From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 10/12] drm/i915: Relocate intel_{rotation, remapped}_info_size()
Date: Thu, 13 Feb 2025 21:21:51 +0200 [thread overview]
Message-ID: <87r041wsz4.fsf@intel.com> (raw)
In-Reply-To: <20250213150220.13580-11-ville.syrjala@linux.intel.com>
On Thu, 13 Feb 2025, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Move intel_{rotation,remapped}_info_size() into intel_fb.c as
> that seems a slightly better place than intel_display.c. I suppose
> these should live somewhere outside the display code as they are
> also used by the gem code.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 36 --------------------
> drivers/gpu/drm/i915/display/intel_display.h | 4 ---
> drivers/gpu/drm/i915/display/intel_fb.c | 36 ++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_fb.h | 5 +++
> drivers/gpu/drm/i915/i915_vma.c | 2 +-
> 5 files changed, 42 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 4800fefd6321..c38c37afc154 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -601,42 +601,6 @@ void intel_disable_transcoder(const struct intel_crtc_state *old_crtc_state)
> intel_wait_for_pipe_off(old_crtc_state);
> }
>
> -unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info)
> -{
> - unsigned int size = 0;
> - int i;
> -
> - for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++)
> - size += rot_info->plane[i].dst_stride * rot_info->plane[i].width;
> -
> - return size;
> -}
> -
> -unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info)
> -{
> - unsigned int size = 0;
> - int i;
> -
> - for (i = 0 ; i < ARRAY_SIZE(rem_info->plane); i++) {
> - unsigned int plane_size;
> -
> - if (rem_info->plane[i].linear)
> - plane_size = rem_info->plane[i].size;
> - else
> - plane_size = rem_info->plane[i].dst_stride * rem_info->plane[i].height;
> -
> - if (plane_size == 0)
> - continue;
> -
> - if (rem_info->plane_alignment)
> - size = ALIGN(size, rem_info->plane_alignment);
> -
> - size += plane_size;
> - }
> -
> - return size;
> -}
> -
> /*
> * Convert the x/y offsets into a linear offset.
> * Only valid with 0/180 degree rotation, which is fine since linear
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index d3afd134f70e..a7bd82662adf 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -59,8 +59,6 @@ struct intel_link_m_n;
> struct intel_plane;
> struct intel_plane_state;
> struct intel_power_domain_mask;
> -struct intel_remapped_info;
> -struct intel_rotation_info;
> struct pci_dev;
> struct work_struct;
>
> @@ -467,8 +465,6 @@ unsigned int intel_fb_xy_to_linear(int x, int y,
> int plane);
> void intel_add_fb_offsets(int *x, int *y,
> const struct intel_plane_state *state, int plane);
> -unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info);
> -unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info);
> bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv);
> void intel_encoder_destroy(struct drm_encoder *encoder);
> struct drm_display_mode *
> diff --git a/drivers/gpu/drm/i915/display/intel_fb.c b/drivers/gpu/drm/i915/display/intel_fb.c
> index 5875af2b61e6..c1923b4c13d6 100644
> --- a/drivers/gpu/drm/i915/display/intel_fb.c
> +++ b/drivers/gpu/drm/i915/display/intel_fb.c
> @@ -1891,6 +1891,42 @@ static void intel_plane_remap_gtt(struct intel_plane_state *plane_state)
> }
> }
>
> +unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info)
> +{
> + unsigned int size = 0;
> + int i;
> +
> + for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++)
> + size += rot_info->plane[i].dst_stride * rot_info->plane[i].width;
> +
> + return size;
> +}
> +
> +unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info)
> +{
> + unsigned int size = 0;
> + int i;
> +
> + for (i = 0 ; i < ARRAY_SIZE(rem_info->plane); i++) {
> + unsigned int plane_size;
> +
> + if (rem_info->plane[i].linear)
> + plane_size = rem_info->plane[i].size;
> + else
> + plane_size = rem_info->plane[i].dst_stride * rem_info->plane[i].height;
> +
> + if (plane_size == 0)
> + continue;
> +
> + if (rem_info->plane_alignment)
> + size = ALIGN(size, rem_info->plane_alignment);
> +
> + size += plane_size;
> + }
> +
> + return size;
> +}
> +
> void intel_fb_fill_view(const struct intel_framebuffer *fb, unsigned int rotation,
> struct intel_fb_view *view)
> {
> diff --git a/drivers/gpu/drm/i915/display/intel_fb.h b/drivers/gpu/drm/i915/display/intel_fb.h
> index 63728520eb06..d04d9274bb71 100644
> --- a/drivers/gpu/drm/i915/display/intel_fb.h
> +++ b/drivers/gpu/drm/i915/display/intel_fb.h
> @@ -19,6 +19,8 @@ struct intel_fb_view;
> struct intel_framebuffer;
> struct intel_plane;
> struct intel_plane_state;
> +struct intel_remapped_info;
> +struct intel_rotation_info;
>
> #define INTEL_PLANE_CAP_NONE 0
> #define INTEL_PLANE_CAP_CCS_RC BIT(0)
> @@ -80,6 +82,9 @@ bool intel_fb_needs_pot_stride_remap(const struct intel_framebuffer *fb);
> bool intel_plane_uses_fence(const struct intel_plane_state *plane_state);
> bool intel_fb_supports_90_270_rotation(const struct intel_framebuffer *fb);
>
> +unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info);
> +unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info);
> +
> int intel_fill_fb_info(struct intel_display *display, struct intel_framebuffer *fb);
> void intel_fb_fill_view(const struct intel_framebuffer *fb, unsigned int rotation,
> struct intel_fb_view *view);
> diff --git a/drivers/gpu/drm/i915/i915_vma.c b/drivers/gpu/drm/i915/i915_vma.c
> index 61b49007ecd4..632e316f8b05 100644
> --- a/drivers/gpu/drm/i915/i915_vma.c
> +++ b/drivers/gpu/drm/i915/i915_vma.c
> @@ -26,7 +26,7 @@
> #include <linux/dma-fence-array.h>
> #include <drm/drm_gem.h>
>
> -#include "display/intel_display.h"
> +#include "display/intel_fb.h"
More specific includes from outside of display are always welcome!
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> #include "display/intel_frontbuffer.h"
> #include "gem/i915_gem_lmem.h"
> #include "gem/i915_gem_object_frontbuffer.h"
--
Jani Nikula, Intel
next prev parent reply other threads:[~2025-02-13 19:22 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-13 15:02 [PATCH 00/12] drm/i915: Hoist some stuff out from intel_display.c Ville Syrjala
2025-02-13 15:02 ` [PATCH 01/12] drm/i915: Move modeset_retry stuff into intel_connector.c Ville Syrjala
2025-02-13 19:11 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 02/12] drm/i915: Always initialize connector->modeset_retry_work Ville Syrjala
2025-02-13 19:11 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 03/12] drm/i915: Extract intel_connector_cancel_modeset_retry_work() Ville Syrjala
2025-02-13 19:12 ` Jani Nikula
2025-02-13 19:13 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 04/12] drm/i915: Extract intel_hdcp_cancel_works() Ville Syrjala
2025-02-13 19:14 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 05/12] drm/i915: Move intel_hpd_poll_fini() into intel_hotplug.c Ville Syrjala
2025-02-13 19:15 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 06/12] drm/i915: Move intel_plane_destroy() into intel_atomic_plane.c Ville Syrjala
2025-02-13 19:17 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 07/12] drm/i915: Relocate vlv_wait_port_ready() Ville Syrjala
2025-02-13 19:18 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 08/12] drm/i915: Simplify vlv_wait_port_ready() arguments Ville Syrjala
2025-02-13 19:19 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 09/12] drm/i915: Relocate intel_plane_uses_fence() Ville Syrjala
2025-02-13 19:20 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 10/12] drm/i915: Relocate intel_{rotation, remapped}_info_size() Ville Syrjala
2025-02-13 19:21 ` Jani Nikula [this message]
2025-02-13 15:02 ` [PATCH 11/12] drm/i915: Relocate some other plane fb related stuff into intel_fb.c Ville Syrjala
2025-02-13 19:22 ` Jani Nikula
2025-02-13 15:02 ` [PATCH 12/12] drm/i915: s/state/plane_state/ Ville Syrjala
2025-02-13 19:23 ` Jani Nikula
2025-02-13 15:25 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Hoist some stuff out from intel_display.c Patchwork
2025-02-13 15:25 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-02-13 15:44 ` ✗ i915.CI.BAT: failure " Patchwork
2025-02-14 18:22 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Hoist some stuff out from intel_display.c (rev2) Patchwork
2025-02-14 18:22 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-02-14 18:39 ` ✗ i915.CI.BAT: failure " Patchwork
2025-02-15 3:02 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Hoist some stuff out from intel_display.c (rev3) Patchwork
2025-02-15 3:02 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-02-15 3:18 ` ✓ i915.CI.BAT: success " Patchwork
2025-02-15 6:56 ` ✗ i915.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r041wsz4.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox