From: Jani Nikula <jani.nikula@intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH] drm/i915/hdmi: convert intel_hdmi_to_dev to intel_hdmi_to_i915
Date: Fri, 01 Oct 2021 12:40:30 +0300 [thread overview]
Message-ID: <87fstlt75d.fsf@intel.com> (raw)
In-Reply-To: <YUnVmuhQJ+UXmp/a@intel.com>
On Tue, 21 Sep 2021, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Tue, Sep 21, 2021 at 02:02:44PM +0300, Jani Nikula wrote:
>> Prefer i915 over drm pointer.
>>
>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Thanks, pushed.
BR,
Jani.
>
>> ---
>> drivers/gpu/drm/i915/display/intel_hdmi.c | 16 +++++++---------
>> 1 file changed, 7 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
>> index 1bc33766ed39..1e8a87f81e8e 100644
>> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
>> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
>> @@ -53,21 +53,20 @@
>> #include "intel_panel.h"
>> #include "intel_snps_phy.h"
>>
>> -static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi)
>> +static struct drm_i915_private *intel_hdmi_to_i915(struct intel_hdmi *intel_hdmi)
>> {
>> - return hdmi_to_dig_port(intel_hdmi)->base.base.dev;
>> + return to_i915(hdmi_to_dig_port(intel_hdmi)->base.base.dev);
>> }
>>
>> static void
>> assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
>> {
>> - struct drm_device *dev = intel_hdmi_to_dev(intel_hdmi);
>> - struct drm_i915_private *dev_priv = to_i915(dev);
>> + struct drm_i915_private *dev_priv = intel_hdmi_to_i915(intel_hdmi);
>> u32 enabled_bits;
>>
>> enabled_bits = HAS_DDI(dev_priv) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
>>
>> - drm_WARN(dev,
>> + drm_WARN(&dev_priv->drm,
>> intel_de_read(dev_priv, intel_hdmi->hdmi_reg) & enabled_bits,
>> "HDMI port enabled, expecting disabled\n");
>> }
>> @@ -1246,7 +1245,7 @@ static void hsw_set_infoframes(struct intel_encoder *encoder,
>>
>> void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable)
>> {
>> - struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi));
>> + struct drm_i915_private *dev_priv = intel_hdmi_to_i915(hdmi);
>> struct i2c_adapter *adapter =
>> intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
>>
>> @@ -1830,7 +1829,7 @@ hdmi_port_clock_valid(struct intel_hdmi *hdmi,
>> int clock, bool respect_downstream_limits,
>> bool has_hdmi_sink)
>> {
>> - struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi));
>> + struct drm_i915_private *dev_priv = intel_hdmi_to_i915(hdmi);
>>
>> if (clock < 25000)
>> return MODE_CLOCK_LOW;
>> @@ -1946,8 +1945,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
>> struct drm_display_mode *mode)
>> {
>> struct intel_hdmi *hdmi = intel_attached_hdmi(to_intel_connector(connector));
>> - struct drm_device *dev = intel_hdmi_to_dev(hdmi);
>> - struct drm_i915_private *dev_priv = to_i915(dev);
>> + struct drm_i915_private *dev_priv = intel_hdmi_to_i915(hdmi);
>> enum drm_mode_status status;
>> int clock = mode->clock;
>> int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
>> --
>> 2.30.2
--
Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2021-10-01 9:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-21 11:02 [Intel-gfx] [PATCH] drm/i915/hdmi: convert intel_hdmi_to_dev to intel_hdmi_to_i915 Jani Nikula
2021-09-21 12:52 ` Ville Syrjälä
2021-10-01 9:40 ` Jani Nikula [this message]
2021-09-21 14:05 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/hdmi: convert intel_hdmi_to_dev to intel_hdmi_to_i915 (rev2) Patchwork
2021-09-21 16:42 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2021-04-01 11:59 [Intel-gfx] [PATCH] drm/i915/hdmi: convert intel_hdmi_to_dev to intel_hdmi_to_i915 Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fstlt75d.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox