Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2] drm/i915: Keep the forcewake timer alive for 1ms past the most recent use
Date: Mon, 15 May 2017 14:20:24 +0300	[thread overview]
Message-ID: <8737c6l62v.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <20170512221641.2937-1-chris@chris-wilson.co.uk>

Chris Wilson <chris@chris-wilson.co.uk> writes:

> Currently the timer is armed for 1ms after the first use and is killed
> immediately, dropping the forcewake as early as possible. However, for
> very frequent operations the forcewake dance has a large impact on
> latency and keeping the timer alive until we are idle is preferred. To
> achieve this, if we call intel_uncore_forcewake_get whilst the timer is
> alive (repeated use), then set a flag to restart the timer on expiry
> rather than drop the forcewake usage count. The timer is racy, the
> consequence of the race is to expire the timer earlier than is now
> desired but does not impact on correct behaviour. The offset the race
> slightly, we set the active flag again on intel_uncore_forcewake_put.
>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_uncore.c | 15 ++++++++++++---
>  drivers/gpu/drm/i915/intel_uncore.h |  1 +
>  2 files changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
> index 7eaa592aed26..2fd0989805eb 100644
> --- a/drivers/gpu/drm/i915/intel_uncore.c
> +++ b/drivers/gpu/drm/i915/intel_uncore.c
> @@ -216,6 +216,9 @@ intel_uncore_fw_release_timer(struct hrtimer *timer)
>  
>  	assert_rpm_device_not_suspended(dev_priv);
>  
> +	if (xchg(&domain->active, false))
> +		return HRTIMER_RESTART;
> +
>  	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
>  	if (WARN_ON(domain->wake_count == 0))
>  		domain->wake_count++;
> @@ -246,6 +249,7 @@ static void intel_uncore_forcewake_reset(struct drm_i915_private *dev_priv,
>  		active_domains = 0;
>  
>  		for_each_fw_domain(domain, dev_priv, tmp) {
> +			smp_store_mb(domain->active, false);
>  			if (hrtimer_cancel(&domain->timer) == 0)
>  				continue;
>  
> @@ -453,9 +457,12 @@ static void __intel_uncore_forcewake_get(struct drm_i915_private *dev_priv,
>  
>  	fw_domains &= dev_priv->uncore.fw_domains;
>  
> -	for_each_fw_domain_masked(domain, fw_domains, dev_priv, tmp)
> -		if (domain->wake_count++)
> +	for_each_fw_domain_masked(domain, fw_domains, dev_priv, tmp) {
> +		if (domain->wake_count++) {
>  			fw_domains &= ~domain->mask;
> +			domain->active = true;
> +		}
> +	}
>  
>  	if (fw_domains)
>  		dev_priv->uncore.funcs.force_wake_get(dev_priv, fw_domains);
> @@ -520,8 +527,10 @@ static void __intel_uncore_forcewake_put(struct drm_i915_private *dev_priv,
>  		if (WARN_ON(domain->wake_count == 0))
>  			continue;
>  
> -		if (--domain->wake_count)
> +		if (--domain->wake_count) {
> +			domain->active = true;

We dont wan't to set the active here for all domains that
are going to power off, and delay their release for one timer tick
to optimistically wait for next user?

-Mika

>  			continue;
> +		}
>  
>  		fw_domain_arm_timer(domain);
>  	}
> diff --git a/drivers/gpu/drm/i915/intel_uncore.h b/drivers/gpu/drm/i915/intel_uncore.h
> index 5fec5fd4346c..dfead585835c 100644
> --- a/drivers/gpu/drm/i915/intel_uncore.h
> +++ b/drivers/gpu/drm/i915/intel_uncore.h
> @@ -95,6 +95,7 @@ struct intel_uncore {
>  	struct intel_uncore_forcewake_domain {
>  		unsigned int mask;
>  		unsigned int wake_count;
> +		bool active;
>  		struct hrtimer timer;
>  		i915_reg_t reg_set;
>  		i915_reg_t reg_ack;
> -- 
> 2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2017-05-15 11:21 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-12 13:53 [PATCH 1/2] drm/i915: Compute the fw_domain id from the mask Chris Wilson
2017-05-12 13:53 ` [PATCH 2/2] drm/i915: Keep the forcewake timer alive for 1ms past the most recent use Chris Wilson
2017-05-12 22:16   ` [PATCH v2] " Chris Wilson
2017-05-15 10:14     ` Tvrtko Ursulin
2017-05-15 10:41       ` Chris Wilson
2017-05-15 12:06         ` Tvrtko Ursulin
2017-05-15 12:35           ` Chris Wilson
2017-05-22  8:03             ` Tvrtko Ursulin
2017-05-15 11:20     ` Mika Kuoppala [this message]
2017-05-15 12:02       ` Chris Wilson
2017-05-12 14:39 ` ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Compute the fw_domain id from the mask Patchwork
2017-05-12 22:46 ` ✗ Fi.CI.BAT: warning for series starting with [1/2] drm/i915: Compute the fw_domain id from the mask (rev2) Patchwork
2017-05-15 10:18 ` [PATCH 1/2] drm/i915: Compute the fw_domain id from the mask Tvrtko Ursulin
2017-05-15 10:45   ` Chris Wilson
2017-05-22  8:00     ` Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8737c6l62v.fsf@gaia.fi.intel.com \
    --to=mika.kuoppala@linux.intel.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox