From: "Dixit, Ashutosh" <ashutosh.dixit@intel.com>
To: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2 6/9] drm/i915/perf: Parse 64bit report header formats correctly
Date: Tue, 21 Feb 2023 14:14:35 -0800 [thread overview]
Message-ID: <87cz62br90.wl-ashutosh.dixit@intel.com> (raw)
In-Reply-To: <20230217005850.2511422-7-umesh.nerlige.ramappa@intel.com>
On Thu, 16 Feb 2023 16:58:47 -0800, Umesh Nerlige Ramappa wrote:
>
> Now that OA formats come in flavor of 64 bit reports, the report header
> has 64 bit report-id, timestamp, context-id and gpu-ticks fields. When
> filtering these reports, use the right width for these fields.
>
> Note that upper dword of context id is reserved, so squash lower dword
> only.
>
> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
> ---
> drivers/gpu/drm/i915/i915_perf.c | 105 ++++++++++++++++++++-----
> drivers/gpu/drm/i915/i915_perf_types.h | 6 ++
> 2 files changed, 92 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
> index 3306653c0b85..9715b964aa1e 100644
> --- a/drivers/gpu/drm/i915/i915_perf.c
> +++ b/drivers/gpu/drm/i915/i915_perf.c
> @@ -441,6 +441,75 @@ static u32 gen7_oa_hw_tail_read(struct i915_perf_stream *stream)
> return oastatus1 & GEN7_OASTATUS1_TAIL_MASK;
> }
>
> +#define oa_report_header_64bit(__s) \
> + ((__s)->oa_buffer.format->header == HDR_64_BIT)
> +
> +static inline u64
> +oa_report_id(struct i915_perf_stream *stream, void *report)
> +{
> + return oa_report_header_64bit(stream) ? *(u64 *)report : *(u32 *)report;
> +}
> +
> +static inline u64
> +oa_report_reason(struct i915_perf_stream *stream, void *report)
> +{
> + return (oa_report_id(stream, report) >> OAREPORT_REASON_SHIFT) &
> + (GRAPHICS_VER(stream->perf->i915) == 12 ?
> + OAREPORT_REASON_MASK_EXTENDED :
> + OAREPORT_REASON_MASK);
> +}
> +
> +static inline void
> +oa_report_id_clear(struct i915_perf_stream *stream, u32 *report)
> +{
> + if (oa_report_header_64bit(stream))
> + *(u64 *)report = 0;
> + else
> + *report = 0;
> +}
> +
> +static inline bool
> +oa_report_ctx_invalid(struct i915_perf_stream *stream, void *report)
> +{
> + return !(oa_report_id(stream, report) &
> + stream->perf->gen8_valid_ctx_bit) &&
> + GRAPHICS_VER(stream->perf->i915) <= 11;
> +}
> +
> +static inline u64
> +oa_timestamp(struct i915_perf_stream *stream, void *report)
> +{
> + return oa_report_header_64bit(stream) ?
> + *((u64 *)report + 1) :
> + *((u32 *)report + 1);
> +}
> +
> +static inline void
> +oa_timestamp_clear(struct i915_perf_stream *stream, u32 *report)
> +{
> + if (oa_report_header_64bit(stream))
> + *(u64 *)&report[2] = 0;
> + else
> + report[1] = 0;
> +}
> +
> +static inline u32
> +oa_context_id(struct i915_perf_stream *stream, u32 *report)
> +{
> + u32 ctx_id = oa_report_header_64bit(stream) ? report[4] : report[2];
> +
> + return ctx_id & stream->specific_ctx_id_mask;
> +}
> +
> +static inline void
> +oa_context_id_squash(struct i915_perf_stream *stream, u32 *report)
> +{
> + if (oa_report_header_64bit(stream))
> + report[4] = INVALID_CTX_ID;
> + else
> + report[2] = INVALID_CTX_ID;
> +}
Let's drop 'inline' from all these functions, the convention is to let
compiler decide to inline.
> +
> /**
> * oa_buffer_check_unlocked - check for data and update tail ptr state
> * @stream: i915 stream instance
> @@ -521,9 +590,10 @@ static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream)
> * If not : (╯°□°)╯︵ ┻━┻
> */
Might as well fix up the comment above to say report_id and timestamp
instead of dword 0 and 1.
With the above changes, this is:
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
next prev parent reply other threads:[~2023-02-21 22:14 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 0:58 [Intel-gfx] [PATCH v2 0/9] Add OAM support for MTL Umesh Nerlige Ramappa
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 1/9] drm/i915/perf: Drop wakeref on GuC RC error Umesh Nerlige Ramappa
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 2/9] drm/i915/perf: Add helper to check supported OA engines Umesh Nerlige Ramappa
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 3/9] drm/i915/perf: Validate OA sseu config outside switch Umesh Nerlige Ramappa
2023-02-17 1:10 ` Dixit, Ashutosh
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 4/9] drm/i915/perf: Group engines into respective OA groups Umesh Nerlige Ramappa
2023-02-22 21:52 ` Dixit, Ashutosh
2023-02-24 17:30 ` Umesh Nerlige Ramappa
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 5/9] drm/i915/perf: Fail modprobe if i915_perf_init fails on OOM Umesh Nerlige Ramappa
2023-02-17 2:04 ` Dixit, Ashutosh
2023-02-17 9:55 ` Jani Nikula
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 6/9] drm/i915/perf: Parse 64bit report header formats correctly Umesh Nerlige Ramappa
2023-02-21 22:14 ` Dixit, Ashutosh [this message]
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 7/9] drm/i915/perf: Handle non-power-of-2 reports Umesh Nerlige Ramappa
2023-02-17 20:58 ` Dixit, Ashutosh
2023-02-18 0:05 ` Umesh Nerlige Ramappa
2023-02-18 1:57 ` Dixit, Ashutosh
2023-02-21 18:51 ` Dixit, Ashutosh
2023-02-24 19:12 ` Umesh Nerlige Ramappa
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 8/9] drm/i915/perf: Add engine class instance parameters to perf Umesh Nerlige Ramappa
2023-02-17 23:37 ` Umesh Nerlige Ramappa
2023-02-21 23:53 ` Dixit, Ashutosh
2023-02-22 0:10 ` Dixit, Ashutosh
2023-02-24 19:37 ` Umesh Nerlige Ramappa
2023-02-24 20:48 ` Dixit, Ashutosh
2023-02-17 0:58 ` [Intel-gfx] [PATCH v2 9/9] drm/i915/perf: Add support for OA media units Umesh Nerlige Ramappa
2023-02-17 23:37 ` Umesh Nerlige Ramappa
2023-02-23 20:05 ` Dixit, Ashutosh
2023-02-25 0:58 ` Umesh Nerlige Ramappa
2023-02-25 3:58 ` Dixit, Ashutosh
2023-02-17 1:35 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for Add OAM support for MTL (rev2) Patchwork
2023-02-17 1:55 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-02-17 16:09 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87cz62br90.wl-ashutosh.dixit@intel.com \
--to=ashutosh.dixit@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=umesh.nerlige.ramappa@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox