[Intel-gfx] [PATCH] drm/i915/hwmon: Use 0 to designate disabled PL1 power limit

[Ashutosh Dixit <ashutosh.dixit@intel.com>]

On ATSM the PL1 limit is disabled at power up. The previous uapi assumed
that the PL1 limit is always enabled and therefore did not have a notion of
a disabled PL1 limit. This results in erroneous PL1 limit values when the
PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit
was previously shown as 0 which means a low PL1 limit whereas the limit
being disabled actually implies a high effective PL1 limit value.

To get round this problem, the PL1 limit uapi is expanded to include a
special value 0 to designate a disabled PL1 limit.

Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/8062
Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/8060
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |  3 ++-
 drivers/gpu/drm/i915/i915_hwmon.c             | 24 +++++++++++++++++++
 2 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 2d6a472eef885..96fec0bb74c2c 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -14,7 +14,8 @@ Description:	RW. Card reactive sustained  (PL1/Tau) power limit in microwatts.
 
 		The power controller will throttle the operating frequency
 		if the power averaged over a window (typically seconds)
-		exceeds this limit.
+		exceeds this limit. A read value of 0 means that the PL1 power
+		limit is disabled. Writing 0 disables the limit if possible.
 
 		Only supported for particular Intel i915 graphics platforms.
 
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 596dd2c070106..c099057888914 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -349,6 +349,8 @@ hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 	}
 }
 
+#define PL1_DISABLE 0
+
 /*
  * HW allows arbitrary PL1 limits to be set but silently clamps these values to
  * "typical but not guaranteed" min/max values in rg.pkg_power_sku. Follow the
@@ -362,6 +364,14 @@ hwm_power_max_read(struct hwm_drvdata *ddat, long *val)
 	intel_wakeref_t wakeref;
 	u64 r, min, max;
 
+	/* Check if PL1 limit is disabled */
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+	if (!(r & PKG_PWR_LIM_1_EN)) {
+		*val = PL1_DISABLE;
+		return 0;
+	}
+
 	*val = hwm_field_read_and_scale(ddat,
 					hwmon->rg.pkg_rapl_limit,
 					PKG_PWR_LIM_1,
@@ -385,8 +395,22 @@ static int
 hwm_power_max_write(struct hwm_drvdata *ddat, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
 	u32 nval;
 
+	if (val == PL1_DISABLE) {
+		/* Disable PL1 limit */
+		hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+						    PKG_PWR_LIM_1_EN, 0);
+
+		/* Verify, because PL1 limit cannot be disabled on all platforms */
+		with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+			nval = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+		if (nval & PKG_PWR_LIM_1_EN)
+			return -EPERM;
+		return 0;
+	}
+
 	/* Computation in 64-bits to avoid overflow. Round to nearest. */
 	nval = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_power, SF_POWER);
 	nval = PKG_PWR_LIM_1_EN | REG_FIELD_PREP(PKG_PWR_LIM_1, nval);
-- 
2.38.0