From: Jani Nikula <jani.nikula@intel.com>
To: Swati Sharma <swati2.sharma@intel.com>, intel-gfx@lists.freedesktop.org
Cc: daniel.vetter@ffwll.ch, ankit.k.nautiyal@intel.com
Subject: Re: [v4][PATCH 2/3] drm/i915/color: Extract icl_read_luts()
Date: Tue, 24 Sep 2019 15:17:42 +0300 [thread overview]
Message-ID: <87h851ubvd.fsf@intel.com> (raw)
In-Reply-To: <1569096654-24433-3-git-send-email-swati2.sharma@intel.com>
On Sun, 22 Sep 2019, Swati Sharma <swati2.sharma@intel.com> wrote:
> For icl+, have hw read out to create hw blob of gamma
> lut values. icl+ platforms supports multi segmented gamma
> mode by default, add hw lut creation for this mode.
>
> This will be used to validate gamma programming using dsb
> (display state buffer) which is a tgl specific feature.
>
> Major change done-removal of readouts of coarse and fine segments
> because PAL_PREC_DATA register isn't giving propoer values.
> State checker limited only to "fine segment"
>
> v2: -readout code for multisegmented gamma has to come
> up with some intermediate entries that aren't preserved
> in hardware (Jani N)
> -linear interpolation (Ville)
> -moved common code to check gamma_enable to specific funcs,
> since icl doesn't support that
> v3: -use u16 instead of __u16 [Jani N]
> -used single lut [Jani N]
> -improved and more readable for loops [Jani N]
> -read values directly to actual locations and then fill gaps [Jani N]
> -moved cleaning to patch 1 [Jani N]
> -renamed icl_read_lut_multi_seg() to icl_read_lut_multi_segment to
> make it similar to icl_load_luts()
> -renamed icl_compute_interpolated_gamma_blob() to
> icl_compute_interpolated_gamma_lut_values() more sensible, I guess
> v4: -removed interpolated func for creating gamma lut values
> -removed readouts of fine and coarse segments, failure to read PAL_PREC_DATA
> correctly
>
> Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_color.c | 126 +++++++++++++++++++++++++----
> drivers/gpu/drm/i915/i915_reg.h | 6 ++
> 2 files changed, 117 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_color.c b/drivers/gpu/drm/i915/display/intel_color.c
> index f774938..299ada5b 100644
> --- a/drivers/gpu/drm/i915/display/intel_color.c
> +++ b/drivers/gpu/drm/i915/display/intel_color.c
> @@ -1371,6 +1371,9 @@ static int icl_color_check(struct intel_crtc_state *crtc_state)
>
> static int i9xx_gamma_precision(const struct intel_crtc_state *crtc_state)
> {
> + if (!crtc_state->gamma_enable)
> + return 0;
> +
> switch (crtc_state->gamma_mode) {
> case GAMMA_MODE_MODE_8BIT:
> return 8;
> @@ -1384,6 +1387,9 @@ static int i9xx_gamma_precision(const struct intel_crtc_state *crtc_state)
>
> static int ilk_gamma_precision(const struct intel_crtc_state *crtc_state)
> {
> + if (!crtc_state->gamma_enable)
> + return 0;
> +
> if ((crtc_state->csc_mode & CSC_POSITION_BEFORE_GAMMA) == 0)
> return 0;
>
> @@ -1400,6 +1406,9 @@ static int ilk_gamma_precision(const struct intel_crtc_state *crtc_state)
>
> static int chv_gamma_precision(const struct intel_crtc_state *crtc_state)
> {
> + if (!crtc_state->gamma_enable)
> + return 0;
> +
> if (crtc_state->cgm_mode & CGM_PIPE_MODE_GAMMA)
> return 10;
> else
> @@ -1408,6 +1417,9 @@ static int chv_gamma_precision(const struct intel_crtc_state *crtc_state)
>
> static int glk_gamma_precision(const struct intel_crtc_state *crtc_state)
> {
> + if (!crtc_state->gamma_enable)
> + return 0;
> +
> switch (crtc_state->gamma_mode) {
> case GAMMA_MODE_MODE_8BIT:
> return 8;
> @@ -1419,21 +1431,39 @@ static int glk_gamma_precision(const struct intel_crtc_state *crtc_state)
> }
> }
>
> +static int icl_gamma_precision(const struct intel_crtc_state *crtc_state)
> +{
> + if ((crtc_state->gamma_mode & POST_CSC_GAMMA_ENABLE) == 0)
> + return 0;
> +
> + switch (crtc_state->gamma_mode & GAMMA_MODE_MODE_MASK) {
> + case GAMMA_MODE_MODE_8BIT:
> + return 8;
> + case GAMMA_MODE_MODE_10BIT:
> + return 10;
> + case GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED:
> + return 16;
> + default:
> + MISSING_CASE(crtc_state->gamma_mode);
> + return 0;
> + }
> +
> +}
> +
> int intel_color_get_gamma_bit_precision(const struct intel_crtc_state *crtc_state)
> {
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>
> - if (!crtc_state->gamma_enable)
> - return 0;
> -
> if (HAS_GMCH(dev_priv)) {
> if (IS_CHERRYVIEW(dev_priv))
> return chv_gamma_precision(crtc_state);
> else
> return i9xx_gamma_precision(crtc_state);
> } else {
> - if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
> + if (INTEL_GEN(dev_priv) >= 11)
> + return icl_gamma_precision(crtc_state);
> + else if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
> return glk_gamma_precision(crtc_state);
> else if (IS_IRONLAKE(dev_priv))
> return ilk_gamma_precision(crtc_state);
> @@ -1464,6 +1494,20 @@ static bool intel_color_lut_entry_equal(struct drm_color_lut *lut1,
> return true;
> }
>
> +static bool intel_color_lut_entry_multi_equal(struct drm_color_lut *lut1,
> + struct drm_color_lut *lut2,
> + int lut_size, u32 err)
> +{
> + int i;
> +
> + for (i = 0; i < 9; i++) {
> + if (!err_check(&lut1[i], &lut2[i], err))
> + return false;
> + }
> +
> + return true;
> +}
> +
> bool intel_color_lut_equal(struct drm_property_blob *blob1,
> struct drm_property_blob *blob2,
> u32 gamma_mode, u32 bit_precision)
> @@ -1482,16 +1526,8 @@ bool intel_color_lut_equal(struct drm_property_blob *blob1,
> lut_size2 = drm_color_lut_size(blob2);
>
> /* check sw and hw lut size */
> - switch (gamma_mode) {
> - case GAMMA_MODE_MODE_8BIT:
> - case GAMMA_MODE_MODE_10BIT:
> - if (lut_size1 != lut_size2)
> - return false;
> - break;
> - default:
> - MISSING_CASE(gamma_mode);
> - return false;
> - }
> + if (lut_size1 != lut_size2)
> + return false;
>
> lut1 = blob1->data;
> lut2 = blob2->data;
> @@ -1499,13 +1535,18 @@ bool intel_color_lut_equal(struct drm_property_blob *blob1,
> err = 0xffff >> bit_precision;
>
> /* check sw and hw lut entry to be equal */
> - switch (gamma_mode) {
> + switch (gamma_mode & GAMMA_MODE_MODE_MASK) {
> case GAMMA_MODE_MODE_8BIT:
> case GAMMA_MODE_MODE_10BIT:
> if (!intel_color_lut_entry_equal(lut1, lut2,
> lut_size2, err))
> return false;
> break;
> + case GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED:
> + if (!intel_color_lut_entry_multi_equal(lut1, lut2,
> + lut_size2, err))
> + return false;
> + break;
> default:
> MISSING_CASE(gamma_mode);
> return false;
> @@ -1745,6 +1786,60 @@ static void glk_read_luts(struct intel_crtc_state *crtc_state)
> crtc_state->base.gamma_lut = glk_read_lut_10(crtc_state, PAL_PREC_INDEX_VALUE(0));
> }
>
> +static struct drm_property_blob *
> +icl_read_lut_multi_segment(const struct intel_crtc_state *crtc_state)
> +{
> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> + int lut_size = INTEL_INFO(dev_priv)->color.gamma_lut_size;
> + enum pipe pipe = crtc->pipe;
> + struct drm_property_blob *blob;
> + struct drm_color_lut *blob_data;
> + u32 i, val1, val2;
> +
> + blob = drm_property_create_blob(&dev_priv->drm,
> + sizeof(struct drm_color_lut) * lut_size,
> + NULL);
> + if (IS_ERR(blob))
> + return NULL;
> +
> + blob_data = blob->data;
> +
> + I915_WRITE(PREC_PAL_MULTI_SEG_INDEX(pipe), PAL_PREC_AUTO_INCREMENT);
> +
> + for (i = 0; i < 9; i++) {
> + val1 = I915_READ(PREC_PAL_MULTI_SEG_DATA(pipe));
> + val2 = I915_READ(PREC_PAL_MULTI_SEG_DATA(pipe));
> +
> + blob_data[i].red = REG_FIELD_GET(PAL_PREC_MULTI_SEG_RED_UDW_MASK, val2) << 6 |
> + REG_FIELD_GET(PAL_PREC_MULTI_SEG_RED_LDW_MASK, val1);
> + blob_data[i].green = REG_FIELD_GET(PAL_PREC_MULTI_SEG_GREEN_UDW_MASK, val2) << 6 |
> + REG_FIELD_GET(PAL_PREC_MULTI_SEG_GREEN_LDW_MASK, val1);
> + blob_data[i].blue = REG_FIELD_GET(PAL_PREC_MULTI_SEG_BLUE_UDW_MASK, val2) << 6 |
> + REG_FIELD_GET(PAL_PREC_MULTI_SEG_BLUE_LDW_MASK, val1);
> + }
> +
> + /*
> + * FIXME readouts from PAL_PREC_DATA register aren't giving correct values
> + * in the case of fine and coarse segments. Restricting readouts only for
> + * super fine segment as of now.
> + */
Apparently this is causing problems with the display, possibly because
the blob ends up being only 9 entries. Can you try to reproduce locally?
We're likely going to have to revert this.
BR,
Jani.
> +
> + return blob;
> +}
> +
> +static void icl_read_luts(struct intel_crtc_state *crtc_state)
> +{
> + if ((crtc_state->gamma_mode & GAMMA_MODE_MODE_MASK) ==
> + GAMMA_MODE_MODE_8BIT)
> + crtc_state->base.gamma_lut = i9xx_read_lut_8(crtc_state);
> + else if ((crtc_state->gamma_mode & GAMMA_MODE_MODE_MASK) ==
> + GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED)
> + crtc_state->base.gamma_lut = icl_read_lut_multi_segment(crtc_state);
> + else
> + crtc_state->base.gamma_lut = glk_read_lut_10(crtc_state, PAL_PREC_INDEX_VALUE(0));
> +}
> +
> void intel_color_init(struct intel_crtc *crtc)
> {
> struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> @@ -1788,6 +1883,7 @@ void intel_color_init(struct intel_crtc *crtc)
>
> if (INTEL_GEN(dev_priv) >= 11) {
> dev_priv->display.load_luts = icl_load_luts;
> + dev_priv->display.read_luts = icl_read_luts;
> } else if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) {
> dev_priv->display.load_luts = glk_load_luts;
> dev_priv->display.read_luts = glk_read_luts;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index bf37ece..1ea26c8 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -10401,6 +10401,12 @@ enum skl_power_gate {
>
> #define _PAL_PREC_MULTI_SEG_DATA_A 0x4A40C
> #define _PAL_PREC_MULTI_SEG_DATA_B 0x4AC0C
> +#define PAL_PREC_MULTI_SEG_RED_LDW_MASK REG_GENMASK(29, 24)
> +#define PAL_PREC_MULTI_SEG_RED_UDW_MASK REG_GENMASK(29, 20)
> +#define PAL_PREC_MULTI_SEG_GREEN_LDW_MASK REG_GENMASK(19, 14)
> +#define PAL_PREC_MULTI_SEG_GREEN_UDW_MASK REG_GENMASK(19, 10)
> +#define PAL_PREC_MULTI_SEG_BLUE_LDW_MASK REG_GENMASK(9, 4)
> +#define PAL_PREC_MULTI_SEG_BLUE_UDW_MASK REG_GENMASK(9, 0)
>
> #define PREC_PAL_MULTI_SEG_INDEX(pipe) _MMIO_PIPE(pipe, \
> _PAL_PREC_MULTI_SEG_INDEX_A, \
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-09-24 12:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-21 20:10 [v4][PATCH 0/3] adding gamma state checker for icl+ platforms Swati Sharma
2019-09-21 20:10 ` [v4][PATCH 1/3] drm/i915/color: Fix formatting issues Swati Sharma
2019-09-22 10:26 ` Jani Nikula
2019-09-23 5:29 ` Sharma, Swati2
2019-09-21 20:10 ` [v4][PATCH 2/3] drm/i915/color: Extract icl_read_luts() Swati Sharma
2019-09-24 12:17 ` Jani Nikula [this message]
2019-09-24 14:28 ` Sharma, Swati2
2019-09-25 5:43 ` Saarinen, Jani
2019-09-21 20:10 ` [v4][PATCH 3/3] FOR_TESTING_ONLY: Print rgb values of hw and sw blobs Swati Sharma
2019-09-22 12:39 ` ✗ Fi.CI.CHECKPATCH: warning for adding gamma state checker for icl+ platforms (rev4) Patchwork
2019-09-22 13:02 ` ✓ Fi.CI.BAT: success " Patchwork
2019-09-23 1:51 ` ✓ Fi.CI.IGT: " Patchwork
2019-09-23 7:42 ` [v4][PATCH 0/3] adding gamma state checker for icl+ platforms Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h851ubvd.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=swati2.sharma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox