Re: [Intel-gfx] [v4 0/5] DSI driver improvement

["Kulkarni, Vandita" <vandita.kulkarni@intel.com>]

> -----Original Message-----
> From: Lee, Shawn C <shawn.c.lee@intel.com>
> Sent: Wednesday, September 8, 2021 6:42 PM
> To: Nikula, Jani <jani.nikula@intel.com>; intel-gfx@lists.freedesktop.org
> Cc: ville.syrjala@linux.intel.com; Kulkarni, Vandita
> <vandita.kulkarni@intel.com>; Chiou, Cooper <cooper.chiou@intel.com>;
> Tseng, William <william.tseng@intel.com>
> Subject: RE: [v4 0/5] DSI driver improvement
> 
> On Wed, 08 Sep 2021, Jani Nikula <jani.nikula@intel.com> wrote:
> >On Wed, 08 Sep 2021, Lee Shawn C <shawn.c.lee@intel.com> wrote:
> >> v2: Get data length of brightness value more easily while driver try to
> >>     read/write MIPI_DCS_DISPLAY_BRIGHTNESS command.
> >> v3: fix checkpatch warning.
> >
> >The series is v4, what's new here?
> >
> >BR,
> >Jani.
> >
> 
> We don't change anything, just rebase.
> 
> Best regards,
> Shawn

Thanks for the patches and reviews.
Pushed v4 based on results on v3 as there is no change.

Thanks,
Vandita
> 
> >
> >>
> >> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
> >>
> >> Lee Shawn C (5):
> >>   drm/i915/dsi: wait for header and payload credit available
> >>   drm/i915/dsi: refine send MIPI DCS command sequence
> >>   drm/i915: Get proper min cdclk if vDSC enabled
> >>   drm/i915/dsi: Retrieve max brightness level from VBT
> >>   drm/i915/dsi: Read/write proper brightness value via MIPI DCS command
> >>
> >>  drivers/gpu/drm/i915/display/icl_dsi.c        | 50 +++++++++----------
> >>  drivers/gpu/drm/i915/display/intel_bios.c     |  3 ++
> >>  drivers/gpu/drm/i915/display/intel_cdclk.c    | 10 ++++
> >>  .../i915/display/intel_dsi_dcs_backlight.c    | 33 ++++++++----
> >>  drivers/gpu/drm/i915/i915_drv.h               |  1 +
> >>  5 files changed, 62 insertions(+), 35 deletions(-)
> >
> >--
> >Jani Nikula, Intel Open Source Graphics Center
> >