From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, Intel-gfx@lists.freedesktop.org
Cc: Xiaogang Li <xiaogang.li@intel.com>
Subject: Re: [Intel-gfx] [PATCH] drm/i915: Special handling for bonded requests
Date: Wed, 27 May 2020 10:36:31 +0100 [thread overview]
Message-ID: <34f248f6-264b-e5ae-e084-ce4ab402457b@linux.intel.com> (raw)
In-Reply-To: <159057120157.30979.18380265534198859105@build.alporthouse.com>
On 27/05/2020 10:20, Chris Wilson wrote:
> Quoting Tvrtko Ursulin (2020-05-27 09:53:22)
>> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>
>> Our generic mechanism for specifying aligned request start,
>> I915_EXEC_FENCE_SUBMIT, has a bit too relaxed rules when it comes to the
>> actual use case of media scalability on Tigerlake.
>>
>> While the submit fence can provide the aligned start, the actual media
>> pipeline expects that execution remains in lockstep from then onwards.
>> Otherwise the hardware cannot handle well one of the pair getting
>> preempted leading to GPU hangs and corrupted media playback.
>>
>> This puts us in a difficult position where the only visible solution,
>> which does not involve adding new uapi, is to give more meaning to the
>> generic submit fence. At least when used between the video engines.
>>
>> The special semantics this patch applies in that case are two fold. First
>> is that both of the aligned pairs will be marked as non-preemptable and
>> second is ensuring both are not sharing ELSP ports with any other context.
>>
>> Non-preemptable property will ensure that once the start has been aligned
>> the requests remain executing until completion.
>>
>> Single port ELSP property will ensure there are no possible inversions
>> between different independent pairs of aligned requests.
>
> Nak.
>
>> Going forward we can think of introducing new uapi to request this
>> behaviour as a separate, more explicit flag, and at that point retire this
>> semi-generic special handling.
>
> As CI will say, such behaviour will already need a new flag. Forcing
> no-preemption should be a privileged flag, so I would expect some
> acknowledge that this is a HW problem that we have to workaround.
I don't know how hw exactly works so from my side it's only empirical.
I agree new flag is needed but we also need a fix ASAP for TGL. And I
don't think we can add new uapi in a reasonable time frame here. We
would need the ctx set_parallel extension with a dont-preempt flag and
multi-batch execbuf. And a lot of work in media-driver which will not be
ready for TGL. I don't think a flag at the I915_EXEC_FENCE_SUBMIT level
is a solution.
>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>> Suggested-by: Xiaogang Li <xiaogang.li@intel.com>
>> Cc: Chris Wilson <chris@chris-wilson.co.uk>
>> ---
>> drivers/gpu/drm/i915/gt/intel_context.h | 2 +-
>> drivers/gpu/drm/i915/gt/intel_lrc.c | 46 +++++++++++++++++++++----
>> 2 files changed, 41 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/gt/intel_context.h b/drivers/gpu/drm/i915/gt/intel_context.h
>> index 07be021882cc..576d11c0cdd9 100644
>> --- a/drivers/gpu/drm/i915/gt/intel_context.h
>> +++ b/drivers/gpu/drm/i915/gt/intel_context.h
>> @@ -212,7 +212,7 @@ intel_context_force_single_submission(const struct intel_context *ce)
>> static inline void
>> intel_context_set_single_submission(struct intel_context *ce)
>> {
>> - __set_bit(CONTEXT_FORCE_SINGLE_SUBMISSION, &ce->flags);
>> + set_bit(CONTEXT_FORCE_SINGLE_SUBMISSION, &ce->flags);
>> }
>>
>> static inline bool
>> diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c
>> index 3214a4ecc31a..88cf20fd92c8 100644
>> --- a/drivers/gpu/drm/i915/gt/intel_lrc.c
>> +++ b/drivers/gpu/drm/i915/gt/intel_lrc.c
>> @@ -1734,8 +1734,7 @@ static void execlists_submit_ports(struct intel_engine_cs *engine)
>>
>> static bool ctx_single_port_submission(const struct intel_context *ce)
>> {
>> - return (IS_ENABLED(CONFIG_DRM_I915_GVT) &&
>> - intel_context_force_single_submission(ce));
>> + return intel_context_force_single_submission(ce);
>> }
>>
>> static bool can_merge_ctx(const struct intel_context *prev,
>> @@ -4929,9 +4928,41 @@ static void execlists_park(struct intel_engine_cs *engine)
>> cancel_timer(&engine->execlists.preempt);
>> }
>>
>> +static void
>> +mark_bonded_pair(struct i915_request *rq, struct i915_request *signal)
>> +{
>> + /*
>> + * Give (temporary) special meaning to a pair requests with requested
>> + * aligned start along the video engines.
>> + *
>> + * They should be non-preemptable and have all ELSP ports to themselves
>> + * to avoid any deadlocks caused by inversions.
>
> This sentence needs expanding, because you are implying that this is an
> issue we need to address in the code. If there is a deadlock resulting
> from incorrect submission ordering, that is a bug in the code.
If we add no-preempt I think we have to have single elsp because there
is no ordering between unrelated pairs and then elsp inversion certainly
sounds like a deadlock.
ctx-A: vcs0 + vcs1
ctx-B: vcs0 + vcs1
There is no ordering between A and B but we'd have to pick same port for
both pairs of A and B respectively. I don't see that we can do that
since all four submissions are async.
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-05-27 9:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 8:53 [Intel-gfx] [PATCH] drm/i915: Special handling for bonded requests Tvrtko Ursulin
2020-05-27 9:20 ` Chris Wilson
2020-05-27 9:36 ` Tvrtko Ursulin [this message]
2020-05-27 10:05 ` Chris Wilson
2020-05-27 9:29 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2020-05-27 9:50 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-05-27 10:52 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-05-28 9:57 ` [Intel-gfx] [PATCH] " Chris Wilson
2020-05-28 10:20 ` Tvrtko Ursulin
2020-05-28 20:23 ` Chris Wilson
2020-05-29 7:25 ` Tvrtko Ursulin
2020-05-28 20:56 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915: Special handling for bonded requests (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=34f248f6-264b-e5ae-e084-ce4ab402457b@linux.intel.com \
--to=tvrtko.ursulin@linux.intel.com \
--cc=Intel-gfx@lists.freedesktop.org \
--cc=chris@chris-wilson.co.uk \
--cc=xiaogang.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox