From: Ashutosh Dixit <ashutosh.dixit@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org, Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [Intel-gfx] [PATCH] drm/i915/guc: Disable PL1 power limit when loading GuC firmware
Date: Fri, 10 Mar 2023 16:33:58 -0800 [thread overview]
Message-ID: <20230311003358.1660191-1-ashutosh.dixit@intel.com> (raw)
On dGfx, the PL1 power limit being enabled and set to a low value results
in a low GPU operating freq. It also negates the freq raise operation which
is done before GuC firmware load. As a result GuC firmware load can time
out. Such timeouts were seen in the GL #8062 bug below (where the PL1 power
limit was enabled and set to a low value). Therefore disable the PL1 power
limit when possible when loading GuC firmware.
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
---
drivers/gpu/drm/i915/gt/uc/intel_uc.c | 9 ++++++-
drivers/gpu/drm/i915/i915_hwmon.c | 34 +++++++++++++++++++++++++--
drivers/gpu/drm/i915/i915_hwmon.h | 7 ++++++
3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc.c b/drivers/gpu/drm/i915/gt/uc/intel_uc.c
index 1b7ecd384a79..8794d54500d7 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_uc.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_uc.c
@@ -18,6 +18,7 @@
#include "intel_uc.h"
#include "i915_drv.h"
+#include "i915_hwmon.h"
static const struct intel_uc_ops uc_ops_off;
static const struct intel_uc_ops uc_ops_on;
@@ -460,7 +461,7 @@ static int __uc_init_hw(struct intel_uc *uc)
struct drm_i915_private *i915 = gt->i915;
struct intel_guc *guc = &uc->guc;
struct intel_huc *huc = &uc->huc;
- int ret, attempts;
+ int ret, attempts, pl1en;
GEM_BUG_ON(!intel_uc_supports_guc(uc));
GEM_BUG_ON(!intel_uc_wants_guc(uc));
@@ -491,6 +492,9 @@ static int __uc_init_hw(struct intel_uc *uc)
else
attempts = 1;
+ /* Disable PL1 limit before raising freq when possible */
+ hwm_power_max_disable(gt, &pl1en);
+
intel_rps_raise_unslice(&uc_to_gt(uc)->rps);
while (attempts--) {
@@ -544,6 +548,9 @@ static int __uc_init_hw(struct intel_uc *uc)
intel_rps_lower_unslice(&uc_to_gt(uc)->rps);
}
+ /* Restore PL1 limit */
+ hwm_power_max_restore(gt, pl1en);
+
guc_info(guc, "submission %s\n", str_enabled_disabled(intel_uc_uses_guc_submission(uc)));
guc_info(guc, "SLPC %s\n", str_enabled_disabled(intel_uc_uses_guc_slpc(uc)));
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index ee63a8fd88fc..4ce3da7b7adc 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -62,20 +62,23 @@ struct i915_hwmon {
int scl_shift_time;
};
-static void
+static u32
hwm_locked_with_pm_intel_uncore_rmw(struct hwm_drvdata *ddat,
i915_reg_t reg, u32 clear, u32 set)
{
struct i915_hwmon *hwmon = ddat->hwmon;
struct intel_uncore *uncore = ddat->uncore;
intel_wakeref_t wakeref;
+ u32 old;
mutex_lock(&hwmon->hwmon_lock);
with_intel_runtime_pm(uncore->rpm, wakeref)
- intel_uncore_rmw(uncore, reg, clear, set);
+ old = intel_uncore_rmw(uncore, reg, clear, set);
mutex_unlock(&hwmon->hwmon_lock);
+
+ return old;
}
/*
@@ -444,6 +447,33 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
}
}
+void hwm_power_max_disable(struct intel_gt *gt, u32 *old)
+{
+ struct i915_hwmon *hwmon = gt->i915->hwmon;
+ u32 r;
+
+ if (!hwmon || !i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit))
+ return;
+
+ r = hwm_locked_with_pm_intel_uncore_rmw(&hwmon->ddat,
+ hwmon->rg.pkg_rapl_limit,
+ PKG_PWR_LIM_1_EN, 0);
+ *old = !!(r & PKG_PWR_LIM_1_EN);
+}
+
+void hwm_power_max_restore(struct intel_gt *gt, u32 old)
+{
+ struct i915_hwmon *hwmon = gt->i915->hwmon;
+
+ if (!hwmon || !i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit))
+ return;
+
+ hwm_locked_with_pm_intel_uncore_rmw(&hwmon->ddat,
+ hwmon->rg.pkg_rapl_limit,
+ PKG_PWR_LIM_1_EN,
+ old ? PKG_PWR_LIM_1_EN : 0);
+}
+
static umode_t
hwm_energy_is_visible(const struct hwm_drvdata *ddat, u32 attr)
{
diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
index 7ca9cf2c34c9..0c2db11be2e2 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.h
+++ b/drivers/gpu/drm/i915/i915_hwmon.h
@@ -7,14 +7,21 @@
#ifndef __I915_HWMON_H__
#define __I915_HWMON_H__
+#include <linux/types.h>
+
struct drm_i915_private;
+struct intel_gt;
#if IS_REACHABLE(CONFIG_HWMON)
void i915_hwmon_register(struct drm_i915_private *i915);
void i915_hwmon_unregister(struct drm_i915_private *i915);
+void hwm_power_max_disable(struct intel_gt *gt, u32 *old);
+void hwm_power_max_restore(struct intel_gt *gt, u32 old);
#else
static inline void i915_hwmon_register(struct drm_i915_private *i915) { };
static inline void i915_hwmon_unregister(struct drm_i915_private *i915) { };
+void hwm_power_max_disable(struct intel_gt *gt, u32 *old) { };
+void hwm_power_max_restore(struct intel_gt *gt, u32 old) { };
#endif
#endif /* __I915_HWMON_H__ */
--
2.38.0
next reply other threads:[~2023-03-11 0:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-11 0:33 Ashutosh Dixit [this message]
2023-03-11 20:46 ` [Intel-gfx] [PATCH] drm/i915/guc: Disable PL1 power limit when loading GuC firmware Dixit, Ashutosh
-- strict thread matches above, loose matches on Subject: below --
2023-03-16 3:59 Ashutosh Dixit
2023-03-24 18:15 ` Belgaumkar, Vinay
2023-03-24 23:31 ` Dixit, Ashutosh
2023-03-25 0:06 ` Belgaumkar, Vinay
2023-03-27 16:57 ` Dixit, Ashutosh
2023-03-26 11:52 ` Rodrigo Vivi
2023-03-27 16:58 ` Dixit, Ashutosh
2023-03-27 17:47 ` Rodrigo Vivi
2023-03-28 9:14 ` Tvrtko Ursulin
2023-04-06 4:52 ` Dixit, Ashutosh
2023-04-06 4:50 ` Dixit, Ashutosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230311003358.1660191-1-ashutosh.dixit@intel.com \
--to=ashutosh.dixit@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox