From: Matt Roper <matthew.d.roper@intel.com>
To: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <intel-xe@lists.freedesktop.org>,
<intel-gfx@lists.freedesktop.org>, <jani.nikula@intel.com>
Subject: Re: [PATCH] drm/i915/hdcp: Handle HDCP Line Rekeying for HDCP 1.4
Date: Thu, 7 Nov 2024 13:44:19 -0800 [thread overview]
Message-ID: <20241107214419.GS4891@mdroper-desk1.amr.corp.intel.com> (raw)
In-Reply-To: <20241107022807.869744-1-suraj.kandpal@intel.com>
On Thu, Nov 07, 2024 at 07:58:08AM +0530, Suraj Kandpal wrote:
> TRANS_DDI_FUNC_CTL asks us to disable hdcp line rekeying when not in
> hdcp 2.2 and we are not using an hdmi transcoder and it need to be
> enabled when we are using an HDMI transcoder to enable HDCP 1.4.
> We use intel_de_rmw cycles to update TRANS_DDI_FUNC_CTL register so
> we cannot depend on the value being 0 by default everytime which calls
> for seprate handling of HDCP 1.4 case.
>
> --v2
> -Use the exising function and modify it based on a bool rather than
> have a different function [Matt]
>
> --v3
> -No need for kzalloc [Jani]
>
> --v4
> -i915_reg_t should not be pointer [Jani]
> -use rekey_bit to ensure when writing to reg everything is initialized
>
> Bspec: 69964, 50493, 50054
> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_hdcp.c | 37 ++++++++++++++---------
> 1 file changed, 22 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
> index 4e937fbba4d2..dbcdd1777fa3 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> @@ -32,27 +32,32 @@
> #define HDCP2_LC_RETRY_CNT 3
>
> static void
> -intel_hdcp_disable_hdcp_line_rekeying(struct intel_encoder *encoder,
> - struct intel_hdcp *hdcp)
> +intel_hdcp_adjust_hdcp_line_rekeying(struct intel_encoder *encoder,
> + struct intel_hdcp *hdcp,
> + bool enable)
> {
> struct intel_display *display = to_intel_display(encoder);
> + i915_reg_t rekey_reg;
> + u32 rekey_bit = 0;
>
> /* Here we assume HDMI is in TMDS mode of operation */
> if (encoder->type != INTEL_OUTPUT_HDMI)
> return;
>
> - if (DISPLAY_VER(display) >= 30)
> - intel_de_rmw(display,
> - TRANS_DDI_FUNC_CTL(display, hdcp->cpu_transcoder),
> - 0, XE3_TRANS_DDI_HDCP_LINE_REKEY_DISABLE);
> - else if (IS_DISPLAY_VERx100_STEP(display, 1401, STEP_B0, STEP_FOREVER) ||
> - IS_DISPLAY_VERx100_STEP(display, 2000, STEP_B0, STEP_FOREVER))
> - intel_de_rmw(display,
> - TRANS_DDI_FUNC_CTL(display, hdcp->cpu_transcoder),
> - 0, TRANS_DDI_HDCP_LINE_REKEY_DISABLE);
> - else if (IS_DISPLAY_VERx100_STEP(display, 1400, STEP_D0, STEP_FOREVER))
> - intel_de_rmw(display, MTL_CHICKEN_TRANS(hdcp->cpu_transcoder),
> - 0, HDCP_LINE_REKEY_DISABLE);
> + if (DISPLAY_VER(display) >= 30) {
> + rekey_reg = TRANS_DDI_FUNC_CTL(display, hdcp->cpu_transcoder);
> + rekey_bit = XE3_TRANS_DDI_HDCP_LINE_REKEY_DISABLE;
> + } else if (IS_DISPLAY_VERx100_STEP(display, 1401, STEP_B0, STEP_FOREVER) ||
> + IS_DISPLAY_VERx100_STEP(display, 2000, STEP_B0, STEP_FOREVER)) {
> + rekey_reg = TRANS_DDI_FUNC_CTL(display, hdcp->cpu_transcoder);
> + rekey_bit = TRANS_DDI_HDCP_LINE_REKEY_DISABLE;
> + } else if (IS_DISPLAY_VERx100_STEP(display, 1400, STEP_D0, STEP_FOREVER)) {
> + rekey_reg = MTL_CHICKEN_TRANS(hdcp->cpu_transcoder);
> + rekey_bit = HDCP_LINE_REKEY_DISABLE;
> + }
> +
> + if (rekey_bit)
> + intel_de_rmw(display, rekey_reg, rekey_bit, enable ? 0 : rekey_bit);
> }
>
> static int intel_conn_to_vcpi(struct intel_atomic_state *state,
> @@ -1049,6 +1054,8 @@ static int intel_hdcp1_enable(struct intel_connector *connector)
> return ret;
> }
>
> + intel_hdcp_adjust_hdcp_line_rekeying(connector->encoder, hdcp, true);
> +
> /* Incase of authentication failures, HDCP spec expects reauth. */
> for (i = 0; i < tries; i++) {
> ret = intel_hdcp_auth(connector);
> @@ -2062,7 +2069,7 @@ static int _intel_hdcp2_enable(struct intel_atomic_state *state,
> connector->base.base.id, connector->base.name,
> hdcp->content_type);
>
> - intel_hdcp_disable_hdcp_line_rekeying(connector->encoder, hdcp);
> + intel_hdcp_adjust_hdcp_line_rekeying(connector->encoder, hdcp, false);
>
> ret = hdcp2_authenticate_and_encrypt(state, connector);
> if (ret) {
> --
> 2.34.1
>
--
Matt Roper
Graphics Software Engineer
Linux GPU Platform Enablement
Intel Corporation
next prev parent reply other threads:[~2024-11-07 21:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 2:28 [PATCH] drm/i915/hdcp: Handle HDCP Line Rekeying for HDCP 1.4 Suraj Kandpal
2024-11-07 3:15 ` ✓ Fi.CI.BAT: success for drm/i915/hdcp: Handle HDCP Line Rekeying for HDCP 1.4 (rev4) Patchwork
2024-11-07 4:48 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-11-07 21:48 ` Matt Roper
2024-11-07 21:44 ` Matt Roper [this message]
-- strict thread matches above, loose matches on Subject: below --
2024-11-06 17:40 [PATCH] drm/i915/hdcp: Handle HDCP Line Rekeying for HDCP 1.4 Suraj Kandpal
2024-11-07 1:54 ` kernel test robot
2024-11-06 12:51 Suraj Kandpal
2024-11-06 16:29 ` Jani Nikula
2024-11-06 16:53 ` Kandpal, Suraj
2024-11-06 9:38 Suraj Kandpal
2024-11-06 10:03 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107214419.GS4891@mdroper-desk1.amr.corp.intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox