From: Jani Nikula <jani.nikula@intel.com>
To: Daniel Vetter <daniel@ffwll.ch>, Thomas Wood <thomas.wood@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH i-g-t] tools: print a warning for tools replaced by intel_reg
Date: Mon, 15 Jun 2015 18:51:27 +0300 [thread overview]
Message-ID: <87616p55s0.fsf@intel.com> (raw)
In-Reply-To: <20150615155144.GB23637@phenom.ffwll.local>
On Mon, 15 Jun 2015, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Wed, Jun 10, 2015 at 11:41:03AM +0100, Thomas Wood wrote:
>> Cc: Jani Nikula <jani.nikula@intel.com>
>> Signed-off-by: Thomas Wood <thomas.wood@intel.com>
>
> I'd go even one step further and do an exec using the corresponding
> intel_reg commandline. On top of this patch ofc.
IMO more work than it's worth.
> Then we could nuke a lot of the existing boilerplate already and then
> perhaps nuke all the tools one release later on or so.
Hmm didn't we already make a release with the warnings? I'd just nuke
the deprecated ones from git now.
BR,
Jani.
> -Daniel
>
>> ---
>> tools/intel_iosf_sb_read.c | 3 +++
>> tools/intel_iosf_sb_write.c | 3 +++
>> tools/intel_reg_dumper.c | 3 +++
>> tools/intel_reg_read.c | 3 +++
>> tools/intel_reg_snapshot.c | 4 ++++
>> tools/intel_reg_write.c | 3 +++
>> tools/intel_vga_read.c | 3 +++
>> tools/intel_vga_write.c | 3 +++
>> 8 files changed, 25 insertions(+)
>>
>> diff --git a/tools/intel_iosf_sb_read.c b/tools/intel_iosf_sb_read.c
>> index f188cda..097b0b8 100644
>> --- a/tools/intel_iosf_sb_read.c
>> +++ b/tools/intel_iosf_sb_read.c
>> @@ -94,6 +94,9 @@ int main(int argc, char *argv[])
>> int i, nregs, count = 1, reg_stride;
>> const char *name;
>>
>> + fprintf(stderr, "WARNING: Use of %s has been deprecated and replaced by"
>> + " intel_reg.\n", argv[0]);
>> +
>> if (!IS_VALLEYVIEW(dev->device_id) &&
>> !IS_CHERRYVIEW(dev->device_id)) {
>> usage(argv[0]);
>> diff --git a/tools/intel_iosf_sb_write.c b/tools/intel_iosf_sb_write.c
>> index eb6700d..a091a0d 100644
>> --- a/tools/intel_iosf_sb_write.c
>> +++ b/tools/intel_iosf_sb_write.c
>> @@ -89,6 +89,9 @@ int main(int argc, char** argv)
>> int i, nregs;
>> const char *name;
>>
>> + fprintf(stderr, "WARNING: Use of %s has been deprecated and replaced by"
>> + " intel_reg.\n", argv[0]);
>> +
>> if (!IS_VALLEYVIEW(dev->device_id) &&
>> !IS_CHERRYVIEW(dev->device_id)) {
>> usage(argv[0]);
>> diff --git a/tools/intel_reg_dumper.c b/tools/intel_reg_dumper.c
>> index 3d32005..f9b4d06 100644
>> --- a/tools/intel_reg_dumper.c
>> +++ b/tools/intel_reg_dumper.c
>> @@ -2931,6 +2931,9 @@ int main(int argc, char** argv)
>> char *file = NULL, *reg_name = NULL;
>> uint32_t reg_val, power_well;
>>
>> + fprintf(stderr, "WARNING: Use of %s has been deprecated and replaced by"
>> + " intel_reg.\n", argv[0]);
>> +
>> while ((opt = getopt(argc, argv, "d:h")) != -1) {
>> switch (opt) {
>> case 'd':
>> diff --git a/tools/intel_reg_read.c b/tools/intel_reg_read.c
>> index 46fa664..39671ff 100644
>> --- a/tools/intel_reg_read.c
>> +++ b/tools/intel_reg_read.c
>> @@ -74,6 +74,9 @@ int main(int argc, char** argv)
>> int decode_bits = 0;
>> int dwords = 1;
>>
>> + fprintf(stderr, "WARNING: Use of %s has been deprecated and replaced by"
>> + " intel_reg.\n", argv[0]);
>> +
>> while ((ch = getopt(argc, argv, "dfhc:")) != -1) {
>> switch(ch) {
>> case 'd':
>> diff --git a/tools/intel_reg_snapshot.c b/tools/intel_reg_snapshot.c
>> index 50dafd6..8b097e6 100644
>> --- a/tools/intel_reg_snapshot.c
>> +++ b/tools/intel_reg_snapshot.c
>> @@ -26,6 +26,7 @@
>>
>> #include <unistd.h>
>> #include <assert.h>
>> +#include <stdio.h>
>> #include "intel_io.h"
>> #include "intel_chipset.h"
>>
>> @@ -36,6 +37,9 @@ int main(int argc, char** argv)
>> int mmio_bar;
>> int ret;
>>
>> + fprintf(stderr, "WARNING: Use of %s has been deprecated and replaced by"
>> + " intel_reg.\n", argv[0]);
>> +
>> pci_dev = intel_get_pci_device();
>> devid = pci_dev->device_id;
>> intel_mmio_use_pci_bar(pci_dev);
>> diff --git a/tools/intel_reg_write.c b/tools/intel_reg_write.c
>> index b0ddffe..127519c 100644
>> --- a/tools/intel_reg_write.c
>> +++ b/tools/intel_reg_write.c
>> @@ -36,6 +36,9 @@ int main(int argc, char** argv)
>> {
>> uint32_t reg, value;
>>
>> + fprintf(stderr, "WARNING: Use of %s has been deprecated and replaced by"
>> + " intel_reg.\n", argv[0]);
>> +
>> if (argc < 3) {
>> printf("Usage: %s addr value\n", argv[0]);
>> printf(" WARNING: This is dangerous to you and your system's health.\n");
>> diff --git a/tools/intel_vga_read.c b/tools/intel_vga_read.c
>> index ea50705..8305fb8 100644
>> --- a/tools/intel_vga_read.c
>> +++ b/tools/intel_vga_read.c
>> @@ -57,6 +57,9 @@ int main(int argc, char *argv[])
>> int i, ch;
>> const char *cmdname = argv[0];
>>
>> + fprintf(stderr, "WARNING: Use of %s has been deprecated and replaced by"
>> + " intel_reg.\n", argv[0]);
>> +
>> while ((ch = getopt(argc, argv, "m")) != -1) {
>> switch(ch) {
>> case 'm':
>> diff --git a/tools/intel_vga_write.c b/tools/intel_vga_write.c
>> index 8215962..cb1ed98 100644
>> --- a/tools/intel_vga_write.c
>> +++ b/tools/intel_vga_write.c
>> @@ -57,6 +57,9 @@ int main(int argc, char *argv[])
>> int ch;
>> const char *cmdname = argv[0];
>>
>> + fprintf(stderr, "WARNING: Use of %s has been deprecated and replaced by"
>> + " intel_reg.\n", argv[0]);
>> +
>> while ((ch = getopt(argc, argv, "m")) != -1) {
>> switch(ch) {
>> case 'm':
>> --
>> 2.4.2
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-06-15 15:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-10 10:41 [PATCH i-g-t] tools: print a warning for tools replaced by intel_reg Thomas Wood
2015-06-15 15:51 ` Daniel Vetter
2015-06-15 15:51 ` Jani Nikula [this message]
2015-06-15 15:58 ` Thomas Wood
2015-06-15 16:12 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87616p55s0.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=thomas.wood@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox