Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Kenneth Graunke <kenneth@whitecape.org>
To: Eugeni Dodonov <eugeni.dodonov@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/3] drm/i915: gen7: implement rczunit workaround
Date: Mon, 06 Feb 2012 15:33:48 -0800	[thread overview]
Message-ID: <4F30635C.9050002@whitecape.org> (raw)
In-Reply-To: <1328482026-28420-2-git-send-email-eugeni.dodonov@intel.com>

On 02/05/2012 02:47 PM, Eugeni Dodonov wrote:
> This is yet another workaround related to clock gating which we need on
> Ivy Bridge.
>
> Signed-off-by: Eugeni Dodonov<eugeni.dodonov@intel.com>
> ---
>   drivers/gpu/drm/i915/i915_reg.h      |    1 +
>   drivers/gpu/drm/i915/intel_display.c |   14 +++++++++++---
>   2 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index c3afb78..80fd6b5 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3618,6 +3618,7 @@
>   #define    GT_FIFO_NUM_RESERVED_ENTRIES		20
>
>   #define GEN6_UCGCTL2				0x9404
> +# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE		(1<<  13)
>   # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE		(1<<  12)
>   # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE		(1<<  11)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index f1744aa..1defd42 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -8396,6 +8396,7 @@ static void gen6_init_clock_gating(struct drm_device *dev)
>   	struct drm_i915_private *dev_priv = dev->dev_private;
>   	int pipe;
>   	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
> +	u32 gstate;
>
>   	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
>
> @@ -8416,10 +8417,17 @@ static void gen6_init_clock_gating(struct drm_device *dev)
>   	 *
>   	 * According to the spec, bit 11 (RCCUNIT) must also be set,
>   	 * but we didn't debug actual testcases to find it out.
> +	 *
> +	 * The bit 13 (RCZUNIT) must also be set, to implement the
> +	 * WaDisableRCZUnitClockGating workaround on Ivy Bridge.
>   	 */
> -	I915_WRITE(GEN6_UCGCTL2,
> -		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
> -		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
> +	gstate = GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
> +		GEN6_RCCUNIT_CLOCK_GATE_DISABLE;
> +
> +	if (IS_IVYBRIDGE(dev))
> +		gstate |= GEN6_RCZUNIT_CLOCK_GATE_DISABLE;
> +
> +	I915_WRITE(GEN6_UCGCTL2, gstate);
>
>   	/*
>   	 * According to the spec the following bits should be

Nack.  gen6_init_clock_gating won't get run on Ivybridge...

  reply	other threads:[~2012-02-06 23:33 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-03 20:22 [PATCH] Ivybridge fixes Eugeni Dodonov
2012-02-03 20:22 ` [PATCH 1/4] drm/i915: gen7: implement rczunit workaround Eugeni Dodonov
2012-02-03 20:22 ` [PATCH 2/4] drm/i915: gen7: add two more IVB workarounds Eugeni Dodonov
2012-02-04  0:45   ` Kenneth Graunke
2012-02-04  0:48   ` Kenneth Graunke
2012-02-03 20:22 ` [PATCH 3/4] drm/i915: gen7: work around a system hang on IVB Eugeni Dodonov
2012-02-04  0:50   ` Kenneth Graunke
2012-02-03 20:22 ` [PATCH 4/4] drm/i915: gen7: another IVB workaround Eugeni Dodonov
2012-02-05 22:47 ` [PATCH 0/3] Ivy Bridge hard-hang fixes Eugeni Dodonov
2012-02-05 22:47   ` [PATCH 1/3] drm/i915: gen7: implement rczunit workaround Eugeni Dodonov
2012-02-06 23:33     ` Kenneth Graunke [this message]
2012-02-05 22:47   ` [PATCH 2/3] drm/i915: gen7: add two more IVB workarounds Eugeni Dodonov
2012-02-06 22:22     ` Kenneth Graunke
2012-02-07 19:48     ` Eric Anholt
2012-02-05 22:47   ` [PATCH 3/3] drm/i915: gen7: work around a system hang on IVB Eugeni Dodonov
2012-02-07 19:46     ` Eric Anholt
2012-02-06 23:25   ` [PATCH 0/3] Ivy Bridge hard-hang fixes Keith Packard
2012-02-07  0:01     ` Eugeni Dodonov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F30635C.9050002@whitecape.org \
    --to=kenneth@whitecape.org \
    --cc=eugeni.dodonov@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox