Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Gupta, Anshuman" <anshuman.gupta@intel.com>
To: "Li, Juston" <juston.li@intel.com>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>
Cc: "seanpaul@chromium.org" <seanpaul@chromium.org>
Subject: Re: [Intel-gfx] [PATCH 1/3] drm/i915/hdcp: update cp_irq_count_cached in intel_dp_hdcp2_read_msg()
Date: Wed, 27 Jan 2021 05:01:43 +0000	[thread overview]
Message-ID: <77908242abb444678b0f29a1356f3084@intel.com> (raw)
In-Reply-To: <20210126200805.2499944-1-juston.li@intel.com>

Build is failing .
Please send patches again after fixing it.

> -----Original Message-----
> From: Li, Juston <juston.li@intel.com>
> Sent: Wednesday, January 27, 2021 1:38 AM
> To: intel-gfx@lists.freedesktop.org
> Cc: seanpaul@chromium.org; Gupta, Anshuman
> <anshuman.gupta@intel.com>; C, Ramalingam <ramalingam.c@intel.com>;
> Li, Juston <juston.li@intel.com>
> Subject: [PATCH 1/3] drm/i915/hdcp: update cp_irq_count_cached in
> intel_dp_hdcp2_read_msg()
> 
> Update cp_irq_count_cached when we handle reading the messages rather
> than writing a message to make sure the value is up to date and not stale
> from a previously handled CP_IRQ. AKE flow  doesn't always respond to a
> read with a write msg.
> 
> E.g. currently AKE_Send_Pairing_Info will "timeout" because we received a
> CP_IRQ for reading AKE_Send_H_Prime but no write occurred between that
> and reading AKE_Send_Pairing_Info so cp_irq_count_cached is stale
> causing the wait to return right away rather than waiting for a new CP_IRQ.
> 
> Signed-off-by: Juston Li <juston.li@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> index f372e25edab4..56a1a0ed20fe 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> @@ -442,8 +442,6 @@ static
>  int intel_dp_hdcp2_write_msg(struct intel_digital_port *dig_port,
>  			     void *buf, size_t size)
>  {
> -	struct intel_dp *dp = &dig_port->dp;
> -	struct intel_hdcp *hdcp = &dp->attached_connector->hdcp;
>  	unsigned int offset;
>  	u8 *byte = buf;
>  	ssize_t ret, bytes_to_write, len;
> @@ -459,8 +457,6 @@ int intel_dp_hdcp2_write_msg(struct
> intel_digital_port *dig_port,
>  	bytes_to_write = size - 1;
>  	byte++;
> 
> -	hdcp->cp_irq_count_cached = atomic_read(&hdcp->cp_irq_count);
> -
>  	while (bytes_to_write) {
>  		len = bytes_to_write > DP_AUX_MAX_PAYLOAD_BYTES ?
>  				DP_AUX_MAX_PAYLOAD_BYTES :
> bytes_to_write; @@ -508,6 +504,8 @@ static  int
> intel_dp_hdcp2_read_msg(struct intel_digital_port *dig_port,
>  			    u8 msg_id, void *buf, size_t size)  {
> +	struct intel_dp *dp = &dig_port->dp;
> +	struct intel_hdcp *hdcp = &dp->attached_connector->hdcp;
>  	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
>  	unsigned int offset;
>  	u8 *byte = buf;
> @@ -523,6 +521,8 @@ int intel_dp_hdcp2_read_msg(struct
> intel_digital_port *dig_port,
>  	if (ret < 0)
>  		return ret;
> 
> +	hdcp->cp_irq_count_cached = atomic_read(&hdcp->cp_irq_count);
> +
>  	if (msg_id == HDCP_2_2_REP_SEND_RECVID_LIST) {
>  		ret = get_receiver_id_list_size(dig_port);
>  		if (ret < 0)
> --
> 2.29.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2021-01-27  5:02 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-26 20:08 [Intel-gfx] [PATCH 1/3] drm/i915/hdcp: update cp_irq_count_cached in intel_dp_hdcp2_read_msg() Juston Li
2021-01-26 20:08 ` [Intel-gfx] [PATCH 2/3] drm/i915/hdcp: read RxInfo once when reading Send_Pairing_Info Juston Li
2021-01-26 20:08 ` [Intel-gfx] [PATCH 3/3] drm/i915/hdcp: disable the QSES check for HDCP2.2 over MST Juston Li
2021-01-27  7:39   ` kernel test robot
2021-01-27 23:54   ` kernel test robot
2021-01-26 20:49 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for series starting with [1/3] drm/i915/hdcp: update cp_irq_count_cached in intel_dp_hdcp2_read_msg() Patchwork
2021-01-27  5:01 ` Gupta, Anshuman [this message]
  -- strict thread matches above, loose matches on Subject: below --
2021-08-10 21:58 [Intel-gfx] [PATCH 0/3] drm/i915/hdcp: HDCP2.2 MST dock fixes Juston Li
2021-08-10 21:58 ` [Intel-gfx] [PATCH 1/3] drm/i915/hdcp: update cp_irq_count_cached in intel_dp_hdcp2_read_msg() Juston Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=77908242abb444678b0f29a1356f3084@intel.com \
    --to=anshuman.gupta@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=juston.li@intel.com \
    --cc=seanpaul@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox