfe0a7..dc4e5ff1dbb31 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -526,6 +526,8 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
 		to_intel_connector(old_conn_state->connector);
 	struct drm_dp_mst_topology_state *mst_state =
 		drm_atomic_get_mst_topology_state(&state->base, &intel_dp->mst_mgr);
+	struct drm_dp_mst_atomic_payload *payload =
+		drm_atomic_get_mst_payload_state(mst_state, connector->port);
 	struct drm_i915_private *i915 = to_i915(connector->base.dev);
 
 	drm_dbg_kms(&i915->drm, "active links %d\n",
@@ -534,7 +536,7 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
 	intel_hdcp_disable(intel_mst->connector);
 
 	drm_dp_remove_payload(&intel_dp->mst_mgr, mst_state,
-			      drm_atomic_get_mst_payload_state(mst_state, connector->port));
+			      payload, payload);
 
 	intel_audio_codec_disable(encoder, old_crtc_state, old_conn_state);
 }
diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c
index edcb2529b4025..ed9d374147b8d 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -885,7 +885,7 @@ nv50_msto_prepare(struct drm_atomic_state *state,
 
 	// TODO: Figure out if we want to do a better job of handling VCPI allocation failures here?
 	if (msto->disabled) {
-		drm_dp_remove_payload(mgr, mst_state, payload);
+		drm_dp_remove_payload(mgr, mst_state, payload, payload);
 
 		nvif_outp_dp_mst_vcpi(&mstm->outp->outp, msto->head->base.index, 0, 0, 0, 0);
 	} else {
diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h
index 41fd8352ab656..f5eb9aa152b14 100644
--- a/include/drm/display/drm_dp_mst_helper.h
+++ b/include/drm/display/drm_dp_mst_helper.h
@@ -841,7 +841,8 @@ int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr,
 			     struct drm_dp_mst_atomic_payload *payload);
 void drm_dp_remove_payload(struct drm_dp_mst_topology_mgr *mgr,
 			   struct drm_dp_mst_topology_state *mst_state,
-			   struct drm_dp_mst_atomic_payload *payload);
+			   const struct drm_dp_mst_atomic_payload *old_payload,
+			   struct drm_dp_mst_atomic_payload *new_payload);
 
 int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr);
 
-- 
2.37.1


  parent reply	other threads:[~2023-01-31 15:06 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-31 15:05 [Intel-gfx] [PATCH v2 00/17] drm/i915: drm/i915/dp_mst: Fix MST payload removal during output disabling Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 01/17] drm/i915/dp_mst: Add the MST topology state for modesetted CRTCs Imre Deak
2023-01-31 15:05 ` Imre Deak [this message]
2023-01-31 23:13   ` [Intel-gfx] [PATCH v2 02/17] drm/display/dp_mst: Handle old/new payload states in drm_dp_remove_payload() Lyude Paul
2023-02-01 15:04     ` Imre Deak
2023-02-07  0:42       ` Lyude Paul
2023-02-07 12:11         ` Imre Deak
2023-02-08  0:21           ` Lyude Paul
2023-02-08  7:41             ` Imre Deak
2023-02-09 21:43               ` Lyude Paul
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 03/17] drm/display/dp_mst: Add drm_atomic_get_old_mst_topology_state() Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 04/17] drm/i915/dp_mst: Fix payload removal during output disabling Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 05/17] drm/display/dp_mst: Fix the payload VCPI check in drm_dp_mst_dump_topology() Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 06/17] drm/display/dp_mst: Sanitize payload iteration " Imre Deak
2023-01-31 23:14   ` Lyude Paul
2023-02-03 12:22   ` Ville Syrjälä
2023-02-03 13:12     ` Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 07/17] drm/i915: Factor out helpers for modesetting CRTCs and connectors Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 08/17] drm/i915/dp_mst: Move getting the MST topology state earlier to connector check Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 09/17] drm/display/dp_mst: Add a helper to verify the MST payload state Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 10/17] drm/i915/dp_mst: Verify the MST state of modesetted outputs Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 11/17] drm/display/dp_mst: Add helpers to query for payload allocation errors Imre Deak
2023-02-02 12:15   ` Dan Carpenter
2023-02-02 12:35     ` Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 12/17] drm/display/dp_mst: Add helpers to query payload allocation properties Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 13/17] drm/display/dp_mst: Export the DP_PAYLOAD_TABLE_SIZE definition Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 14/17] drm/display/dp_mst: Factor out a helper to reset the payload table Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 15/17] drm/dp: Add a quirk for a DELL P2715Q MST payload allocation problem Imre Deak
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 16/17] drm/i915/dp_mst: Add workaround for a DELL P2715Q " Imre Deak
2023-01-31 22:47   ` Lyude Paul
2023-02-01 14:41     ` Imre Deak
2023-01-31 23:43   ` Lyude Paul
2023-01-31 15:05 ` [Intel-gfx] [PATCH v2 17/17] drm/i915/dp_mst: Verify the HW state of MST encoders Imre Deak
2023-02-01  9:41   ` Jani Nikula
2023-02-01 14:03     ` Imre Deak
2023-01-31 15:27 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: drm/i915/dp_mst: Fix MST payload removal during output disabling Patchwork
2023-01-31 15:59 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-01-31 20:42 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230131150548.1614458-3-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=Wayne.Lin@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=bskeggs@redhat.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=harry.wentland@amd.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=kherbst@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox