From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: Re: [PATCH] drm/i915: don't clear pfit at startup any more
Date: Wed, 20 Mar 2013 14:14:38 +0200 [thread overview]
Message-ID: <87boael13l.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <1363697778-18263-1-git-send-email-daniel.vetter@ffwll.ch>
Daniel Vetter <daniel.vetter@ffwll.ch> writes:
> Since
>
> commit 24a1f16de97c4cf0029d9acd04be06db32208726
> Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
> Date: Fri Feb 8 16:35:37 2013 +0200
>
> drm/i915: disable shared panel fitter for pipe
>
> We clear the single panel fitter when disabling the pipe it's attached to, so no
> need to additionally clear it when there's no lvds port detected. Since that
> alone isn't good enough e.g. when an external monitor is connected and the bios
> uses the panel fitter on that output.
>
> v2: Remove the now unused has_lvds variable and drop the bool return
> value from intel_lvds_init, both suggest by Mika Kuoppala.
>
> Cc: Mika Kuoppala <mika.kuoppala@intel.com>
> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 7 +------
> drivers/gpu/drm/i915/intel_drv.h | 2 +-
> drivers/gpu/drm/i915/intel_lvds.c | 20 ++++++++++----------
> 3 files changed, 12 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index f73fc3d..00f3d0b 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -8335,13 +8335,8 @@ static void intel_setup_outputs(struct drm_device *dev)
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_encoder *encoder;
> bool dpd_is_edp = false;
> - bool has_lvds;
>
> - has_lvds = intel_lvds_init(dev);
> - if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
> - /* disable the panel fitter on everything but LVDS */
> - I915_WRITE(PFIT_CONTROL, 0);
> - }
> + intel_lvds_init(dev);
>
> if (!(HAS_DDI(dev) && (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)))
> intel_crt_init(dev);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index e6f84d0..9e29223 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -459,7 +459,7 @@ extern void intel_tv_init(struct drm_device *dev);
> extern void intel_mark_busy(struct drm_device *dev);
> extern void intel_mark_fb_busy(struct drm_i915_gem_object *obj);
> extern void intel_mark_idle(struct drm_device *dev);
> -extern bool intel_lvds_init(struct drm_device *dev);
> +extern void intel_lvds_init(struct drm_device *dev);
> extern bool intel_is_dual_link_lvds(struct drm_device *dev);
> extern void intel_dp_init(struct drm_device *dev, int output_reg,
> enum port port);
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 6ff145f..5eb74de 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -1037,7 +1037,7 @@ static bool intel_lvds_supported(struct drm_device *dev)
> * Create the connector, register the LVDS DDC bus, and try to figure out what
> * modes we can display on the LVDS panel (if present).
> */
> -bool intel_lvds_init(struct drm_device *dev)
> +void intel_lvds_init(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_lvds_encoder *lvds_encoder;
> @@ -1055,35 +1055,35 @@ bool intel_lvds_init(struct drm_device *dev)
> u8 pin;
>
> if (!intel_lvds_supported(dev))
> - return false;
> + return;
>
> /* Skip init on machines we know falsely report LVDS */
> if (dmi_check_system(intel_no_lvds))
> - return false;
> + return;
>
> pin = GMBUS_PORT_PANEL;
> if (!lvds_is_present_in_vbt(dev, &pin)) {
> DRM_DEBUG_KMS("LVDS is not present in VBT\n");
> - return false;
> + return;
> }
>
> if (HAS_PCH_SPLIT(dev)) {
> if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
> - return false;
> + return;
> if (dev_priv->edp.support) {
> DRM_DEBUG_KMS("disable LVDS for eDP support\n");
> - return false;
> + return;
> }
> }
>
> lvds_encoder = kzalloc(sizeof(struct intel_lvds_encoder), GFP_KERNEL);
> if (!lvds_encoder)
> - return false;
> + return;
>
> lvds_connector = kzalloc(sizeof(struct intel_lvds_connector), GFP_KERNEL);
> if (!lvds_connector) {
> kfree(lvds_encoder);
> - return false;
> + return;
> }
>
> lvds_encoder->attached_connector = lvds_connector;
> @@ -1257,7 +1257,7 @@ out:
> intel_panel_init(&intel_connector->panel, fixed_mode);
> intel_panel_setup_backlight(connector);
>
> - return true;
> + return;
>
> failed:
> DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
> @@ -1267,5 +1267,5 @@ failed:
> drm_mode_destroy(dev, fixed_mode);
> kfree(lvds_encoder);
> kfree(lvds_connector);
> - return false;
> + return;
> }
> --
> 1.7.10.4
prev parent reply other threads:[~2013-03-20 12:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-06 13:55 [PATCH] drm/i915: don't clear pfit at startup any more Daniel Vetter
2013-03-19 9:53 ` Mika Kuoppala
2013-03-19 12:56 ` Daniel Vetter
2013-03-20 12:14 ` Mika Kuoppala [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87boael13l.fsf@gaia.fi.intel.com \
--to=mika.kuoppala@linux.intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox