Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Imre Deak <imre.deak@intel.com>,
	intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
	dri-devel@lists.freedesktop.org
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Subject: Re: [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required
Date: Thu, 05 Jun 2025 16:13:05 +0300	[thread overview]
Message-ID: <713c4febb0423cbeffe9bab0b9b171d52cf2c686@intel.com> (raw)
In-Reply-To: <20250605082850.65136-6-imre.deak@intel.com>

On Thu, 05 Jun 2025, Imre Deak <imre.deak@intel.com> wrote:
> Reading DPCD registers has side-effects and some of these can cause a
> problem for instance during link training. Based on this it's better to
> avoid the probing quirk done before each DPCD register read, limiting
> this to the monitor which requires it. The only known problematic
> monitor is an external SST sink, so keep the quirk disabled always for
> eDP and MST sinks. Reenable the quirk after a hotplug event and after
> resuming from a power state without hotplug support, until the
> subsequent EDID based detection.
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>

I'll get back to this tomorrow, don't have time now to check all the
paths now. At a glance looks okay.

BR,
Jani.

> ---
>  drivers/gpu/drm/i915/display/intel_dp.c      | 11 +++++++++--
>  drivers/gpu/drm/i915/display/intel_dp_aux.c  |  2 ++
>  drivers/gpu/drm/i915/display/intel_hotplug.c | 10 ++++++++++
>  3 files changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 208a953b04a2f..d65a18fc1aeb9 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5747,6 +5747,11 @@ intel_dp_set_edid(struct intel_dp *intel_dp)
>  	/* Below we depend on display info having been updated */
>  	drm_edid_connector_update(&connector->base, drm_edid);
>  
> +	if (!intel_dp_is_edp(intel_dp))
> +		drm_dp_dpcd_set_probe_quirk(&intel_dp->aux,
> +					    drm_edid_has_quirk(&connector->base,
> +							       DRM_EDID_QUIRK_DP_DPCD_PROBE));
> +
>  	vrr_capable = intel_vrr_is_capable(connector);
>  	drm_dbg_kms(display->drm, "[CONNECTOR:%d:%s] VRR capable: %s\n",
>  		    connector->base.base.id, connector->base.name, str_yes_no(vrr_capable));
> @@ -5881,6 +5886,7 @@ intel_dp_detect(struct drm_connector *_connector,
>  	intel_dp_print_rates(intel_dp);
>  
>  	if (intel_dp->is_mst) {
> +		drm_dp_dpcd_set_probe_quirk(&intel_dp->aux, false);
>  		/*
>  		 * If we are in MST mode then this connector
>  		 * won't appear connected or have anything
> @@ -6321,10 +6327,11 @@ intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd)
>  	 * complete the DP tunnel BW request for the latter connector/encoder
>  	 * waiting for this encoder's DPRX read, perform a dummy read here.
>  	 */
> -	if (long_hpd)
> +	if (long_hpd) {
> +		drm_dp_dpcd_set_probe_quirk(&intel_dp->aux, true);
> +
>  		intel_dp_read_dprx_caps(intel_dp, dpcd);
>  
> -	if (long_hpd) {
>  		intel_dp->reset_link_params = true;
>  		intel_dp_invalidate_source_oui(intel_dp);
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/i915/display/intel_dp_aux.c
> index bf8e8e0cc19c9..410252ba6fd16 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c
> @@ -835,6 +835,8 @@ void intel_dp_aux_init(struct intel_dp *intel_dp)
>  
>  	intel_dp->aux.transfer = intel_dp_aux_transfer;
>  	cpu_latency_qos_add_request(&intel_dp->pm_qos, PM_QOS_DEFAULT_VALUE);
> +
> +	drm_dp_dpcd_set_probe_quirk(&intel_dp->aux, !intel_dp_is_edp(intel_dp));
>  }
>  
>  static enum aux_ch default_aux_ch(struct intel_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c
> index 74fe398663d63..1093c6c3714c0 100644
> --- a/drivers/gpu/drm/i915/display/intel_hotplug.c
> +++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
> @@ -33,6 +33,7 @@
>  #include "intel_display_core.h"
>  #include "intel_display_rpm.h"
>  #include "intel_display_types.h"
> +#include "intel_dp.h"
>  #include "intel_hdcp.h"
>  #include "intel_hotplug.h"
>  #include "intel_hotplug_irq.h"
> @@ -906,9 +907,18 @@ void intel_hpd_poll_enable(struct intel_display *display)
>   */
>  void intel_hpd_poll_disable(struct intel_display *display)
>  {
> +	struct intel_encoder *encoder;
> +
>  	if (!HAS_DISPLAY(display))
>  		return;
>  
> +	for_each_intel_dp(display->drm, encoder) {
> +		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> +
> +		if (!intel_dp_is_edp(intel_dp))
> +			drm_dp_dpcd_set_probe_quirk(&intel_dp->aux, true);
> +	}
> +
>  	WRITE_ONCE(display->hotplug.poll_enabled, false);
>  
>  	spin_lock_irq(&display->irq.lock);

-- 
Jani Nikula, Intel

  reply	other threads:[~2025-06-05 13:13 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-05  8:28 [PATCH v3 0/5] drm/dp: Limit the DPCD probe quirk to the affected monitor Imre Deak
2025-06-05  8:28 ` [PATCH v3 1/5] drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS Imre Deak
2025-06-05  8:28 ` [PATCH v3 2/5] drm/edid: Define the quirks in an enum list Imre Deak
2025-06-05 13:05   ` Jani Nikula
2025-06-05 13:06   ` Jani Nikula
2025-06-05  8:28 ` [PATCH v3 3/5] drm/edid: Add support for quirks visible to DRM core and drivers Imre Deak
2025-06-05 13:07   ` Jani Nikula
2025-06-05 13:23     ` Imre Deak
2025-06-05  8:28 ` [PATCH v3 4/5] drm/dp: Add an EDID quirk for the DPCD register access probe Imre Deak
2025-06-05 13:11   ` Jani Nikula
2025-06-05 13:33     ` Imre Deak
2025-06-09 12:55   ` [PATCH v4 " Imre Deak
2025-06-05  8:28 ` [PATCH v3 5/5] drm/i915/dp: Disable the AUX DPCD probe quirk if it's not required Imre Deak
2025-06-05 13:13   ` Jani Nikula [this message]
2025-06-06 13:44   ` Jani Nikula
2025-06-06 13:50     ` Imre Deak
2025-06-06 13:55       ` Imre Deak
2025-06-06 14:04         ` Jani Nikula
2025-06-06 14:34           ` Imre Deak
2025-06-09 12:55   ` [PATCH v4 " Imre Deak
2025-06-10 13:39     ` Kahola, Mika
2025-06-11 13:06       ` Jani Nikula
2025-06-05  9:05 ` ✗ Fi.CI.CHECKPATCH: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev4) Patchwork
2025-06-05  9:06 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-06-05  9:28 ` ✓ i915.CI.BAT: success " Patchwork
2025-06-05 11:07 ` ✗ i915.CI.Full: failure " Patchwork
2025-06-09 13:47 ` ✗ Fi.CI.CHECKPATCH: warning for drm/dp: Limit the DPCD probe quirk to the affected monitor (rev6) Patchwork
2025-06-09 13:47 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-06-09 14:09 ` ✓ i915.CI.BAT: success " Patchwork
2025-06-09 18:17 ` ✗ i915.CI.Full: failure " Patchwork
2025-06-10 15:42 ` [PATCH v3 0/5] drm/dp: Limit the DPCD probe quirk to the affected monitor Imre Deak
2025-06-12 13:29   ` Imre Deak
2025-06-12 13:54     ` Thomas Zimmermann
2025-06-12 17:56       ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=713c4febb0423cbeffe9bab0b9b171d52cf2c686@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox