Re: [PATCH 4/7] drm/i915/perf: lock powergating configuration to default when active

[Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>]

On 07/09/2018 10:23, Lionel Landwerlin wrote:
> On 07/09/2018 09:26, Tvrtko Ursulin wrote:
>>
>> On 06/09/2018 11:36, Lionel Landwerlin wrote:
>>> On 06/09/2018 11:22, Chris Wilson wrote:
>>>> Quoting Lionel Landwerlin (2018-09-06 11:18:01)
>>>>> On 06/09/2018 11:10, Chris Wilson wrote:
>>>>>> Quoting Lionel Landwerlin (2018-09-06 10:57:47)
>>>>>>> On 05/09/2018 15:22, Tvrtko Ursulin wrote:
>>>>>>>> From: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
>>>>>>>>
>>>>>>>> If some of the contexts submitting workloads to the GPU have been
>>>>>>>> configured to shutdown slices/subslices, we might loose the NOA
>>>>>>>> configurations written in the NOA muxes.
>>>>>>>>
>>>>>>>> One possible solution to this problem is to reprogram the NOA muxes
>>>>>>>> when we switch to a new context. We initially tried this in the
>>>>>>>> workaround batchbuffer but some concerns where raised about the 
>>>>>>>> cost
>>>>>>>> of reprogramming at every context switch. This solution is also not
>>>>>>>> without consequences from the userspace point of view. 
>>>>>>>> Reprogramming
>>>>>>>> of the muxes can only happen once the powergating configuration has
>>>>>>>> changed (which happens after context switch). This means for a 
>>>>>>>> window
>>>>>>>> of time during the recording, counters recorded by the OA unit 
>>>>>>>> might
>>>>>>>> be invalid. This requires userspace dealing with OA reports to 
>>>>>>>> discard
>>>>>>>> the invalid values.
>>>>>>>>
>>>>>>>> Minimizing the reprogramming could be implemented by tracking of 
>>>>>>>> the
>>>>>>>> last programmed configuration somewhere in GGTT and use 
>>>>>>>> MI_PREDICATE
>>>>>>>> to discard some of the programming commands, but the command 
>>>>>>>> streamer
>>>>>>>> would still have to parse all the MI_LRI instructions in the
>>>>>>>> workaround batchbuffer.
>>>>>>>>
>>>>>>>> Another solution, which this change implements, is to simply 
>>>>>>>> disregard
>>>>>>>> the user requested configuration for the period of time when 
>>>>>>>> i915/perf
>>>>>>>> is active. There is no known issue with this apart from a 
>>>>>>>> performance
>>>>>>>> penality for some media workloads that benefit from running on a
>>>>>>>> partially powergated GPU. We already prevent RC6 from affecting the
>>>>>>>> programming so it doesn't sound completely unreasonable to hold on
>>>>>>>> powergating for the same reason.
>>>>>>>>
>>>>>>>> v2: Leave RPCS programming in intel_lrc.c (Lionel)
>>>>>>>>
>>>>>>>> v3: Update for s/union intel_sseu/struct intel_sseu/ (Lionel)
>>>>>>>>        More to_intel_context() (Tvrtko)
>>>>>>>>        s/dev_priv/i915/ (Tvrtko)
>>>>>>>>
>>>>>>>> Tvrtko Ursulin:
>>>>>>>>
>>>>>>>> v4:
>>>>>>>>     * Rebase for make_rpcs changes.
>>>>>>>>
>>>>>>>> v5:
>>>>>>>>     * Apply OA restriction from make_rpcs directly.
>>>>>>>>
>>>>>>>> v6:
>>>>>>>>     * Rebase for context image setup changes.
>>>>>>>>
>>>>>>>> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
>>>>>>>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>>>>>>> ---
>>>>>>>>     drivers/gpu/drm/i915/i915_perf.c |  5 +++++
>>>>>>>>     drivers/gpu/drm/i915/intel_lrc.c | 30 
>>>>>>>> ++++++++++++++++++++----------
>>>>>>>>     drivers/gpu/drm/i915/intel_lrc.h |  3 +++
>>>>>>>>     3 files changed, 28 insertions(+), 10 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/gpu/drm/i915/i915_perf.c 
>>>>>>>> b/drivers/gpu/drm/i915/i915_perf.c
>>>>>>>> index ccb20230df2c..dd65b72bddd4 100644
>>>>>>>> --- a/drivers/gpu/drm/i915/i915_perf.c
>>>>>>>> +++ b/drivers/gpu/drm/i915/i915_perf.c
>>>>>>>> @@ -1677,6 +1677,11 @@ static void 
>>>>>>>> gen8_update_reg_state_unlocked(struct i915_gem_context *ctx,
>>>>>>>>                 CTX_REG(reg_state, state_offset, flex_regs[i], 
>>>>>>>> value);
>>>>>>>>         }
>>>>>>>> +
>>>>>>>> +     CTX_REG(reg_state, CTX_R_PWR_CLK_STATE, GEN8_R_PWR_CLK_STATE,
>>>>>>>> +             gen8_make_rpcs(dev_priv,
>>>>>>>> + &to_intel_context(ctx,
>>>>>>>> + dev_priv->engine[RCS])->sseu));
>>>>>>> I think there is one issue I missed on the previous iterations of 
>>>>>>> this
>>>>>>> patch.
>>>>>>>
>>>>>>> This gen8_update_reg_state_unlocked() is called when the GPU is 
>>>>>>> parked
>>>>>>> on the kernel context.
>>>>>>>
>>>>>>> It's supposed to update all contexts, but I think we might not be 
>>>>>>> able
>>>>>>> to update the kernel context image while the GPU is using it.
>>>>>> The kernel context is only ever taken in extremis (you are either
>>>>>> parking or stalling userspace) so I don't care.
>>>>>
>>>>> The patch exposing the RPCS configuration to userspace will make 
>>>>> use of
>>>>> the kernel context while OA/perf is enabled. Even if it reprograms the
>>>>> locked value that will break the power configuration stability on 
>>>>> Gen11
>>>>> (because the locked configuration will be different from the kernel
>>>>> context configuration).
>>>> Sure, but as you point out that's only on changing configuration.
>>>>
>>>> What's missing in the patch is that we only bail early if the new sseu
>>>> matches the ce->sseu, but that doesn't necessarily match whats in the
>>>> context due to OA. (Or maybe I missed the conversion to rpcs value and
>>>> checking.)
>>>> -Chris
>>>>
>>>
>>> Yep, because the gen8_make_rpcs() post processes the values store at 
>>> the gem context level, we risk rerunning the kernel context to write 
>>> the exiting value.
>>> Sorry this is all so messy :(
>>
>> Lets see if I managed to follow here.
>>
>> The current code indeed bails out at the set ctx param level if the 
>> requested state matches the ce->state. My thinking was that ce->state 
>> is the master state and whatever happens in "post processing" via 
>> gen8_make_rpcs should be hidden from it since the design is that the 
>> i915_perf.c will re-configure all contexts when the OA active status 
>> changes (to either direction).
>>
>> So I don't see a problem in those two interactions.
> 
> 
> Let's say you have contextA with sseu(slice,subslice)=(0x1/0xff) for ICL.
> 
> You then enable OA which locks the configuration at (0x1,0xf).
> 
> The kernel context has retained its (0x1/0xff) configuration.
> 
> 
> And after you change the config of contextA to (0x1,0x7).
> 
> 
> This would lead to the kernel context scheduled with (0x1,0xff) while OA 
> is active.

Okay that's a problem discussed in the paragraph below - that the kernel 
context is not updated at all. But is it a problem for OA? Will it mess 
up some counters even if kernel context isn't executing anything 
interacting with them? Or is it?

> 
>>
>> Apart from one, get_param_sseu will lie a bit - we can discuss about 
>> this one more. At one point I suggested we have two sets of masks in 
>> the uAPI, requested and active in a way. So userspace could query what 
>> it set and what is actually active.
>>
>> Now second issue is if i915_perf.c is able to reprogram the kernel 
>> config.
>>
>> Here its true, it will write to the context image and that will get 
>> overwritten by context save.
>>
>> If that is a problem for OA, I was initially if a throw-away second 
>> "kernel" context could be use to re-program the real one, but perhaps 
>> even simpler - what about a mmio write to program the RPCS while 
>> kernel context is active?
> 
> 
> Documentation says : "This register must not be programmed directly 
> through CPU MMIO cycle."
> 
> 
> Sorry :(

Ugh.. okay, help me understand if kernel context absolutely needs to 
follow the "lock" for OA to work and then we'll see what to do.

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx