From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: [Intel-gfx] [PATCH v2 1/7] drm/i915: Define bitmasks for ilk pfit window pos/size
Date: Wed, 26 Apr 2023 16:50:13 +0300 [thread overview]
Message-ID: <20230426135019.7603-2-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20230426135019.7603-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Define and use the bitmasks for the x/y components
of the ilk+ panel filter window pos/size registers.
Note that we stick to the full 16 bit mask even though
the actual hardware limits are lower (and somewhat
platform dependent). BDW is actually limited to
13 bits horizontal and 12 bits vertical, with the high
bits being hardwired to zero. HSW should have the same
limits as BDW. And pre-HSW should be limited to 12bits
in both directions as that's already the limit of the
transcoder timing registers. Curiously on HSW and earlier
platforms all 16 bits can actually be set, but presumably
the hardware ignores the high bits.
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 12 ++++++++----
drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++
2 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index bf391a6cd8d6..5e40a0ef3457 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -812,8 +812,10 @@ static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state)
else
intel_de_write_fw(dev_priv, PF_CTL(pipe), PF_ENABLE |
PF_FILTER_MED_3x3);
- intel_de_write_fw(dev_priv, PF_WIN_POS(pipe), x << 16 | y);
- intel_de_write_fw(dev_priv, PF_WIN_SZ(pipe), width << 16 | height);
+ intel_de_write_fw(dev_priv, PF_WIN_POS(pipe),
+ PF_WIN_XPOS(x) | PF_WIN_YPOS(y));
+ intel_de_write_fw(dev_priv, PF_WIN_SZ(pipe),
+ PF_WIN_XSIZE(width) | PF_WIN_YSIZE(height));
}
static void intel_crtc_dpms_overlay_disable(struct intel_crtc *crtc)
@@ -3246,8 +3248,10 @@ static void ilk_get_pfit_config(struct intel_crtc_state *crtc_state)
size = intel_de_read(dev_priv, PF_WIN_SZ(crtc->pipe));
drm_rect_init(&crtc_state->pch_pfit.dst,
- pos >> 16, pos & 0xffff,
- size >> 16, size & 0xffff);
+ REG_FIELD_GET(PF_WIN_XPOS_MASK, pos),
+ REG_FIELD_GET(PF_WIN_YPOS_MASK, pos),
+ REG_FIELD_GET(PF_WIN_XSIZE_MASK, size),
+ REG_FIELD_GET(PF_WIN_YSIZE_MASK, size));
/*
* We currently do not free assignements of panel fitters on
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index dde6e91055bd..f7294a9b5cfa 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4025,8 +4025,16 @@
#define PF_FILTER_EDGE_SOFTEN REG_FIELD_PREP(PF_FILTER_EDGE_MASK, 3)
#define _PFA_WIN_SZ 0x68074
#define _PFB_WIN_SZ 0x68874
+#define PF_WIN_XSIZE_MASK REG_GENMASK(31, 16)
+#define PF_WIN_XSIZE(w) REG_FIELD_PREP(PF_WIN_XSIZE_MASK, (w))
+#define PF_WIN_YSIZE_MASK REG_GENMASK(15, 0)
+#define PF_WIN_YSIZE(h) REG_FIELD_PREP(PF_WIN_YSIZE_MASK, (h))
#define _PFA_WIN_POS 0x68070
#define _PFB_WIN_POS 0x68870
+#define PF_WIN_XPOS_MASK REG_GENMASK(31, 16)
+#define PF_WIN_XPOS(x) REG_FIELD_PREP(PF_WIN_XPOS_MASK, (x))
+#define PF_WIN_YPOS_MASK REG_GENMASK(15, 0)
+#define PF_WIN_YPOS(y) REG_FIELD_PREP(PF_WIN_YPOS_MASK, (y))
#define _PFA_VSCALE 0x68084
#define _PFB_VSCALE 0x68884
#define _PFA_HSCALE 0x68090
--
2.39.2
next prev parent reply other threads:[~2023-04-26 13:50 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-26 13:50 [Intel-gfx] [PATCH v2 0/7] drm/i915: Scaler/pfit stuff Ville Syrjala
2023-04-26 13:50 ` Ville Syrjala [this message]
2023-05-03 8:21 ` [Intel-gfx] [PATCH v2 1/7] drm/i915: Define bitmasks for ilk pfit window pos/size Jani Nikula
2023-04-26 13:50 ` [Intel-gfx] [PATCH v2 2/7] drm/i915: Remove dead scaler register defines Ville Syrjala
2023-04-26 13:50 ` [Intel-gfx] [PATCH v2 3/7] drm/i915: Rename skl+ scaler binding bits Ville Syrjala
2023-04-26 13:50 ` [Intel-gfx] [PATCH v2 4/7] drm/i915: s/PS_COEE_INDEX_AUTO_INC/PS_COEF_INDEX_AUTO_INC/ Ville Syrjala
2023-04-26 13:50 ` [Intel-gfx] [PATCH v2 5/7] drm/i915: Define bitmasks for skl+ scaler window pos/size Ville Syrjala
2023-05-03 8:22 ` Jani Nikula
2023-04-26 13:50 ` [Intel-gfx] [PATCH v2 6/7] drm/i915: Use REG_BIT() & co. for pipe scaler registers Ville Syrjala
2023-04-26 13:50 ` [Intel-gfx] [PATCH v2 7/7] drm/i915: Define more PS_CTRL bits Ville Syrjala
2023-05-11 7:29 ` Luca Coelho
2023-05-11 11:54 ` Ville Syrjälä
2023-05-11 12:54 ` Luca Coelho
2023-04-26 14:38 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Scaler/pfit stuff (rev3) Patchwork
2023-04-26 14:45 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-04-26 16:36 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230426135019.7603-2-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox