From: Jani Nikula <jani.nikula@intel.com>
To: Mario Kleiner <mario.kleiner.de@gmail.com>,
intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH] drm/i915/dp: Add dpcd link_rate quirk for Apple 15" MBP 2017 (v3)
Date: Wed, 18 Mar 2020 21:18:15 +0200 [thread overview]
Message-ID: <87a74deako.fsf@intel.com> (raw)
In-Reply-To: <20200316042340.4783-1-mario.kleiner.de@gmail.com>
On Mon, 16 Mar 2020, Mario Kleiner <mario.kleiner.de@gmail.com> wrote:
> This fixes a problem found on the MacBookPro 2017 Retina panel.
>
> The panel reports 10 bpc color depth in its EDID, and the
> firmware chooses link settings at boot which support enough
> bandwidth for 10 bpc (324000 kbit/sec = multiplier 0xc),
> but the DP_MAX_LINK_RATE dpcd register only reports
> 2.7 Gbps (multiplier value 0xa) as possible, in direct
> contradiction of what the firmware successfully set up.
>
> This restricts the panel to 8 bpc, not providing the full
> color depth of the panel.
>
> This patch adds a quirk specific to the MBP 2017 15" Retina
> panel to add the additiional 324000 kbps link rate during
> edp setup.
>
> Link to previous discussion of a different attempted fix
> with Ville and Jani:
>
> https://patchwork.kernel.org/patch/11325935/
>
> v2: Follow Jani's proposal of defining quirk_rates[] instead
> of just appending 324000. This for better clarity.
>
> v3: Rebased onto current drm-tip, as of 16-March-2020. Adapt
> to new edid_quirks parameter of drm_dp_has_quirk().
>
> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
> Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
Pushed to drm-intel-next-queued, thanks for the patch.
BR,
Jani.
> ---
> drivers/gpu/drm/drm_dp_helper.c | 2 ++
> drivers/gpu/drm/i915/display/intel_dp.c | 11 +++++++++++
> include/drm/drm_dp_helper.h | 7 +++++++
> 3 files changed, 20 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index c6fbe6e6bc9d..8ba4531e808d 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -1238,6 +1238,8 @@ static const struct dpcd_quirk dpcd_quirk_list[] = {
> { OUI(0x00, 0x00, 0x00), DEVICE_ID('C', 'H', '7', '5', '1', '1'), false, BIT(DP_DPCD_QUIRK_NO_SINK_COUNT) },
> /* Synaptics DP1.4 MST hubs can support DSC without virtual DPCD */
> { OUI(0x90, 0xCC, 0x24), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) },
> + /* Apple MacBookPro 2017 15 inch eDP Retina panel reports too low DP_MAX_LINK_RATE */
> + { OUI(0x00, 0x10, 0xfa), DEVICE_ID(101, 68, 21, 101, 98, 97), false, BIT(DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS) },
> };
>
> #undef OUI
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 0a417cd2af2b..ef2e06e292d5 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -164,6 +164,17 @@ static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
> };
> int i, max_rate;
>
> + if (drm_dp_has_quirk(&intel_dp->desc, 0,
> + DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS)) {
> + /* Needed, e.g., for Apple MBP 2017, 15 inch eDP Retina panel */
> + static const int quirk_rates[] = { 162000, 270000, 324000 };
> +
> + memcpy(intel_dp->sink_rates, quirk_rates, sizeof(quirk_rates));
> + intel_dp->num_sink_rates = ARRAY_SIZE(quirk_rates);
> +
> + return;
> + }
> +
> max_rate = drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]);
>
> for (i = 0; i < ARRAY_SIZE(dp_rates); i++) {
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index c6119e4c169a..9d87cdf2740a 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1548,6 +1548,13 @@ enum drm_dp_quirk {
> * capabilities advertised.
> */
> DP_QUIRK_FORCE_DPCD_BACKLIGHT,
> + /**
> + * @DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS:
> + *
> + * The device supports a link rate of 3.24 Gbps (multiplier 0xc) despite
> + * the DP_MAX_LINK_RATE register reporting a lower max multiplier.
> + */
> + DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS,
> };
>
> /**
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2020-03-18 19:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-16 4:23 [Intel-gfx] [PATCH] drm/i915/dp: Add dpcd link_rate quirk for Apple 15" MBP 2017 (v3) Mario Kleiner
2020-03-16 18:10 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp: Add dpcd link_rate quirk for Apple 15" MBP 2017 (rev3) Patchwork
2020-03-16 18:35 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-03-17 3:03 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-03-18 19:18 ` Jani Nikula [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a74deako.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=mario.kleiner.de@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox