From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/6] drm/i915/vga: Add more VGACNTRL bits
Date: Thu, 17 Apr 2025 15:50:38 +0300 [thread overview]
Message-ID: <87o6wvne8x.fsf@intel.com> (raw)
In-Reply-To: <20250417114454.12836-3-ville.syrjala@linux.intel.com>
On Thu, 17 Apr 2025, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Define a pile of extra VGACNTRL bits. We don't really have
> any real use for most of these but nicer to have them all
> in one place rather than trawling the specs when one wants
> to know what's in there.
>
> I will have some real use for the CHV pipe select bits later.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
I didn't go through *all* the platforms, but seems good enough. ;)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 21 +++++++++++++++++++--
> 1 file changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 81765f27b258..a533889c2793 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1815,9 +1815,26 @@
> /* VBIOS regs */
> #define VGACNTRL _MMIO(0x71400)
> #define VGA_DISP_DISABLE REG_BIT(31)
> -#define VGA_2X_MODE REG_BIT(30)
> -#define VGA_PIPE_SEL_MASK REG_BIT(29)
> +#define VGA_2X_MODE REG_BIT(30) /* pre-ilk */
> +#define VGA_PIPE_SEL_MASK REG_BIT(29) /* pre-ivb */
> #define VGA_PIPE_SEL(pipe) REG_FIELD_PREP(VGA_PIPE_SEL_MASK, (pipe))
> +#define VGA_PIPE_SEL_MASK_CHV REG_GENMASK(29, 28) /* chv */
> +#define VGA_PIPE_SEL_CHV(pipe) REG_FIELD_PREP(VGA_PIPE_SEL_MASK_CHV, (pipe))
> +#define VGA_BORDER_ENABLE REG_BIT(26)
> +#define VGA_PIPE_CSC_ENABLE REG_BIT(24) /* ilk+ */
> +#define VGA_CENTERING_ENABLE_MASK REG_GENMASK(25, 24) /* pre-ilk */
> +#define VGA_PALETTE_READ_SEL REG_BIT(23) /* pre-ivb */
> +#define VGA_PALETTE_A_WRITE_DISABLE REG_BIT(22) /* pre-ivb */
> +#define VGA_PALETTE_B_WRITE_DISABLE REG_BIT(21) /* pre-ivb */
> +#define VGA_LEGACY_8BIT_PALETTE_ENABLE REG_BIT(20)
> +#define VGA_PALETTE_BYPASS REG_BIT(19)
> +#define VGA_NINE_DOT_DISABLE REG_BIT(18)
> +#define VGA_PALETTE_READ_SEL_HI_CHV REG_BIT(15) /* chv */
> +#define VGA_PALETTE_C_WRITE_DISABLE_CHV REG_BIT(14) /* chv */
> +#define VGA_ACTIVE_THROTTLING_MASK REG_GENMASK(15, 12) /* ilk+ */
> +#define VGA_BLANK_THROTTLING_MASK REG_GENMASK(11, 8) /* ilk+ */
> +#define VGA_BLINK_DUTY_CYCLE_MASK REG_GENMASK(7, 6)
> +#define VGA_VSYNC_BLINK_RATE_MASK REG_GENMASK(5, 0)
>
> #define VLV_VGACNTRL _MMIO(VLV_DISPLAY_BASE + 0x71400)
--
Jani Nikula, Intel
next prev parent reply other threads:[~2025-04-17 12:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-17 11:44 [PATCH 0/6] drm/i915/vga: Clean up VGA plane handling Ville Syrjala
2025-04-17 11:44 ` [PATCH 1/6] drm/i915/vga: Clean up VGACNTRL bits Ville Syrjala
2025-04-17 12:45 ` Jani Nikula
2025-04-17 11:44 ` [PATCH 2/6] drm/i915/vga: Add more " Ville Syrjala
2025-04-17 12:50 ` Jani Nikula [this message]
2025-04-17 11:44 ` [PATCH 3/6] drm/i915/vga: Extract intel_vga_regs.h Ville Syrjala
2025-04-17 12:52 ` Jani Nikula
2025-04-17 11:44 ` [PATCH 4/6] drm/i915/vga: Include the current pipe in the VGA disable debug message Ville Syrjala
2025-04-17 12:53 ` Jani Nikula
2025-04-17 11:44 ` [PATCH 5/6] drm/i915/vga: Nuke vga_redisable_power_on() Ville Syrjala
2025-04-17 13:05 ` Jani Nikula
2025-04-17 11:44 ` [PATCH 6/6] drm/i915/vga: Consolidate intel_vga_disable() calls Ville Syrjala
2025-04-17 13:32 ` Jani Nikula
2025-04-17 12:41 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/vga: Clean up VGA plane handling Patchwork
2025-04-17 12:41 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-04-17 13:11 ` ✓ i915.CI.BAT: success " Patchwork
2025-04-18 0:14 ` ✗ i915.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o6wvne8x.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox