From: Jani Nikula <jani.nikula@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>,
Tvrtko Ursulin <tursulin@ursulin.net>,
Intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Skip logging impossible slices
Date: Wed, 21 Mar 2018 14:16:37 +0200 [thread overview]
Message-ID: <87605pk4ii.fsf@intel.com> (raw)
In-Reply-To: <152163324447.4865.17287933310888830804@mail.alporthouse.com>
On Wed, 21 Mar 2018, Chris Wilson <chris@chris-wilson.co.uk> wrote:
> Quoting Jani Nikula (2018-03-21 11:47:06)
>>
>> On Wed, 21 Mar 2018, Chris Wilson <chris@chris-wilson.co.uk> wrote:
>> > Quoting Chris Wilson (2018-03-21 10:41:37)
>> >> Quoting Tvrtko Ursulin (2018-03-21 10:32:28)
>> >> > From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>> >> >
>> >> > Log up to sseu->max_slices instead basing on ARRAY_SIZE since to avoid
>> >> > printing impossible and empty slices for a platform.
>> >> >
>> >> > Also compact slice total and slice mask into one log line.
>> >> >
>> >> > Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>> >> > Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
>> >> > ---
>> >> > drivers/gpu/drm/i915/intel_device_info.c | 8 ++++----
>> >> > 1 file changed, 4 insertions(+), 4 deletions(-)
>> >> >
>> >> > diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
>> >> > index 4babfc6ee45b..68aa9746d0e1 100644
>> >> > --- a/drivers/gpu/drm/i915/intel_device_info.c
>> >> > +++ b/drivers/gpu/drm/i915/intel_device_info.c
>> >> > @@ -83,11 +83,11 @@ static void sseu_dump(const struct sseu_dev_info *sseu, struct drm_printer *p)
>> >> > {
>> >> > int s;
>> >> >
>> >> > - drm_printf(p, "slice mask: %04x\n", sseu->slice_mask);
>> >> > - drm_printf(p, "slice total: %u\n", hweight8(sseu->slice_mask));
>> >> > + drm_printf(p, "slice total: %u, mask=%04x\n",
>> >> > + hweight8(sseu->slice_mask), sseu->slice_mask);
>> >> > drm_printf(p, "subslice total: %u\n", sseu_subslice_total(sseu));
>> >> > - for (s = 0; s < ARRAY_SIZE(sseu->subslice_mask); s++) {
>> >> > - drm_printf(p, "slice%d %u subslices mask=%04x\n",
>> >> > + for (s = 0; s < sseu->max_slices; s++) {
>> >> > + drm_printf(p, "slice%d: %u subslices, mask=%04x\n",
>> >> > s, hweight8(sseu->subslice_mask[s]),
>> >> > sseu->subslice_mask[s]);
>> >>
>> >> Just idly testing the waters...
>> >>
>> >> In yaml, this would be
>> >> "<indent>- slice%d: { subslices: %u, mask: 0x%04x }\n"
>> >
>> > Or if we keep the node name the same for easier parsing:
>> >
>> > "<indent>- slice: { id:%u, subslices:%u, mask:0x%04x }\n"
>>
>> I'm not against doing this, especially for gpu dumps.
>>
>> Wouldn't json be easier to generate and parse? Or do you prefer the
>> slightly better human readability of yaml?
>
> I think for any of the debug output preferring to keep it as readable as
> possible is essential. libyaml isn't that hard to use, even for a
> beginner like myself.
Fair enough; I'm only familiar with json, and that's my natural reason
to lean towards it.
>> I think it would be pretty straighforward to write drm printer helpers
>> for printing valid json without having to actually manually print the
>> colons and braces etc. And the struct drm_printer could even have checks
>> for ensuring you don't burp verbatim stuff to a printer that's supposed
>> to be json.
>
> About the biggest challenge is tracking indent; which drm_printer
> already does iirc. Still, I think we want to move this into lib/
I agree having this in lib is preferrable. But apparently that requires
moving the whole abstracted drm_printer style printing there first, and
then hoping to get yaml/json added on top. There's bound to be some
friction there.
>> Any considerations for the transition? Massive wholesale patch bomb
>> conversion? Yikes.
>
> I think it's only worth converting bits and pieces that we are trying to
> parse. So quite a few debugfs are candidates, and the error-state being
> a prime example as we want to make it more amenable and flexible for
> future post-mortem capture depending on what userspace needs. (I might
> even go as far as all future debugfs should come with a parser for igt.)
Oh, I did mean mass conversion on a per-debugfs-file basis, i.e. error
state in one go. But I guess there's no way around that, anything else
is just pain spread over a longer period.
I'd definitely go as far as saying any debugfs file that's supposed to
be in a serialized format should have a corresponding parser in igt, and
written *before* merging the kernel change.
There's also some discipline required wrt backward/forward compatibility
to actually reap the benefits of the format. Can't just change the
contents nilly willy with that either. It's not a magic bullet.
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-03-21 12:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-21 10:32 [PATCH] drm/i915: Skip logging impossible slices Tvrtko Ursulin
2018-03-21 10:41 ` Chris Wilson
2018-03-21 10:56 ` Chris Wilson
2018-03-21 11:47 ` Jani Nikula
2018-03-21 11:54 ` Chris Wilson
2018-03-21 12:16 ` Jani Nikula [this message]
2018-03-23 12:29 ` Joonas Lahtinen
2018-03-23 12:38 ` Chris Wilson
2018-03-21 10:52 ` Lionel Landwerlin
2018-03-21 11:21 ` ✓ Fi.CI.BAT: success for " Patchwork
2018-03-21 12:25 ` ✗ Fi.CI.IGT: warning " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87605pk4ii.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=Intel-gfx@lists.freedesktop.org \
--cc=chris@chris-wilson.co.uk \
--cc=tursulin@ursulin.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox