Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Cc: "Florent Flament" <contact@florentflament.com>,
	"Pavel Petrovic" <ppetrovic@acm.org>,
	"Sérgio M . Basto" <sergio@serjux.com>
Subject: Re: [PATCH v2] drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log
Date: Fri, 20 Apr 2018 13:36:40 +0300	[thread overview]
Message-ID: <87in8mdv0n.fsf@intel.com> (raw)
In-Reply-To: <20180419160700.19828-1-ville.syrjala@linux.intel.com>

On Thu, 19 Apr 2018, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Florent Flament <contact@florentflament.com>
>
> Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to
> power on` in kernel log at boot time.
>
> Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power
> on its screen during Intel i915 DRM initialization. This currently
> results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for
> panel to power on` message appearing in the kernel log during boot
> time and when stopping the machine.
>
> This change increases the timeout of the `intel_enable_lvds` function
> from 1 to 2 seconds, letting enough time for the Satellite 930 LCD
> screen to power on, and suppressing the error message from the kernel
> log.

Please update the commit message to match what the patch actually does
now, instead of hiding it in braces below. With that (and can be done
while pushing),

Reviewed-by: Jani Nikula <jani.nikula@intel.com>


>
> This patch has been successfully tested on Linux 4.14 running on a
> Toshiba Satellite Z930.
>
> Signed-off-by: Florent Flament <contact@florentflament.com>
> [vsyrjala: bump the timeout from 2 to 5 seconds to match the DP
>  code and properly cover the max hw timeout of ~4 seconds, and
>  drop the comment about the specific machine since this is not
>  a particulary surprising issue, nor specific to that one machine]
> Cc: Pavel Petrovic <ppetrovic@acm.org>
> Cc: Sérgio M. Basto <sergio@serjux.com>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414
> References: https://bugzilla.kernel.org/show_bug.cgi?id=57591
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_lvds.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index d35d2d50f595..8691c86f579c 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -326,7 +326,8 @@ static void intel_enable_lvds(struct intel_encoder *encoder,
>  
>  	I915_WRITE(PP_CONTROL(0), I915_READ(PP_CONTROL(0)) | PANEL_POWER_ON);
>  	POSTING_READ(lvds_encoder->reg);
> -	if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, PP_ON, 1000))
> +
> +	if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, PP_ON, 5000))
>  		DRM_ERROR("timed out waiting for panel to power on\n");
>  
>  	intel_panel_enable_backlight(pipe_config, conn_state);

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-04-20 10:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-20 22:28 [PATCH] drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log Florent Flament
2017-11-21  0:23 ` ✗ Fi.CI.BAT: warning for " Patchwork
2018-04-19 16:07 ` [PATCH v2] " Ville Syrjala
2018-04-20 10:36   ` Jani Nikula [this message]
2018-05-04 19:33     ` Ville Syrjälä
2018-04-19 16:45 ` ✓ Fi.CI.BAT: success for drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log (rev2) Patchwork
2018-04-19 23:44 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87in8mdv0n.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=contact@florentflament.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ppetrovic@acm.org \
    --cc=sergio@serjux.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox