Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 4/8] drm/client: Make copies of modes
Date: Fri, 28 Feb 2025 23:14:50 +0200	[thread overview]
Message-ID: <20250228211454.8138-5-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20250228211454.8138-1-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm_client_firmware_config() is currently picking up the current
mode of the crtc via the legacy crtc->mode, which is not supposed
to be used by atomic drivers at all. We can't simply switch over
to the proper crtc->state->mode because we drop the crtc->mutex
(which protects crtc->state) before the mode gets used.

The most straightforward solution to extend the lifetime of
modes[] seem to be to make full copies of the modes.

And with this we can undo also commit 3eadd887dbac
("drm/client:Fully protect modes[] with dev->mode_config.mutex")
as the lifetime of modes[] no longer has anything to do with
that lock.

v2: Don't try to copy NULL modes
v3: Keep storing pointers and use drm_mode_{duplicate,destroy}()

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/drm_client_modeset.c | 62 +++++++++++++++++++++-------
 1 file changed, 47 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index 148257287ae4..ff034359f063 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -265,6 +265,25 @@ static void drm_client_connectors_enabled(struct drm_connector *connectors[],
 		enabled[i] = drm_connector_enabled(connectors[i], false);
 }
 
+static void mode_replace(struct drm_device *dev,
+			 const struct drm_display_mode **dst,
+			 const struct drm_display_mode *src)
+{
+	drm_mode_destroy(dev, (struct drm_display_mode *)*dst);
+
+	*dst = src ? drm_mode_duplicate(dev, src) : NULL;
+}
+
+static void modes_destroy(struct drm_device *dev,
+			  const struct drm_display_mode *modes[],
+			  int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		mode_replace(dev, &modes[i], NULL);
+}
+
 static bool drm_client_target_cloned(struct drm_device *dev,
 				     struct drm_connector *connectors[],
 				     unsigned int connector_count,
@@ -296,7 +315,9 @@ static bool drm_client_target_cloned(struct drm_device *dev,
 	for (i = 0; i < connector_count; i++) {
 		if (!enabled[i])
 			continue;
-		modes[i] = drm_connector_pick_cmdline_mode(connectors[i]);
+
+		mode_replace(dev, &modes[i],
+			     drm_connector_pick_cmdline_mode(connectors[i]));
 		if (!modes[i]) {
 			can_clone = false;
 			break;
@@ -335,7 +356,7 @@ static bool drm_client_target_cloned(struct drm_device *dev,
 					   DRM_MODE_MATCH_CLOCK |
 					   DRM_MODE_MATCH_FLAGS |
 					   DRM_MODE_MATCH_3D_FLAGS))
-				modes[i] = mode;
+				mode_replace(dev, &modes[i], mode);
 		}
 		if (!modes[i])
 			can_clone = false;
@@ -445,16 +466,19 @@ static bool drm_client_target_preferred(struct drm_device *dev,
 		}
 
 		mode_type = "cmdline";
-		modes[i] = drm_connector_pick_cmdline_mode(connector);
+		mode_replace(dev, &modes[i],
+			     drm_connector_pick_cmdline_mode(connector));
 
 		if (!modes[i]) {
 			mode_type = "preferred";
-			modes[i] = drm_connector_preferred_mode(connector, width, height);
+			mode_replace(dev, &modes[i],
+				     drm_connector_preferred_mode(connector, width, height));
 		}
 
 		if (!modes[i]) {
 			mode_type = "first";
-			modes[i] = drm_connector_first_mode(connector);
+			mode_replace(dev, &modes[i],
+				     drm_connector_first_mode(connector));
 		}
 
 		/*
@@ -472,10 +496,12 @@ static bool drm_client_target_preferred(struct drm_device *dev,
 			     connector->tile_v_loc == 0 &&
 			     !drm_connector_get_tiled_mode(connector))) {
 				mode_type = "non tiled";
-				modes[i] = drm_connector_fallback_non_tiled_mode(connector);
+				mode_replace(dev, &modes[i],
+					     drm_connector_fallback_non_tiled_mode(connector));
 			} else {
 				mode_type = "tiled";
-				modes[i] = drm_connector_get_tiled_mode(connector);
+				mode_replace(dev, &modes[i],
+					     drm_connector_get_tiled_mode(connector));
 			}
 		}
 
@@ -690,16 +716,19 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
 		}
 
 		mode_type = "cmdline";
-		modes[i] = drm_connector_pick_cmdline_mode(connector);
+		mode_replace(dev, &modes[i],
+			     drm_connector_pick_cmdline_mode(connector));
 
 		if (!modes[i]) {
 			mode_type = "preferred";
-			modes[i] = drm_connector_preferred_mode(connector, width, height);
+			mode_replace(dev, &modes[i],
+				     drm_connector_preferred_mode(connector, width, height));
 		}
 
 		if (!modes[i]) {
 			mode_type = "first";
-			modes[i] = drm_connector_first_mode(connector);
+			mode_replace(dev, &modes[i],
+				     drm_connector_first_mode(connector));
 		}
 
 		/* last resort: use current mode */
@@ -716,7 +745,8 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
 			 * fastboot check to work correctly.
 			 */
 			mode_type = "current";
-			modes[i] = &connector->state->crtc->mode;
+			mode_replace(dev, &modes[i],
+				     &connector->state->crtc->mode);
 		}
 
 		/*
@@ -726,7 +756,8 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
 		if (connector->has_tile &&
 		    num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
 			mode_type = "non tiled";
-			modes[i] = drm_connector_fallback_non_tiled_mode(connector);
+			mode_replace(dev, &modes[i],
+				     drm_connector_fallback_non_tiled_mode(connector));
 		}
 		crtcs[i] = new_crtc;
 
@@ -798,7 +829,6 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
 	unsigned int total_modes_count = 0;
 	struct drm_client_offset *offsets;
 	unsigned int connector_count = 0;
-	/* points to modes protected by mode_config.mutex */
 	const struct drm_display_mode **modes;
 	struct drm_crtc **crtcs;
 	int i, ret = 0;
@@ -850,7 +880,7 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
 
 	if (!drm_client_firmware_config(client, connectors, connector_count, crtcs,
 					modes, offsets, enabled, width, height)) {
-		memset(modes, 0, connector_count * sizeof(*modes));
+		modes_destroy(dev, modes, connector_count);
 		memset(crtcs, 0, connector_count * sizeof(*crtcs));
 		memset(offsets, 0, connector_count * sizeof(*offsets));
 
@@ -867,6 +897,8 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
 				      crtcs, modes, 0, width, height);
 	}
 
+	mutex_unlock(&dev->mode_config.mutex);
+
 	drm_client_modeset_release(client);
 
 	for (i = 0; i < connector_count; i++) {
@@ -901,11 +933,11 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
 			modeset->y = offset->y;
 		}
 	}
-	mutex_unlock(&dev->mode_config.mutex);
 
 	mutex_unlock(&client->modeset_mutex);
 out:
 	kfree(crtcs);
+	modes_destroy(dev, modes, connector_count);
 	kfree(modes);
 	kfree(offsets);
 	kfree(enabled);
-- 
2.45.3


  parent reply	other threads:[~2025-02-28 21:15 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-28 21:14 [PATCH v2 0/8] drm/client: Stop using legacy crtc->mode and a bunch of cleanups Ville Syrjala
2025-02-28 21:14 ` [PATCH v2 1/8] drm/client: Constify modes Ville Syrjala
2025-03-01  3:28   ` kernel test robot
2025-03-01  4:41   ` kernel test robot
2025-03-03  9:38   ` [PATCH v3 " Ville Syrjala
2025-02-28 21:14 ` [PATCH v2 2/8] drm/client: Use array notation for function arguments Ville Syrjala
2025-02-28 21:14 ` [PATCH v2 3/8] drm/client: Streamline mode selection debugs Ville Syrjala
2025-02-28 21:14 ` Ville Syrjala [this message]
2025-03-12 14:38   ` [PATCH v2 4/8] drm/client: Make copies of modes Jani Nikula
2025-02-28 21:14 ` [PATCH v2 5/8] drm/client: Stop using the legacy crtc->mode Ville Syrjala
2025-03-12 14:44   ` Jani Nikula
2025-02-28 21:14 ` [PATCH v2 6/8] drm/client: s/new_crtc/crtc/ Ville Syrjala
2025-03-12 14:45   ` Jani Nikula
2025-02-28 21:14 ` [PATCH v2 7/8] drm/client: Move variables to tighter scope Ville Syrjala
2025-03-12 14:45   ` Jani Nikula
2025-02-28 21:14 ` [PATCH v2 8/8] drm/client: s/unsigned int i/int i/ Ville Syrjala
2025-03-12 14:45   ` Jani Nikula
2025-02-28 21:35 ` ✗ Fi.CI.CHECKPATCH: warning for drm/client: Stop using legacy crtc->mode and a bunch of cleanups (rev5) Patchwork
2025-02-28 21:56 ` ✓ i915.CI.BAT: success " Patchwork
2025-03-01 10:34 ` ✗ i915.CI.Full: failure " Patchwork
2025-03-03 10:27 ` ✗ Fi.CI.CHECKPATCH: warning for drm/client: Stop using legacy crtc->mode and a bunch of cleanups (rev6) Patchwork
2025-03-03 10:45 ` ✗ i915.CI.BAT: failure " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2024-10-03 11:33 [PATCH 4/8] drm/client: Make copies of modes Ville Syrjala
2024-10-03 18:15 ` [PATCH v2 " Ville Syrjala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250228211454.8138-5-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox