Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Mika Kahola <mika.kahola@intel.com>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t v2] tests/kms_atomic_allow_modeset: Add DRM_MODE_ATOMIC_ALLOW_MODESET test
Date: Tue, 4 Apr 2017 14:28:15 +0200	[thread overview]
Message-ID: <6f274efc-2b6e-273b-3e4e-9a0245c5264e@linux.intel.com> (raw)
In-Reply-To: <1491307160-16624-1-git-send-email-mika.kahola@intel.com>

Hey,

Op 04-04-17 om 13:59 schreef Mika Kahola:
> When doing a full atomic modeset, kernel should fail if the flag
> DRM_MODE_ATOMIC_ALLOW_MODESET is not set. Let's add this test as part of
> Intel-GPU-Tools. The test procedure is the following:
>
> - Try to do atomic commit without DRM_MODE_ATOMIC_ALLOW_MODESET flag.
>   Kernel should reject this request.
> - Do full modeset
> - Enable DRM_MODE_ATOMIC_ALLOW_MODESET and try to do atmic commit.
>   Kernel should now allow atomic modeset.
>
> For: VIZ-6955
>
> Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> ---
>  tests/Makefile.sources           |   1 +
>  tests/kms_atomic_allow_modeset.c | 133 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 134 insertions(+)
>  create mode 100644 tests/kms_atomic_allow_modeset.c
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index 45c21a0..d3ee629 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -94,6 +94,7 @@ TESTS_progs_M = \
>  	kms_addfb_basic \
>  	kms_atomic \
>  	kms_atomic_transition \
> +	kms_atomic_allow_modeset \
>  	kms_busy \
>  	kms_ccs \
>  	kms_chv_cursor_fail \
> diff --git a/tests/kms_atomic_allow_modeset.c b/tests/kms_atomic_allow_modeset.c
> new file mode 100644
> index 0000000..b4d8c16
> --- /dev/null
> +++ b/tests/kms_atomic_allow_modeset.c
> @@ -0,0 +1,133 @@
> +/*
> + * Copyright © 2017 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include "igt.h"
> +
> +IGT_TEST_DESCRIPTION("Test that kernel rejects atomic modeset if ALLOW_MODESET flag is not set");
> +
> +static void
> +test_init(igt_display_t *display, struct igt_fb *fb, igt_output_t *output)
> +{
> +	drmModeModeInfo *mode;
> +	igt_plane_t *primary;
> +	int id;
> +
> +	mode = igt_output_get_mode(output);
> +
> +	id = igt_create_pattern_fb(display->drm_fd,
> +				   mode->hdisplay, mode->vdisplay,
> +				   DRM_FORMAT_XRGB8888,
> +				   LOCAL_I915_FORMAT_MOD_X_TILED,
> +				   fb);
> +	igt_assert(id);
> +
> +	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> +	igt_plane_set_fb(primary, fb);
> +}
> +
> +static void
> +test_finish(igt_display_t *display, struct igt_fb *fb, igt_output_t *output)
> +{
> +	igt_plane_t *primary;
> +
> +	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> +
> +	igt_remove_fb(display->drm_fd, fb);
> +
> +	igt_plane_set_fb(primary, NULL);
> +	igt_output_set_pipe(output, PIPE_ANY);
> +
> +	igt_display_commit2(display, COMMIT_ATOMIC);
> +}
> +
> +static void
> +test_allow_modeset(igt_display_t *display, enum pipe pipe, igt_output_t *output)
> +{
> +	struct igt_fb fb;
> +	int flags = DRM_MODE_ATOMIC_NONBLOCK;
> +	int ret;
> +
> +	igt_output_set_pipe(output, pipe);
> +
> +	test_init(display, &fb, output);
> +
> +	/*
> +	 * Try to do atomic commit without DRM_MODE_ATOMIC_ALLOW_MODESET flag.
> +	 * Kernel should reject this request.
> +	 */
> +	ret = igt_display_try_commit_atomic(display, flags, NULL);
> +	igt_assert_eq(ret, -EINVAL);
> +
> +	/* do modeset */
> +	igt_output_set_pipe(output, pipe);
> +
> +	/*
> +	 * Try to do atomic commit with DRM_MODE_ATOMIC_ALLOW_MODESET flag set.
> +	 * The kernel should now accept this request.
> +	 */
> +	flags |= DRM_MODE_ATOMIC_ALLOW_MODESET;
> +	ret = igt_display_try_commit_atomic(display, flags, NULL);
> +	igt_assert_eq(ret, 0);
> +
> +	test_finish(display, &fb, output);
> +}
> +
> +igt_simple_main
> +{
> +	igt_output_t *output;
> +	igt_display_t display;
> +	drmModeResPtr res;
> +	enum pipe pipe;
> +
> +	igt_skip_on_simulation();
> +
> +	igt_fixture {
> +		int valid_outputs = 0;
> +
> +		display.drm_fd = drm_open_driver_master(DRIVER_ANY);
> +		igt_enable_connectors();
> +		kmstest_set_vt_graphics_mode();
> +		igt_display_init(&display, display.drm_fd);
> +		igt_require(display.is_atomic);
> +
> +		for_each_pipe_with_valid_output(&display, pipe, output)
> +			valid_outputs++;
> +
> +		igt_require_f(valid_outputs, "no valid crtc/connector combinations found\n");
> +	}
> +
> +	res = drmModeGetResources(display.drm_fd);
> +	kmstest_unset_all_crtcs(display.drm_fd, res);
^Why is either needed? And why outside fixture?
> +
> +	for_each_pipe_with_valid_output(&display, pipe, output)
> +		test_allow_modeset(&display, pipe, output);
> +
> +	igt_fixture {
> +		igt_display_fini(&display);
> +		igt_reset_connectors();
> +		drmModeFreeResources(res);
> +	}
> +
> +	igt_exit();
> +}

This tests one source of allow_modeset. There are 2 more:
Changing only the active property, which is similar to toggling dpms.
Assigning a different connector to the current crtc

I think the active property should be tested too at least.

~Maarten

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-04-04 12:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-04 11:59 [PATCH i-g-t v2] tests/kms_atomic_allow_modeset: Add DRM_MODE_ATOMIC_ALLOW_MODESET test Mika Kahola
2017-04-04 12:28 ` Maarten Lankhorst [this message]
2017-04-05 10:02   ` Mika Kahola

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6f274efc-2b6e-273b-3e4e-9a0245c5264e@linux.intel.com \
    --to=maarten.lankhorst@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=mika.kahola@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox