public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Subject: [PATCH 108/108] drm/i915/kunit: DP link: add fallback tests
Date: Tue, 28 Apr 2026 15:52:29 +0300	[thread overview]
Message-ID: <20260428125233.1664668-109-imre.deak@intel.com> (raw)
In-Reply-To: <20260428125233.1664668-1-imre.deak@intel.com>

Add KUnit tests for DP link fallback selection across eDP, SST, and MST.
Verify that the fallback logic properly selects the maximum allowed
configuration, iterates through allowed configurations, and disables
failed configs as expected.

These tests include UHBR vs. non-UHBR conditions, MST vs. SST mode,
and validate that subsequent fallback selections respect the updated
allowed configuration mask.

Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 .../i915/display/tests/intel_dp_link_test.c   | 316 ++++++++++++++++++
 1 file changed, 316 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/tests/intel_dp_link_test.c b/drivers/gpu/drm/i915/display/tests/intel_dp_link_test.c
index 10c4679f31efd..c90281dedb3a0 100644
--- a/drivers/gpu/drm/i915/display/tests/intel_dp_link_test.c
+++ b/drivers/gpu/drm/i915/display/tests/intel_dp_link_test.c
@@ -1022,6 +1022,317 @@ static void intel_dp_link_caps_test_update_params_expand_disable_random(struct k
 		test_update_params_expand_random(test, true);
 }
 
+/*
+ * TEST: Fallback sequence
+ * -----------------------
+ * Verify the eDP fallback logic to set the maximum supported configuration
+ * as a preference.
+ *
+ * For DP SST and MST verify fallback selection from the connector's
+ * maximum configuration and iteration of the resulting allowed
+ * configurations.
+ */
+static void intel_dp_link_test_fallback_for_edp(struct kunit *test)
+{
+	struct test_ctx *ctx = test->priv;
+	struct intel_dp_link_caps *link_caps = ctx->dev.dp.link.caps;
+	struct test_config_table expected_table =
+		INIT_STANDARD_TABLE(test, LINK_TEST_NUM_STANDARD_RATES,
+					  LINK_TEST_MAX_LANE_COUNT);
+	struct intel_digital_port *dig_port = dp_to_dig_port(&ctx->dev.dp);
+	const struct intel_dp_link_training_test_ops *lt_ops =
+		ctx->link_training_ops;
+	const struct intel_dp_link_caps_test_ops *lc_ops =
+		ctx->link_caps_ops;
+	struct intel_dp_link_config min_config = {
+		.rate = expected_table.rates.entries[0],
+		.lane_count = 1,
+	};
+	struct intel_dp_link_config max_config = {
+		.rate = expected_table.rates.entries[expected_table.rates.size - 1],
+		.lane_count = LINK_TEST_MAX_LANE_COUNT,
+	};
+	struct intel_dp_link_config iter_config;
+	int fallback_err;
+
+	dig_port->base.type = INTEL_OUTPUT_EDP;
+	ctx->dev.dp.use_max_params = false;
+
+	update_link_caps_and_verify(&expected_table, link_caps,
+				    INTEL_DP_LINK_CAPS_UPDATE_RESET);
+
+	test_for_each_dp_link_config(ctx,
+				     lc_ops->config_order_for_connector(&ctx->dev.connector),
+				     lc_ops->get_allowed_config_mask(link_caps),
+				     &iter_config)
+		break;
+
+	KUNIT_EXPECT_FALSE(test, ctx->dev.dp.use_max_params);
+	KUNIT_EXPECT_TRUE(test, link_configs_match(&iter_config, &min_config));
+
+	ctx->dev.crtc_state.output_types = BIT(dig_port->base.type);
+	ctx->dev.crtc_state.port_clock = min_config.rate;
+	ctx->dev.crtc_state.lane_count = min_config.lane_count;
+
+	fallback_err = lt_ops->get_fallback_values(&ctx->dev.dp, &ctx->dev.crtc_state);
+	KUNIT_EXPECT_EQ(test, fallback_err, 0);
+
+	/* The fallback should've changed the order. */
+	test_for_each_dp_link_config(ctx,
+				     lc_ops->config_order_for_connector(&ctx->dev.connector),
+				     lc_ops->get_allowed_config_mask(link_caps),
+				     &iter_config)
+		break;
+
+	KUNIT_EXPECT_TRUE(test, ctx->dev.dp.use_max_params);
+	KUNIT_EXPECT_TRUE(test, link_configs_match(&iter_config, &max_config));
+}
+
+static bool test_fallback_from_target(struct test_config_table *expected_table,
+				      enum intel_output_type output_type, int max_rate,
+				      const struct intel_dp_link_config *expected_target_config,
+				      const struct intel_dp_link_config *expected_fallback_config)
+{
+	struct kunit *test = expected_table->test;
+	struct test_ctx *ctx = test->priv;
+	struct intel_dp_link_caps *link_caps = ctx->dev.dp.link.caps;
+	struct intel_dp_link_config iter_config;
+	const struct intel_dp_link_training_test_ops *lt_ops =
+		ctx->link_training_ops;
+	const struct intel_dp_link_caps_test_ops *lc_ops =
+		ctx->link_caps_ops;
+	/* Modify default order direction for max config lookup. */
+	struct intel_dp_link_caps_config_order connector_desc_order = {
+		.key = lc_ops->config_order_for_connector(&ctx->dev.connector).key,
+		.dir = INTEL_DP_LINK_CAPS_CONFIG_ORDER_DIR_DESC,
+	};
+	int expected_fallback_err = 0;
+	int fallback_err;
+
+	/* Get the max connector config, optionally filtered to the max_rate limit. */
+	test_for_each_dp_link_config(ctx, connector_desc_order,
+				     lc_ops->get_allowed_config_mask(link_caps),
+				     &iter_config)
+		if (max_rate == 0 || iter_config.rate <= max_rate)
+			break;
+
+	KUNIT_EXPECT_TRUE(test, link_configs_match(&iter_config,
+						   expected_target_config));
+	KUNIT_EXPECT_FALSE(test, link_configs_match(&iter_config,
+						    &INTEL_DP_LINK_CONFIG_NULL));
+
+	ctx->dev.crtc_state.output_types = BIT(output_type);
+	ctx->dev.crtc_state.port_clock = expected_target_config->rate;
+	ctx->dev.crtc_state.lane_count = expected_target_config->lane_count;
+
+	if (link_configs_match(expected_fallback_config, &INTEL_DP_LINK_CONFIG_NULL))
+		expected_fallback_err = -1;
+
+	fallback_err = lt_ops->get_fallback_values(&ctx->dev.dp, &ctx->dev.crtc_state);
+	KUNIT_EXPECT_EQ(test, fallback_err, expected_fallback_err);
+
+	if (!fallback_err) {
+		/*
+		 * NOTE: This test does not verify any implied fallback
+		 * target selection.
+		 *
+		 * The current driver behavior may still select a fallback
+		 * configuration indirectly via max_limits, but that is an
+		 * implementation artifact rather than part of the intended
+		 * fallback API behavior, and is therefore not verified here.
+		 *
+		 * Instead, the effect of the fallback logic is verified by
+		 * checking that the failed target configuration is disabled.
+		 * Selecting the next target configuration from the remaining
+		 * allowed configurations belongs to the modeset link target
+		 * selection logic.
+		 */
+		add_config(test, &expected_table->disabled_configs,
+			   expected_target_config);
+	}
+
+	verify_link_caps(expected_table, link_caps);
+
+	return !fallback_err;
+}
+
+static const struct link_config_set *
+get_target_configs_for_output_type(struct kunit *test,
+				   enum intel_output_type output_type)
+{
+	switch (output_type) {
+	case INTEL_OUTPUT_DDI:
+	case INTEL_OUTPUT_DP:
+	case INTEL_OUTPUT_EDP:
+		return &standard_dp_link_configs[TEST_CONFIG_ORDER_KEY_RATE_LANE];
+	case INTEL_OUTPUT_DP_MST:
+		return &standard_dp_link_configs[TEST_CONFIG_ORDER_KEY_BW];
+	default:
+		KUNIT_FAIL_AND_ABORT(test, "Missing output type: %d", output_type);
+
+	}
+}
+
+static const struct link_config_set *
+get_fallback_configs_for_output_type(struct kunit *test,
+				     enum intel_output_type output_type)
+{
+	switch (output_type) {
+	case INTEL_OUTPUT_DDI:
+	case INTEL_OUTPUT_DP:
+	case INTEL_OUTPUT_EDP:
+		return &standard_dp_link_configs[TEST_CONFIG_ORDER_KEY_LANE_RATE];
+	case INTEL_OUTPUT_DP_MST:
+		return &standard_dp_link_configs[TEST_CONFIG_ORDER_KEY_BW];
+	default:
+		KUNIT_FAIL_AND_ABORT(test, "Missing output type: %d", output_type);
+
+	}
+}
+
+static bool output_type_allows_uhbr_fallback(enum intel_output_type output_type)
+{
+	return output_type == INTEL_OUTPUT_DP_MST;
+}
+
+static void assert_config_is_supported(const struct test_config_table *expected_table,
+				       const struct intel_dp_link_config *config)
+{
+	struct kunit *test = expected_table->test;
+
+	KUNIT_ASSERT_TRUE(test, has_rate(&expected_table->rates, config->rate));
+	KUNIT_ASSERT_LE(test, config->lane_count, expected_table->max_lane_count);
+}
+
+static bool get_fallback_config(const struct test_config_table *expected_table,
+				enum intel_output_type output_type,
+				const struct intel_dp_link_config *target_config,
+				struct intel_dp_link_config *fallback_config)
+{
+	struct kunit *test = expected_table->test;
+	const struct link_config_set *config_set =
+		get_fallback_configs_for_output_type(test, output_type);
+	int i;
+
+	i = lookup_config(config_set, target_config);
+	KUNIT_ASSERT_GE(test, i, 0);
+
+	for (i--; i >= 0; i--) {
+		const struct intel_dp_link_config *config =
+			&config_set->entries[i];
+
+		if (output_type_allows_uhbr_fallback(output_type) ||
+		    !drm_dp_is_uhbr_rate(target_config->rate) ||
+		    drm_dp_is_uhbr_rate(config->rate)) {
+			assert_config_is_supported(expected_table, config);
+			*fallback_config = *config;
+
+			return true;
+		}
+	}
+
+	return false;
+}
+
+static bool get_target_config(const struct test_config_table *expected_table,
+			      enum intel_output_type output_type,
+			      int max_rate,
+			      struct intel_dp_link_config *target)
+{
+	struct kunit *test = expected_table->test;
+	const struct link_config_set *config_set =
+		get_target_configs_for_output_type(test, output_type);
+	int i;
+
+	for (i = config_set->size - 1; i >= 0; i--) {
+		const struct intel_dp_link_config *config =
+			&config_set->entries[i];
+
+		if (config->rate <= max_rate) {
+			assert_config_is_supported(expected_table, config);
+			*target = *config;
+
+			return true;
+		}
+	}
+
+	return false;
+}
+
+static void test_fallback_seq(struct kunit *test,
+			      enum intel_output_type output_type,
+			      bool uhbr)
+{
+	struct test_ctx *ctx = test->priv;
+	struct intel_dp_link_caps *link_caps = ctx->dev.dp.link.caps;
+	struct test_config_table expected_table =
+		INIT_STANDARD_TABLE(test, LINK_TEST_NUM_STANDARD_RATES,
+					  LINK_TEST_MAX_LANE_COUNT);
+	struct intel_digital_port *dig_port = dp_to_dig_port(&ctx->dev.dp);
+	struct intel_dp_link_config fallback_config = {};
+	struct intel_dp_link_config target_config;
+	int fallback_count = 0;
+	bool target_found;
+	int max_rate;
+
+	if (uhbr)
+		max_rate = expected_table.rates.entries[expected_table.rates.size - 1];
+	else
+		max_rate = 810000;
+
+	dig_port->base.type = output_type;
+	ctx->dev.dp.use_max_params = false;
+
+	update_link_caps_and_verify(&expected_table, link_caps, INTEL_DP_LINK_CAPS_UPDATE_RESET);
+
+	/* Get the initial target config. */
+	target_found = get_target_config(&expected_table, output_type,
+					max_rate, &target_config);
+	KUNIT_ASSERT_TRUE(test, target_found);
+
+	for (;;) {
+		/* Also test the case where no fallback is available. */
+		if (!get_fallback_config(&expected_table, output_type,
+					 &target_config, &fallback_config))
+			fallback_config = INTEL_DP_LINK_CONFIG_NULL;
+
+		if (!test_fallback_from_target(&expected_table, output_type, max_rate,
+					       &target_config, &fallback_config))
+			break;
+
+		/*
+		 * The fallback changed the max rate allowed for the next
+		 * target.
+		 */
+		max_rate = fallback_config.rate;
+
+		/* Simply select the fallback config as the next target. */
+		target_config = fallback_config;
+
+		fallback_count++;
+		KUNIT_ASSERT_LT(test, fallback_count, LINK_TEST_MAX_CONFIGS);
+	}
+}
+
+static void intel_dp_link_test_fallback_for_sst_max_non_uhbr(struct kunit *test)
+{
+	test_fallback_seq(test, INTEL_OUTPUT_DP, false);
+}
+
+static void intel_dp_link_test_fallback_for_sst_max_uhbr(struct kunit *test)
+{
+	test_fallback_seq(test, INTEL_OUTPUT_DP, true);
+}
+
+static void intel_dp_link_test_fallback_for_mst(struct kunit *test)
+{
+	struct test_ctx *ctx = test->priv;
+
+	ctx->dev.connector.mst.dp = &ctx->dev.dp;
+
+	test_fallback_seq(test, INTEL_OUTPUT_DP_MST, true);
+}
+
 static struct kunit_case intel_dp_link_test_cases[] = {
 	KUNIT_CASE(intel_dp_link_caps_test_baseline),
 
@@ -1040,6 +1351,11 @@ static struct kunit_case intel_dp_link_test_cases[] = {
 	KUNIT_CASE(intel_dp_link_caps_test_update_params_expand_random),
 	KUNIT_CASE(intel_dp_link_caps_test_update_params_expand_disable_random),
 
+	KUNIT_CASE(intel_dp_link_test_fallback_for_edp),
+	KUNIT_CASE(intel_dp_link_test_fallback_for_sst_max_non_uhbr),
+	KUNIT_CASE(intel_dp_link_test_fallback_for_sst_max_uhbr),
+	KUNIT_CASE(intel_dp_link_test_fallback_for_mst),
+
 	{}
 };
 
-- 
2.49.1


  parent reply	other threads:[~2026-04-28 12:56 UTC|newest]

Thread overview: 113+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-28 12:50 [PATCH 000/108] drm/i915/dp_link: Refactor DP link capability logic Imre Deak
2026-04-28 12:50 ` [PATCH 001/108] drm/i915/dp: Move clamping max link rate to common rates setup Imre Deak
2026-04-28 12:50 ` [PATCH 002/108] drm/i915/dp: Clamp max lane count to max common lane count Imre Deak
2026-04-28 12:50 ` [PATCH 003/108] drm/i915/dp: Bump connector epoch on link capability changes Imre Deak
2026-04-28 12:50 ` [PATCH 004/108] drm/i915/dp_link_training: Introduce link training state struct Imre Deak
2026-04-28 12:50 ` [PATCH 005/108] drm/i915/dp_link_training: Factor out link training state reset helper Imre Deak
2026-04-28 12:50 ` [PATCH 006/108] drm/i915/dp_link_training: Reset link training state on link capability change Imre Deak
2026-04-28 12:50 ` [PATCH 007/108] drm/i915/dp_link_training: Flush commits in debugfs entries Imre Deak
2026-04-28 12:50 ` [PATCH 008/108] drm/i915/dp_link_training: Move link training helpers to link training code Imre Deak
2026-04-28 12:50 ` [PATCH 009/108] drm/i915/dp_link_training: Use link_training as base pointer in debugfs Imre Deak
2026-04-28 12:50 ` [PATCH 010/108] drm/i915/dp_link_training: Add helpers to access force retrain state Imre Deak
2026-04-28 12:50 ` [PATCH 011/108] drm/i915/dp_link_training: Move link recovery/debug state to link_training Imre Deak
2026-04-28 12:50 ` [PATCH 012/108] drm/i915/dp_link_training: Prevent repeated autoretrain attempts Imre Deak
2026-04-28 12:50 ` [PATCH 013/108] drm/i915/dp_link_training: Clamp sequential link training failure counter Imre Deak
2026-04-28 12:50 ` [PATCH 014/108] drm/i915/dp_link_training: Check for pending autoretrain explicitly Imre Deak
2026-04-28 12:50 ` [PATCH 015/108] drm/i915/dp_link_training: Add helper to query pending autoretrain Imre Deak
2026-04-28 12:50 ` [PATCH 016/108] drm/i915/dp_link_training: Add helper to query allowed autoretrain Imre Deak
2026-04-28 12:50 ` [PATCH 017/108] drm/i915/dp_link_training: Add helper to mark link training failure Imre Deak
2026-04-28 12:50 ` [PATCH 018/108] drm/i915/dp_link_training: Add helper to reset link recovery state Imre Deak
2026-04-28 12:51 ` [PATCH 019/108] drm/i915/dp_link_training: Track link recovery state with an enum Imre Deak
2026-04-28 12:51 ` [PATCH 020/108] drm/i915/dp_link_training: Add no-fallback link recovery state Imre Deak
2026-04-28 12:51 ` [PATCH 021/108] drm/i915/display: Factor out a helper to modeset a pipe with atomic state Imre Deak
2026-04-28 12:51 ` [PATCH 022/108] drm/i915/display: Simplify intel_modeset_commit_pipes_for_atomic_state() Imre Deak
2026-04-28 12:51 ` [PATCH 023/108] drm/i915/dp_link_training: Allocate atomic state for autoretrain modeset Imre Deak
2026-04-28 12:51 ` [PATCH 024/108] drm/i915/dp_link_training: Disallow autoretrains after failed modeset Imre Deak
2026-04-28 12:51 ` [PATCH 025/108] drm/i915/dp_link_training: Fix kernel-doc of intel_dp_init_lttpr_and_dprx_caps() Imre Deak
2026-04-28 12:51 ` [PATCH 026/108] drm/i915/dp_link_training: Document DP link recovery logic Imre Deak
2026-04-28 12:51 ` [PATCH 027/108] drm/i915/dp: Rename intel_dp_link_config to intel_dp_link_config_entry Imre Deak
2026-04-28 12:51 ` [PATCH 028/108] drm/i915/dp: Add struct intel_dp_link_config Imre Deak
2026-04-28 12:51 ` [PATCH 029/108] drm/i915/dp_link_caps: Introduce DP link capability module Imre Deak
2026-04-28 12:51 ` [PATCH 030/108] drm/i915/dp_link_caps: Move common rate helpers to link caps Imre Deak
2026-04-28 12:51 ` [PATCH 031/108] drm/i915/dp_link_caps: Move forced link param " Imre Deak
2026-04-28 12:51 ` [PATCH 032/108] drm/i915/dp: Simplify querying of forced link parameters Imre Deak
2026-04-28 12:51 ` [PATCH 033/108] drm/i915/dp_link_caps: Move forced and max link debugfs entries to link caps Imre Deak
2026-04-28 12:51 ` [PATCH 034/108] drm/i915/dp_link_training: Use helpers to get forced link params Imre Deak
2026-04-28 12:51 ` [PATCH 035/108] drm/i915/dp_link_caps: Move forced link params to link_caps Imre Deak
2026-04-28 12:51 ` [PATCH 036/108] drm/i915/dp_link_caps: Move link config helpers to link caps Imre Deak
2026-04-28 12:51 ` [PATCH 037/108] drm/i915/dp_link_caps: Move link config tracking to link_caps Imre Deak
2026-04-28 12:51 ` [PATCH 038/108] drm/i915/dp_link_caps: Rename helper updating the link configurations Imre Deak
2026-04-28 12:51 ` [PATCH 039/108] drm/i915/dp: Factor out helper to get link rate capabilities Imre Deak
2026-04-28 12:51 ` [PATCH 040/108] drm/i915/dp_link_caps: Pass supported link rates to link caps update Imre Deak
2026-04-28 12:51 ` [PATCH 041/108] drm/i915/dp_link_caps: Add helper to get all supported link rates Imre Deak
2026-04-28 12:51 ` [PATCH 042/108] drm/i915/dp_link_caps: Add helper to get the number of " Imre Deak
2026-04-28 12:51 ` [PATCH 043/108] drm/i915/dp_link_caps: Add helper to get common rate index Imre Deak
2026-04-28 12:51 ` [PATCH 044/108] drm/i915/dp_link_caps: Move tracking of common rates to link_caps struct Imre Deak
2026-04-28 12:51 ` [PATCH 045/108] drm/i915/dp_link_caps: Track max common lane count in link_caps Imre Deak
2026-04-28 12:51 ` [PATCH 046/108] drm/i915/dp_link_caps: Move max lane count change detection to link_caps Imre Deak
2026-04-28 12:51 ` [PATCH 047/108] drm/i915/dp_link_caps: Use max common lane count from link_caps Imre Deak
2026-04-28 12:51 ` [PATCH 048/108] drm/i915/dp_link_caps: Move updating max link limits to link_caps update Imre Deak
2026-04-28 12:51 ` [PATCH 049/108] drm/i915/dp_link_caps: Add helpers to get max link limits Imre Deak
2026-04-28 12:51 ` [PATCH 050/108] drm/i915/dp_link_caps: Add helpers to set " Imre Deak
2026-04-28 12:51 ` [PATCH 051/108] drm/i915/dp_link_caps: Validate " Imre Deak
2026-04-28 12:51 ` [PATCH 052/108] drm/i915/dp_link_caps: Add helper to reset " Imre Deak
2026-04-28 12:51 ` [PATCH 053/108] drm/i915/dp_link_caps: Add helper to reset link_caps state Imre Deak
2026-04-28 12:51 ` [PATCH 054/108] drm/i915/dp_link_caps: Move max link limits to link_caps Imre Deak
2026-04-28 12:51 ` [PATCH 055/108] drm/i915/dp_link_caps: Pass link_caps to static functions Imre Deak
2026-04-28 12:51 ` [PATCH 056/108] drm/i915/dp_link_caps: Pass link_caps to config update/lookup helpers Imre Deak
2026-04-28 12:51 ` [PATCH 057/108] drm/i915/dp_link_caps: Pass link_caps to common rate helpers Imre Deak
2026-04-28 12:51 ` [PATCH 058/108] drm/i915/dp_link_caps: Add link_caps prefix " Imre Deak
2026-04-28 12:51 ` [PATCH 059/108] drm/i915/dp_link_caps: Add missing documentation to exported functions Imre Deak
2026-04-28 12:51 ` [PATCH 060/108] drm/i915/dp_link_caps: Set forced link params before resetting link params Imre Deak
2026-04-28 12:51 ` [PATCH 061/108] drm/i915/dp_link_caps: Adjust max_limits during link config update Imre Deak
2026-04-28 12:51 ` [PATCH 062/108] drm/i915/dp_link_caps: Adjust max_limits when setting or resetting it Imre Deak
2026-04-28 12:51 ` [PATCH 063/108] drm/i915/dp: Simplify the modeset max link rate limit computation Imre Deak
2026-04-28 12:51 ` [PATCH 064/108] drm/i915/dp: Query max limits via link_caps during mode validation Imre Deak
2026-04-28 12:51 ` [PATCH 065/108] drm/i915/dp_tunnel: Query max link limits via link_caps for BW computation Imre Deak
2026-04-28 12:51 ` [PATCH 066/108] drm/i915/doc: Document DP link capabilities Imre Deak
2026-04-28 12:51 ` [PATCH 067/108] drm/i915/dp_link_caps: Move config table members to a substruct Imre Deak
2026-04-28 12:51 ` [PATCH 068/108] drm/i915/dp_link_caps: Factor out a helper to look up a config table rate Imre Deak
2026-04-28 12:51 ` [PATCH 069/108] drm/i915/dp_link_caps: Pass config table pointer to rate lookup helper Imre Deak
2026-04-28 12:51 ` [PATCH 070/108] drm/i915/dp_link_caps: Factor out helper to get link config from table by index Imre Deak
2026-04-28 12:51 ` [PATCH 071/108] drm/i915/dp_link_caps: Add helper to get config at iterator position Imre Deak
2026-04-28 12:51 ` [PATCH 072/108] drm/i915/dp_link_caps: Add helper to find position of matching config Imre Deak
2026-04-28 12:51 ` [PATCH 073/108] drm/i915/dp_link_training: Reset the max link limits in the fallback code Imre Deak
2026-04-28 12:51 ` [PATCH 074/108] drm/i915/dp_link_training: Use config iterator for BW-order fallback Imre Deak
2026-04-28 12:51 ` [PATCH 075/108] drm/i915/dp_link_training: Look up configurations using fuzzy rate matching Imre Deak
2026-04-28 12:51 ` [PATCH 076/108] drm/i915/dp_link_caps: Pass table pointer to the sort compare function Imre Deak
2026-04-28 12:51 ` [PATCH 077/108] drm/i915/dp_link_caps: Compare config tables instead of link parameters Imre Deak
2026-04-28 12:51 ` [PATCH 078/108] drm/i915/dp_link_caps: Precompute config table before update Imre Deak
2026-04-28 12:52 ` [PATCH 079/108] drm/i915/dp_link_caps: Compare internal config entries during table matching Imre Deak
2026-04-28 12:52 ` [PATCH 080/108] drm/i915/dp_link_caps: Use virtual config indexing in config table Imre Deak
2026-04-28 12:52 ` [PATCH 081/108] drm/i915/dp_link_caps: Simplify idx->link rate/lane count lookup Imre Deak
2026-04-28 12:52 ` [PATCH 082/108] drm/i915/dp_link_caps: Simplify BW order pos->config index array Imre Deak
2026-04-28 12:52 ` [PATCH 083/108] drm/i915/dp_link_caps: Add helper to get iteration order for a connector Imre Deak
2026-04-28 12:52 ` [PATCH 084/108] drm/i915/dp_link_caps: Add reset and merge update modes Imre Deak
2026-04-28 12:52 ` [PATCH 085/108] drm/i915/dp_link_caps: Add mask for disabled link configurations Imre Deak
2026-04-28 12:52 ` [PATCH 086/108] drm/i915/dp_link_caps: Add link configuration iterators Imre Deak
2026-04-28 12:52 ` [PATCH 087/108] drm/i915/dp_link_caps: Preserve disabled config mask during merge update Imre Deak
2026-04-28 12:52 ` [PATCH 088/108] drm/i915/dp_link_caps: Account for disabled configs during max link info update Imre Deak
2026-04-28 12:52 ` [PATCH 089/108] drm/i915/dp_link_caps: Add debugfs entry showing allowed configurations Imre Deak
2026-04-28 12:52 ` [PATCH 090/108] drm/i915/dp: Add a mask of valid configurations for modeset computation Imre Deak
2026-04-28 12:52 ` [PATCH 091/108] drm/i915/dp: Iterate configurations via link_caps for SST non-DSC Imre Deak
2026-04-28 12:52 ` [PATCH 092/108] drm/i915/dp: Iterate configurations via link_caps for SST DSC Imre Deak
2026-04-28 12:52 ` [PATCH 093/108] drm/i915/dp: Use link caps for eDP DSC config selection Imre Deak
2026-04-28 12:52 ` [PATCH 094/108] drm/i915/dp_mst: Use link caps for non-DSC " Imre Deak
2026-04-28 12:52 ` [PATCH 095/108] drm/i915/dp_mst: Use link caps for MST DSC " Imre Deak
2026-04-28 12:52 ` [PATCH 096/108] drm/i915/dp_test: Use link caps for compliance link configs Imre Deak
2026-04-28 12:52 ` [PATCH 097/108] drm/i915/dp: Remove min/max link config limits Imre Deak
2026-04-28 12:52 ` [PATCH 098/108] drm/i915/dp_link_training: Account for disabled configs during SST fallback Imre Deak
2026-04-28 12:52 ` [PATCH 099/108] drm/i915/dp_link_training: Disable failed config during fallback Imre Deak
2026-04-28 12:52 ` [PATCH 100/108] drm/i915/kunit: Enable KUnit tests Imre Deak
2026-04-28 12:52 ` [PATCH 101/108] drm/i915/kunit: Add DP link test stub Imre Deak
2026-04-29  7:36   ` [PATCH v2 " Imre Deak
2026-04-28 12:52 ` [PATCH 102/108] drm/xe/kunit: Add display test config Imre Deak
2026-04-28 12:52 ` [PATCH 103/108] drm/xe/kunit: Build DP link display tests Imre Deak
2026-04-28 12:52 ` [PATCH 104/108] drm/i915/kunit: setup DP link test context Imre Deak
2026-04-28 12:52 ` [PATCH 105/108] drm/i915/kunit: Export link training and caps funcs for testing Imre Deak
2026-04-28 12:52 ` [PATCH 106/108] drm/i915/kunit: DP link: add baseline fixed table reference test Imre Deak
2026-04-28 12:52 ` [PATCH 107/108] drm/i915/kunit: DP link: add update config tests Imre Deak
2026-04-28 12:52 ` Imre Deak [this message]
2026-04-28 14:38 ` ✗ Fi.CI.BUILD: failure for drm/i915/dp_link: Refactor DP link capability logic Patchwork
2026-04-29  9:17 ` ✓ i915.CI.BAT: success for drm/i915/dp_link: Refactor DP link capability logic (rev2) Patchwork
2026-04-29 15:35 ` ✗ i915.CI.Full: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260428125233.1664668-109-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox