Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Nautiyal, Ankit K" <ankit.k.nautiyal@intel.com>
To: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>,
	<intel-gfx@lists.freedesktop.org>
Subject: Re: [Intel-gfx] [PATCH 1/3] drm: Add Adaptive Sync SDP logging
Date: Thu, 23 Nov 2023 20:52:53 +0530	[thread overview]
Message-ID: <299d40e5-7866-92ed-9f57-ea1ac96de526@intel.com> (raw)
In-Reply-To: <20231123140244.4183869-2-mitulkumar.ajitkumar.golani@intel.com>


On 11/23/2023 7:32 PM, Mitul Golani wrote:
> Add structure representing Adaptive Sync Secondary Data
> Packet (AS SDP). Also, add Adaptive Sync SDP logging in
> drm_dp_helper.c to facilitate debugging.
>
> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
> ---
>   drivers/gpu/drm/display/drm_dp_helper.c | 15 +++++++++++++
>   include/drm/display/drm_dp.h            |  1 +
>   include/drm/display/drm_dp_helper.h     | 30 +++++++++++++++++++++++++
>   3 files changed, 46 insertions(+)
>
> diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
> index d72b6f9a352c..a205e14a6681 100644
> --- a/drivers/gpu/drm/display/drm_dp_helper.c
> +++ b/drivers/gpu/drm/display/drm_dp_helper.c
> @@ -2917,6 +2917,21 @@ void drm_dp_vsc_sdp_log(const char *level, struct device *dev,
>   }
>   EXPORT_SYMBOL(drm_dp_vsc_sdp_log);
>   
> +void drm_dp_as_sdp_log(const char *level, struct device *dev,
> +		       const struct drm_dp_as_sdp *async)

Perhaps as_sdp, instead of async to avoid confusion?


> +{
> +#define DP_SDP_LOG(fmt, ...) dev_printk(level, dev, fmt, ##__VA_ARGS__)
> +	DP_SDP_LOG("DP SDP: %s, revision %u, length %u\n", "VSC",

I think you mean AS_SDP here.

Also, you need to send this to dri-devel as well.

Regards,

Ankit


> +		   async->revision, async->length);
> +	DP_SDP_LOG("	vmin: %d vmax: %d\n", async->vmin, async->vmax);
> +	DP_SDP_LOG("    target_rr: %s\n", async->target_rr);
> +	DP_SDP_LOG("    duration_incr_ms: %u\n", async->duration_incr_ms);
> +	DP_SDP_LOG("    duration_decr_ms: %u\n", async->duration_decr_ms);
> +	DP_SDP_LOG("    operation_mode: %u\n", async->operation_mode);
> +#undef DP_SDP_LOG
> +}
> +EXPORT_SYMBOL(drm_dp_as_sdp_log);
> +
>   /**
>    * drm_dp_get_pcon_max_frl_bw() - maximum frl supported by PCON
>    * @dpcd: DisplayPort configuration data
> diff --git a/include/drm/display/drm_dp.h b/include/drm/display/drm_dp.h
> index 83d2039c018b..0575ab8ea088 100644
> --- a/include/drm/display/drm_dp.h
> +++ b/include/drm/display/drm_dp.h
> @@ -1578,6 +1578,7 @@ enum drm_dp_phy {
>   #define DP_SDP_PPS			0x10 /* DP 1.4 */
>   #define DP_SDP_VSC_EXT_VESA		0x20 /* DP 1.4 */
>   #define DP_SDP_VSC_EXT_CEA		0x21 /* DP 1.4 */
> +#define DP_SDP_ADAPTIVE_SYNC	0x22 /* DP 1.4 */
>   /* 0x80+ CEA-861 infoframe types */
>   
>   #define DP_SDP_AUDIO_INFOFRAME_HB2	0x1b
> diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
> index 863b2e7add29..63b6bef3f21d 100644
> --- a/include/drm/display/drm_dp_helper.h
> +++ b/include/drm/display/drm_dp_helper.h
> @@ -98,6 +98,36 @@ struct drm_dp_vsc_sdp {
>   	enum dp_content_type content_type;
>   };
>   
> +/**
> + * struct drm_dp_as_sdp - drm DP Adaptive Sync SDP
> + *
> + * This structure represents a DP AS SDP of drm
> + * It is based on DP 2.1 spec [Table 2-126:  Adaptive-Sync SDP Header Bytes] and
> + * [Table 2-127: Adaptive-Sync SDP Payload for DB0 through DB8]
> + *
> + * @sdp_type: secondary-data packet type
> + * @length: number of valid data bytes
> + * @vmin: minimum vtotal
> + * @vmax: maximum vtotal
> + * @duration_incr_ms: Successive frame duration increase
> + * @duration_decr_ms: Successive frame duration decrease
> + * @operation_mode: Adaptive Sync Operation Mode
> + */
> +
> +struct drm_dp_as_sdp {
> +	unsigned char sdp_type;
> +	unsigned char revision;
> +	unsigned char length;
> +	u16 vmin, vmax;
> +	u16 target_rr;
> +	u8 duration_incr_ms;
> +	u8 duration_decr_ms;
> +	u8 operation_mode;
> +};
> +
> +void drm_dp_as_sdp_log(const char *level, struct device *dev,
> +		       const struct drm_dp_as_sdp *async);
> +
>   void drm_dp_vsc_sdp_log(const char *level, struct device *dev,
>   			const struct drm_dp_vsc_sdp *vsc);
>   

  reply	other threads:[~2023-11-23 15:23 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-23 14:02 [Intel-gfx] [PATCH 0/3] Enable Adaptive Sync SDP Support for DP Mitul Golani
2023-11-23 14:02 ` [Intel-gfx] [PATCH 1/3] drm: Add Adaptive Sync SDP logging Mitul Golani
2023-11-23 15:22   ` Nautiyal, Ankit K [this message]
2023-11-24  5:58   ` kernel test robot
2023-11-24  7:56   ` kernel test robot
2023-11-24 12:53   ` Jani Nikula
2023-11-23 14:02 ` [Intel-gfx] [PATCH 2/3] drm/i915/display/: Add Read/Write support for Adaptive Sync SDP Mitul Golani
2023-11-24 13:01   ` Jani Nikula
2023-11-24 13:01   ` Jani Nikula
2023-11-27 11:04   ` Nautiyal, Ankit K
2023-11-23 14:02 ` [Intel-gfx] [PATCH 3/3] drm/i915/display/:Compute and enable daptive " Mitul Golani
2023-11-27 11:04   ` Nautiyal, Ankit K
2023-11-23 19:48 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for Enable Adaptive Sync SDP Support for DP Patchwork
2023-11-23 20:06 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=299d40e5-7866-92ed-9f57-ea1ac96de526@intel.com \
    --to=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=mitulkumar.ajitkumar.golani@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox