Re: [PATCH 07/12] drm/i915/display: Configure the second scaler for

["Nautiyal, Ankit K" <ankit.k.nautiyal@intel.com>]

On 3/21/2025 9:36 PM, Nemesa Garg wrote:
> sharpness

This again is part of subject.


> As only second scaler can be used for sharpness check if it
> is available and also check if panel fitting is not enabled,
> then set the sharpness as both uses pipe scaler so only one
> can be enabled at a time.

This can be improved. Avoid having one long sentence for the commit message.

Regards,

Ankit


>
> v2: Add the panel fitting check before enabling sharpness
> v3: Reframe commit message[Arun]
> v4: Replace string based comparison with plane_state[Jani]
> v5: Rebase
> v6: Fix build issue
> v7: Remove scaler id from verify_crtc_state[Ankit]
> v8: Change the patch title. Add code comment.
>      Move the config part in patch#6. [Ankit]
> v9: Refactor the patch[Ankit]
>
> Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
> ---
>   drivers/gpu/drm/i915/display/intel_casf.c    |  8 +++++++
>   drivers/gpu/drm/i915/display/intel_casf.h    |  1 +
>   drivers/gpu/drm/i915/display/intel_display.c |  4 +++-
>   drivers/gpu/drm/i915/display/skl_scaler.c    | 25 +++++++++++++++-----
>   4 files changed, 31 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_casf.c b/drivers/gpu/drm/i915/display/intel_casf.c
> index 4c41a41872bd..367a73a91ae6 100644
> --- a/drivers/gpu/drm/i915/display/intel_casf.c
> +++ b/drivers/gpu/drm/i915/display/intel_casf.c
> @@ -148,6 +148,14 @@ void intel_casf_sharpness_get_config(struct intel_crtc_state *crtc_state)
>   	}
>   }
>   
> +bool intel_casf_needs_scaler(const struct intel_crtc_state *crtc_state)
> +{
> +	if (crtc_state->hw.casf_params.casf_enable)
> +		return true;
> +
> +	return false;
> +}
> +
>   static int casf_coeff_tap(int i)
>   {
>   	return i % SCALER_FILTER_NUM_TAPS;
> diff --git a/drivers/gpu/drm/i915/display/intel_casf.h b/drivers/gpu/drm/i915/display/intel_casf.h
> index 381d5e10c70d..026a2b8348df 100644
> --- a/drivers/gpu/drm/i915/display/intel_casf.h
> +++ b/drivers/gpu/drm/i915/display/intel_casf.h
> @@ -17,5 +17,6 @@ void intel_casf_sharpness_get_config(struct intel_crtc_state *crtc_state);
>   void intel_filter_lut_load(struct intel_crtc *crtc,
>   			   const struct intel_crtc_state *crtc_state);
>   void intel_casf_scaler_compute_config(struct intel_crtc_state *crtc_state);
> +bool intel_casf_needs_scaler(const struct intel_crtc_state *crtc_state);
>   
>   #endif /* __INTEL_CASF_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index b852ffe94a10..4ffe738ad725 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -60,6 +60,7 @@
>   #include "intel_audio.h"
>   #include "intel_bo.h"
>   #include "intel_bw.h"
> +#include "intel_casf.h"
>   #include "intel_cdclk.h"
>   #include "intel_clock_gating.h"
>   #include "intel_color.h"
> @@ -4225,7 +4226,8 @@ static int intel_crtc_atomic_check(struct intel_atomic_state *state,
>   
>   	if (DISPLAY_VER(display) >= 9) {
>   		if (intel_crtc_needs_modeset(crtc_state) ||
> -		    intel_crtc_needs_fastset(crtc_state)) {
> +		    intel_crtc_needs_fastset(crtc_state) ||
> +		    intel_casf_needs_scaler(crtc_state)) {
>   			ret = skl_update_scaler_crtc(crtc_state);
>   			if (ret)
>   				return ret;
> diff --git a/drivers/gpu/drm/i915/display/skl_scaler.c b/drivers/gpu/drm/i915/display/skl_scaler.c
> index 39fc537e54f0..d816dae9cec4 100644
> --- a/drivers/gpu/drm/i915/display/skl_scaler.c
> +++ b/drivers/gpu/drm/i915/display/skl_scaler.c
> @@ -5,6 +5,7 @@
>   
>   #include "i915_drv.h"
>   #include "i915_reg.h"
> +#include "intel_casf.h"
>   #include "intel_casf_regs.h"
>   #include "intel_de.h"
>   #include "intel_display_trace.h"
> @@ -272,7 +273,8 @@ int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state)
>   				 drm_rect_width(&crtc_state->pipe_src),
>   				 drm_rect_height(&crtc_state->pipe_src),
>   				 width, height, NULL, 0,
> -				 crtc_state->pch_pfit.enabled);
> +				 crtc_state->pch_pfit.enabled ||
> +				 intel_casf_needs_scaler(crtc_state));
>   }
>   
>   /**
> @@ -311,7 +313,9 @@ int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
>   }
>   
>   static int intel_allocate_scaler(struct intel_crtc_scaler_state *scaler_state,
> -				 struct intel_crtc *crtc)
> +				 struct intel_crtc *crtc,
> +				 struct intel_plane_state *plane_state,
> +				 bool casf_scaler)
>   {
>   	int i;
>   
> @@ -319,6 +323,10 @@ static int intel_allocate_scaler(struct intel_crtc_scaler_state *scaler_state,
>   		if (scaler_state->scalers[i].in_use)
>   			continue;
>   
> +		/* CASF needs second scaler */
> +		if (!plane_state && casf_scaler && i != 1)
> +			continue;
> +
>   		scaler_state->scalers[i].in_use = true;
>   
>   		return i;
> @@ -369,7 +377,7 @@ static int intel_atomic_setup_scaler(struct intel_crtc_state *crtc_state,
>   				     int num_scalers_need, struct intel_crtc *crtc,
>   				     const char *name, int idx,
>   				     struct intel_plane_state *plane_state,
> -				     int *scaler_id)
> +				     int *scaler_id, bool casf_scaler)
>   {
>   	struct intel_display *display = to_intel_display(crtc);
>   	struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
> @@ -378,7 +386,7 @@ static int intel_atomic_setup_scaler(struct intel_crtc_state *crtc_state,
>   	int vscale = 0;
>   
>   	if (*scaler_id < 0)
> -		*scaler_id = intel_allocate_scaler(scaler_state, crtc);
> +		*scaler_id = intel_allocate_scaler(scaler_state, crtc, plane_state, casf_scaler);
>   
>   	if (drm_WARN(display->drm, *scaler_id < 0,
>   		     "Cannot find scaler for %s:%d\n", name, idx))
> @@ -510,10 +518,14 @@ static int setup_crtc_scaler(struct intel_atomic_state *state,
>   	struct intel_crtc_scaler_state *scaler_state =
>   		&crtc_state->scaler_state;
>   
> +	if (intel_casf_needs_scaler(crtc_state) && crtc_state->pch_pfit.enabled)
> +		return -EINVAL;
> +
>   	return intel_atomic_setup_scaler(crtc_state,
>   					 hweight32(scaler_state->scaler_users),
>   					 crtc, "CRTC", crtc->base.base.id,
> -					 NULL, &scaler_state->scaler_id);
> +					 NULL, &scaler_state->scaler_id,
> +					 intel_casf_needs_scaler(crtc_state));
>   }
>   
>   static int setup_plane_scaler(struct intel_atomic_state *state,
> @@ -548,7 +560,8 @@ static int setup_plane_scaler(struct intel_atomic_state *state,
>   	return intel_atomic_setup_scaler(crtc_state,
>   					 hweight32(scaler_state->scaler_users),
>   					 crtc, "PLANE", plane->base.base.id,
> -					 plane_state, &plane_state->scaler_id);
> +					 plane_state, &plane_state->scaler_id,
> +					 false);
>   }
>   
>   /**