From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Ander Conselvan De Oliveira <conselvan2@gmail.com>,
intel-gfx@lists.freedesktop.org,
Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Subject: Re: ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915: Splitting intel_dp_detect
Date: Mon, 4 Apr 2016 11:31:04 +0100 [thread overview]
Message-ID: <57024268.7000909@linux.intel.com> (raw)
In-Reply-To: <1459496485.2777.8.camel@gmail.com>
On 01/04/16 08:41, Ander Conselvan De Oliveira wrote:
> On Thu, 2016-03-31 at 12:38 +0000, Patchwork wrote:
>> == Series Details ==
>>
>> Series: series starting with [1/5] drm/i915: Splitting intel_dp_detect
>> URL : https://patchwork.freedesktop.org/series/5044/
>> State : success
>
> I pushed those to dinq.
This series seems to break eDP detection on BDW RVP.
Old kernel:
[ 1.554183] [drm:intel_dp_init_connector] Adding eDP connector on port A
[ 1.554245] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
[ 1.554254] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[ 1.554263] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
[ 1.554271] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[ 1.554279] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
[ 1.554530] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[ 1.554562] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 1.556670] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
[ 1.557617] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
[ 1.557627] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
[ 1.557633] [drm:intel_dp_print_rates] sink rates: 162000, 270000
[ 1.557638] [drm:intel_dp_print_rates] common rates: 162000, 270000
[ 1.557651] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
[ 1.567299] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 1.567308] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
[ 1.567319] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937
Todays nightly:
[ 4.306321] [drm:intel_dp_init_connector] Adding eDP connector on port A
[ 4.306370] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
[ 4.306371] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[ 4.306373] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
[ 4.306374] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[ 4.306375] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
[ 4.306402] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[ 4.306413] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 4.319361] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.331840] [drm] failed to retrieve link info, disabling eDP
[ 4.331862] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
Series reverted:
[ 4.770004] [drm:intel_dp_init_connector] Adding eDP connector on port A
[ 4.777651] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
[ 4.788222] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[ 4.798890] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
[ 4.811424] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[ 4.820705] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
[ 4.828631] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[ 4.835061] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 4.843757] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
[ 4.853032] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
[ 4.861624] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
[ 4.869551] [drm:intel_dp_print_rates] sink rates: 162000, 270000
[ 4.876558] [drm:intel_dp_print_rates] common rates: 162000, 270000
[ 4.883812] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
[ 4.900522] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet, b6:c3:97:fe:06:71
[ 4.905379] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[ 4.905380] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
[ 4.905385] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-04-04 10:31 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-30 12:35 [PATCH 1/5] drm/i915: Splitting intel_dp_detect Shubhangi Shrivastava
2016-03-30 12:35 ` [PATCH 2/5] drm/i915: Cleaning up intel_dp_hpd_pulse Shubhangi Shrivastava
2016-03-30 12:35 ` [PATCH 3/5] drm/i915: Reorganizing intel_dp_check_link_status Shubhangi Shrivastava
2016-03-30 12:35 ` [PATCH 4/5] drm/i915: Read sink_count dpcd always Shubhangi Shrivastava
2016-03-30 12:35 ` [PATCH 5/5] drm/i915: force full detect on sink count change Shubhangi Shrivastava
2016-03-31 12:38 ` ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915: Splitting intel_dp_detect Patchwork
2016-04-01 7:41 ` Ander Conselvan De Oliveira
2016-04-04 10:31 ` Tvrtko Ursulin [this message]
2016-04-04 11:08 ` Jani Nikula
2016-04-04 11:41 ` Tvrtko Ursulin
2016-04-06 14:38 ` Tvrtko Ursulin
2016-04-07 7:58 ` Jani Nikula
2016-04-07 8:24 ` Ander Conselvan De Oliveira
2016-04-07 9:56 ` Thulasimani, Sivakumar
2016-04-07 10:12 ` Shubhangi Shrivastava
2016-04-07 10:00 ` Tvrtko Ursulin
2016-04-07 10:56 ` Joonas Lahtinen
2016-04-04 11:07 ` Shubhangi Shrivastava
-- strict thread matches above, loose matches on Subject: below --
2016-02-01 11:42 [PATCH 1/5] " Shubhangi Shrivastava
2016-02-01 12:15 ` ✓ Fi.CI.BAT: success for series starting with [1/5] " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57024268.7000909@linux.intel.com \
--to=tvrtko.ursulin@linux.intel.com \
--cc=conselvan2@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=shubhangi.shrivastava@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox