From: Harry Wentland <harry.wentland@amd.com>
To: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>,
dri-devel@lists.freedesktop.org, amd-gfx@lists.freedesktop.org,
intel-gfx@lists.freedesktop.org, jani.nikula@intel.com,
Nicholas.Kazlauskas@amd.com, wayne.lin@amd.com
Subject: Re: [Intel-gfx] [PATCH v3] drm/dp: Add Additional DP2 Headers
Date: Fri, 8 Oct 2021 17:03:09 -0400 [thread overview]
Message-ID: <38c561f6-1bbf-a01b-bd28-2065a9889c50@amd.com> (raw)
In-Reply-To: <06786045-115d-5b42-4ee1-33cd27d1b0c3@linux.intel.com>
On 2021-10-08 04:36, Tvrtko Ursulin wrote:
>
> Hi,
>
> Is it my checkout only or this causes a lot of build warnings for everyone?
>
> ./include/drm/drm_dp_helper.h:1120: warning: "DP_TEST_264BIT_CUSTOM_PATTERN_7_0" redefined
> 1120 | #define DP_TEST_264BIT_CUSTOM_PATTERN_7_0 0x2230
> |
> In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_types.h:35,
> from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services_types.h:30,
> from ./drivers/gpu/drm/amd/amdgpu/../include/dm_pp_interface.h:26,
> from drivers/gpu/drm/amd/amdgpu/amdgpu.h:66,
> from drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c:40:
> ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dp_types.h:871: note: this is the location of the previous definition
>
> Etc..
>
Fixed by https://patchwork.freedesktop.org/patch/456190/?series=95166&rev=2 but looks like it's not in drm-misc-next.
Siqueira, do you have bandwidth to pull that patch into drm-misc-next?
Harry
> Regards,
>
> Tvrtko
>
>
> On 30/09/2021 22:21, Rodrigo Siqueira wrote:
>> Applied to drm-misc-next.
>>
>> Thanks
>>
>> On 09/28, Harry Wentland wrote:
>>> On 2021-09-27 15:23, Fangzhi Zuo wrote:
>>>> Include FEC, DSC, Link Training related headers.
>>>>
>>>> Change since v2
>>>> - Align with the spec for DP_DSC_SUPPORT_AND_DSC_DECODER_COUNT
>>>>
>>>> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
>>>
>>> Reviewed-by: Harry Wentland <harry.wentland@amd.com>
>>>
>>> Harry
>>>
>>>> ---
>>>> This patch is based on top of the other DP2.0 work in
>>>> "drm/dp: add LTTPR DP 2.0 DPCD addresses"
>>>> ---
>>>> include/drm/drm_dp_helper.h | 20 ++++++++++++++++++++
>>>> 1 file changed, 20 insertions(+)
>>>>
>>>> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
>>>> index 1d5b3dbb6e56..a1df35aa6e68 100644
>>>> --- a/include/drm/drm_dp_helper.h
>>>> +++ b/include/drm/drm_dp_helper.h
>>>> @@ -453,6 +453,7 @@ struct drm_panel;
>>>> # define DP_FEC_UNCORR_BLK_ERROR_COUNT_CAP (1 << 1)
>>>> # define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2)
>>>> # define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3)
>>>> +#define DP_FEC_CAPABILITY_1 0x091 /* 2.0 */
>>>> /* DP-HDMI2.1 PCON DSC ENCODER SUPPORT */
>>>> #define DP_PCON_DSC_ENCODER_CAP_SIZE 0xC /* 0x9E - 0x92 */
>>>> @@ -537,6 +538,9 @@ struct drm_panel;
>>>> #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 0x0a1
>>>> #define DP_DSC_BRANCH_MAX_LINE_WIDTH 0x0a2
>>>> +/* DFP Capability Extension */
>>>> +#define DP_DFP_CAPABILITY_EXTENSION_SUPPORT 0x0a3 /* 2.0 */
>>>> +
>>>> /* Link Configuration */
>>>> #define DP_LINK_BW_SET 0x100
>>>> # define DP_LINK_RATE_TABLE 0x00 /* eDP 1.4 */
>>>> @@ -688,6 +692,7 @@ struct drm_panel;
>>>> #define DP_DSC_ENABLE 0x160 /* DP 1.4 */
>>>> # define DP_DECOMPRESSION_EN (1 << 0)
>>>> +#define DP_DSC_CONFIGURATION 0x161 /* DP 2.0 */
>>>> #define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */
>>>> # define DP_PSR_ENABLE BIT(0)
>>>> @@ -743,6 +748,7 @@ struct drm_panel;
>>>> # define DP_RECEIVE_PORT_0_STATUS (1 << 0)
>>>> # define DP_RECEIVE_PORT_1_STATUS (1 << 1)
>>>> # define DP_STREAM_REGENERATION_STATUS (1 << 2) /* 2.0 */
>>>> +# define DP_INTRA_HOP_AUX_REPLY_INDICATION (1 << 3) /* 2.0 */
>>>> #define DP_ADJUST_REQUEST_LANE0_1 0x206
>>>> #define DP_ADJUST_REQUEST_LANE2_3 0x207
>>>> @@ -865,6 +871,8 @@ struct drm_panel;
>>>> # define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4
>>>> # define DP_PHY_TEST_PATTERN_CP2520 0x5
>>>> +#define DP_PHY_SQUARE_PATTERN 0x249
>>>> +
>>>> #define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A
>>>> #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250
>>>> #define DP_TEST_80BIT_CUSTOM_PATTERN_15_8 0x251
>>>> @@ -1109,6 +1117,18 @@ struct drm_panel;
>>>> #define DP_128B132B_TRAINING_AUX_RD_INTERVAL 0x2216 /* 2.0 */
>>>> # define DP_128B132B_TRAINING_AUX_RD_INTERVAL_MASK 0x7f
>>>> +#define DP_TEST_264BIT_CUSTOM_PATTERN_7_0 0x2230
>>>> +#define DP_TEST_264BIT_CUSTOM_PATTERN_263_256 0x2250
>>>> +
>>>> +/* DSC Extended Capability Branch Total DSC Resources */
>>>> +#define DP_DSC_SUPPORT_AND_DSC_DECODER_COUNT 0x2260 /* 2.0 */
>>>> +# define DP_DSC_DECODER_COUNT_MASK (0b111 << 5)
>>>> +# define DP_DSC_DECODER_COUNT_SHIFT 5
>>>> +#define DP_DSC_MAX_SLICE_COUNT_AND_AGGREGATION_0 0x2270 /* 2.0 */
>>>> +# define DP_DSC_DECODER_0_MAXIMUM_SLICE_COUNT_MASK (1 << 0)
>>>> +# define DP_DSC_DECODER_0_AGGREGATION_SUPPORT_MASK (0b111 << 1)
>>>> +# define DP_DSC_DECODER_0_AGGREGATION_SUPPORT_SHIFT 1
>>>> +
>>>> /* Protocol Converter Extension */
>>>> /* HDMI CEC tunneling over AUX DP 1.3 section 5.3.3.3.1 DPCD 1.4+ */
>>>> #define DP_CEC_TUNNELING_CAPABILITY 0x3000
>>>>
>>>
>>
next prev parent reply other threads:[~2021-10-08 21:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-27 19:23 [Intel-gfx] [PATCH v3] drm/dp: Add Additional DP2 Headers Fangzhi Zuo
2021-09-28 12:28 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/dp: Add Additional DP2 Headers (rev3) Patchwork
2021-09-28 12:55 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-09-28 14:17 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-09-28 15:19 ` [Intel-gfx] [PATCH v3] drm/dp: Add Additional DP2 Headers Harry Wentland
2021-09-30 21:21 ` Rodrigo Siqueira
2021-10-08 8:36 ` Tvrtko Ursulin
2021-10-08 21:03 ` Harry Wentland [this message]
2022-02-03 11:58 ` [Intel-gfx] binary constants (was: Re: [PATCH v3] drm/dp: Add Additional DP2 Headers) Jani Nikula
2022-02-03 12:57 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=38c561f6-1bbf-a01b-bd28-2065a9889c50@amd.com \
--to=harry.wentland@amd.com \
--cc=Jerry.Zuo@amd.com \
--cc=Nicholas.Kazlauskas@amd.com \
--cc=Rodrigo.Siqueira@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=tvrtko.ursulin@linux.intel.com \
--cc=wayne.lin@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox