Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Kevin Chowski <chowski@chromium.org>,
	LKML <linux-kernel@vger.kernel.org>
Cc: Kevin Chowski <chowski@chromium.org>,
	David Airlie <airlied@linux.ie>,
	intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	Wambui Karuga <wambui.karugax@gmail.com>
Subject: Re: [Intel-gfx] [PATCH] i915: Introduce quirk for shifting eDP brightness.
Date: Thu, 17 Sep 2020 20:28:08 +0300	[thread overview]
Message-ID: <87o8m4uxcn.fsf@intel.com> (raw)
In-Reply-To: <20200917110838.1.I63d52f5b96d7e81e1e2dc2a72c4bf5fd84d3d3d0@changeid>

On Thu, 17 Sep 2020, Kevin Chowski <chowski@chromium.org> wrote:
> We have observed that Google Pixelbook's backlight hardware is
> interpretting these backlight bits from the most-significant side of the
> 16 bit word (if DP_EDP_PWMGEN_BIT_COUNT < 16), whereas the driver code
> assumes the peripheral cares about the least-significant bits.
>
> Testing was done from within Chrome OS's build environment when the
> patch is backported to 5.4 (the version we are newly targeting for the
> Pixelbook); for the record:
>    $ emerge-eve-kernelnext sys-kernel/chromeos-kernel-5_4 && \
>       ./update_kernel.sh --remote=$IP
>
> I used `/sys/kernel/debug/dri/0/eDP-1/i915_dpcd` on my laptop to verify
> that the registers were being set according to what the actual hardware
> expects; I also observe that the backlight is noticeably brighter with
> this patch.

It's unclear to me what kernel version this is against, and what you've
actually tested.

Have you tried v5.7 kernel with Lyude's fde7266fb2f6 ("drm/i915: Fix eDP
DPCD aux max backlight calculations")?

I just want to make sure you've tested with all the relevant fixes
before adding quirks.

BR,
Jani.

>
> Signed-off-by: Kevin Chowski <chowski@chromium.org>
> ---
>
>  .../drm/i915/display/intel_dp_aux_backlight.c | 34 +++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_quirks.c   | 13 +++++++
>  drivers/gpu/drm/i915/i915_drv.h               |  1 +
>  3 files changed, 48 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> index acbd7eb66cbe3..99c98f217356d 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> @@ -91,6 +91,23 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
>  	if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT)
>  		level = (read_val[0] << 8 | read_val[1]);
>  
> +	if (i915->quirks & QUIRK_SHIFT_EDP_BACKLIGHT_BRIGHTNESS) {
> +		if (!drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT,
> +						&read_val[0])) {
> +			DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
> +					DP_EDP_PWMGEN_BIT_COUNT);
> +			return 0;
> +		}
> +		// Only bits 4:0 are used, 7:5 are reserved.
> +		read_val[0] = read_val[0] & 0x1F;
> +		if (read_val[0] > 16) {
> +			DRM_DEBUG_KMS("Invalid DP_EDP_PWNGEN_BIT_COUNT 0x%X, expected at most 16\n",
> +						read_val[0]);
> +			return 0;
> +		}
> +		level >>= 16 - read_val[0];
> +	}
> +
>  	return level;
>  }
>  
> @@ -106,6 +123,23 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  	u8 vals[2] = { 0x0 };
>  
> +	if (i915->quirks & QUIRK_SHIFT_EDP_BACKLIGHT_BRIGHTNESS) {
> +		if (!drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT,
> +						&vals[0])) {
> +			DRM_DEBUG_KMS("Failed to write aux backlight level: Failed to read DPCD register 0x%x\n",
> +					  DP_EDP_PWMGEN_BIT_COUNT);
> +			return;
> +		}
> +		// Only bits 4:0 are used, 7:5 are reserved.
> +		vals[0] = vals[0] & 0x1F;
> +		if (vals[0] > 16) {
> +			DRM_DEBUG_KMS("Failed to write aux backlight level: Invalid DP_EDP_PWNGEN_BIT_COUNT 0x%X, expected at most 16\n",
> +						vals[0]);
> +			return;
> +		}
> +		level <<= (16 - vals[0]) & 0xFFFF;
> +	}
> +
>  	vals[0] = level;
>  
>  	/* Write the MSB and/or LSB */
> diff --git a/drivers/gpu/drm/i915/display/intel_quirks.c b/drivers/gpu/drm/i915/display/intel_quirks.c
> index 46beb155d835f..63b27d49b2864 100644
> --- a/drivers/gpu/drm/i915/display/intel_quirks.c
> +++ b/drivers/gpu/drm/i915/display/intel_quirks.c
> @@ -53,6 +53,16 @@ static void quirk_increase_ddi_disabled_time(struct drm_i915_private *i915)
>  	drm_info(&i915->drm, "Applying Increase DDI Disabled quirk\n");
>  }
>  
> +/*
> + * Some eDP backlight hardware uses the most-significant bits of the brightness
> + * register, so brightness values must be shifted first.
> + */
> +static void quirk_shift_edp_backlight_brightness(struct drm_i915_private *i915)
> +{
> +	i915->quirks |= QUIRK_SHIFT_EDP_BACKLIGHT_BRIGHTNESS;
> +	DRM_INFO("Applying shift eDP backlight brightness quirk\n");
> +}
> +
>  struct intel_quirk {
>  	int device;
>  	int subsystem_vendor;
> @@ -156,6 +166,9 @@ static struct intel_quirk intel_quirks[] = {
>  	/* ASRock ITX*/
>  	{ 0x3185, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
>  	{ 0x3184, 0x1849, 0x2212, quirk_increase_ddi_disabled_time },
> +
> +	/* Google Pixelbook */
> +	{ 0x591E, 0x8086, 0x2212, quirk_shift_edp_backlight_brightness },
>  };
>  
>  void intel_init_quirks(struct drm_i915_private *i915)
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index e4f7f6518945b..cc93bede4fab8 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -525,6 +525,7 @@ struct i915_psr {
>  #define QUIRK_PIN_SWIZZLED_PAGES (1<<5)
>  #define QUIRK_INCREASE_T12_DELAY (1<<6)
>  #define QUIRK_INCREASE_DDI_DISABLED_TIME (1<<7)
> +#define QUIRK_SHIFT_EDP_BACKLIGHT_BRIGHTNESS (1<<8)
>  
>  struct intel_fbdev;
>  struct intel_fbc_work;

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-09-17 17:28 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-17 17:09 [Intel-gfx] [PATCH] i915: Introduce quirk for shifting eDP brightness Kevin Chowski
2020-09-17 17:13 ` Lyude Paul
2020-09-17 17:31   ` Kevin Chowski
2020-09-17 18:47     ` Lyude Paul
2020-09-17 17:33   ` Kevin Chowski
2020-09-17 17:26 ` Ville Syrjälä
2020-09-17 17:28 ` Jani Nikula [this message]
2020-09-17 17:55   ` Kevin Chowski
2020-09-17 18:14     ` Puthikorn Voravootivat
2020-09-17 18:25       ` Ville Syrjälä
2020-09-17 18:43         ` Lyude Paul
2020-09-17 20:11         ` Ville Syrjälä
2020-09-18 17:59           ` Kevin Chowski
2020-09-18 18:15             ` Puthikorn Voravootivat
2020-09-22 18:47               ` Kevin Chowski
2020-09-22 19:58                 ` Puthikorn Voravootivat
2020-09-22 21:30                   ` Lyude Paul
2020-09-24 23:46                     ` Kevin Chowski
2020-09-25 16:53                       ` Lyude Paul
2020-09-29 19:32                         ` Kevin Chowski
2020-09-30 20:25                           ` Lyude Paul
2020-09-30 21:07                             ` Lyude Paul
2020-09-17 18:01 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2020-09-17 18:25 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-09-17 19:46 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87o8m4uxcn.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=airlied@linux.ie \
    --cc=chowski@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wambui.karugax@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox