From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH] drm/i915: Fix VLV/CHV HDMI/DP audio enable
Date: Thu, 08 Dec 2022 15:45:41 +0200 [thread overview]
Message-ID: <87wn72ypoa.fsf@intel.com> (raw)
In-Reply-To: <20221207225219.29060-1-ville.syrjala@linux.intel.com>
On Thu, 08 Dec 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Despite what I claimed in commit c3c5dc1d9224
> ("drm/i915/audio: Do the vblank waits") the vblank
> interrupts are in fact not enabled yet when we do the
> audio enable sequence on VLV/CHV (all other platforms are
> fine).
>
> Reorder the enable sequence on VLV/CHV to match that of the
> other platforms so that the audio enable happens after the
> pipe has been enabled.
>
> Fixes: c3c5dc1d9224 ("drm/i915/audio: Do the vblank waits")
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/g4x_dp.c | 4 +--
> drivers/gpu/drm/i915/display/g4x_hdmi.c | 41 ++++++++++++++++---------
> 2 files changed, 29 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/g4x_dp.c b/drivers/gpu/drm/i915/display/g4x_dp.c
> index 3593938dcd87..24ef36ec2d3d 100644
> --- a/drivers/gpu/drm/i915/display/g4x_dp.c
> +++ b/drivers/gpu/drm/i915/display/g4x_dp.c
> @@ -673,8 +673,6 @@ static void intel_enable_dp(struct intel_atomic_state *state,
> intel_dp_pcon_dsc_configure(intel_dp, pipe_config);
> intel_dp_start_link_train(intel_dp, pipe_config);
> intel_dp_stop_link_train(intel_dp, pipe_config);
> -
> - intel_audio_codec_enable(encoder, pipe_config, conn_state);
> }
>
> static void g4x_enable_dp(struct intel_atomic_state *state,
> @@ -683,6 +681,7 @@ static void g4x_enable_dp(struct intel_atomic_state *state,
> const struct drm_connector_state *conn_state)
> {
> intel_enable_dp(state, encoder, pipe_config, conn_state);
> + intel_audio_codec_enable(encoder, pipe_config, conn_state);
> intel_edp_backlight_on(pipe_config, conn_state);
> }
>
> @@ -691,6 +690,7 @@ static void vlv_enable_dp(struct intel_atomic_state *state,
> const struct intel_crtc_state *pipe_config,
> const struct drm_connector_state *conn_state)
> {
> + intel_audio_codec_enable(encoder, pipe_config, conn_state);
> intel_edp_backlight_on(pipe_config, conn_state);
> }
>
> diff --git a/drivers/gpu/drm/i915/display/g4x_hdmi.c b/drivers/gpu/drm/i915/display/g4x_hdmi.c
> index 121caeaa409b..c3580d96765c 100644
> --- a/drivers/gpu/drm/i915/display/g4x_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/g4x_hdmi.c
> @@ -157,24 +157,32 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder,
> &pipe_config->infoframes.hdmi);
> }
>
> +static void g4x_hdmi_enable_port(struct intel_encoder *encoder,
> + const struct intel_crtc_state *pipe_config)
> +{
> + struct drm_device *dev = encoder->base.dev;
> + struct drm_i915_private *dev_priv = to_i915(dev);
Could clean up some of the drm_device and dev_priv on top.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> + u32 temp;
> +
> + temp = intel_de_read(dev_priv, intel_hdmi->hdmi_reg);
> +
> + temp |= SDVO_ENABLE;
> + if (pipe_config->has_audio)
> + temp |= HDMI_AUDIO_ENABLE;
> +
> + intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
> + intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
> +}
> +
> static void g4x_enable_hdmi(struct intel_atomic_state *state,
> struct intel_encoder *encoder,
> const struct intel_crtc_state *pipe_config,
> const struct drm_connector_state *conn_state)
> {
> - struct drm_device *dev = encoder->base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> - u32 temp;
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>
> - temp = intel_de_read(dev_priv, intel_hdmi->hdmi_reg);
> -
> - temp |= SDVO_ENABLE;
> - if (pipe_config->has_audio)
> - temp |= HDMI_AUDIO_ENABLE;
> -
> - intel_de_write(dev_priv, intel_hdmi->hdmi_reg, temp);
> - intel_de_posting_read(dev_priv, intel_hdmi->hdmi_reg);
> + g4x_hdmi_enable_port(encoder, pipe_config);
>
> drm_WARN_ON(&dev_priv->drm, pipe_config->has_audio &&
> !pipe_config->has_hdmi_sink);
> @@ -294,6 +302,11 @@ static void vlv_enable_hdmi(struct intel_atomic_state *state,
> const struct intel_crtc_state *pipe_config,
> const struct drm_connector_state *conn_state)
> {
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +
> + drm_WARN_ON(&dev_priv->drm, pipe_config->has_audio &&
> + !pipe_config->has_hdmi_sink);
> + intel_audio_codec_enable(encoder, pipe_config, conn_state);
> }
>
> static void intel_disable_hdmi(struct intel_atomic_state *state,
> @@ -415,7 +428,7 @@ static void vlv_hdmi_pre_enable(struct intel_atomic_state *state,
> pipe_config->has_infoframe,
> pipe_config, conn_state);
>
> - g4x_enable_hdmi(state, encoder, pipe_config, conn_state);
> + g4x_hdmi_enable_port(encoder, pipe_config);
>
> vlv_wait_port_ready(dev_priv, dig_port, 0x0);
> }
> @@ -492,7 +505,7 @@ static void chv_hdmi_pre_enable(struct intel_atomic_state *state,
> pipe_config->has_infoframe,
> pipe_config, conn_state);
>
> - g4x_enable_hdmi(state, encoder, pipe_config, conn_state);
> + g4x_hdmi_enable_port(encoder, pipe_config);
>
> vlv_wait_port_ready(dev_priv, dig_port, 0x0);
--
Jani Nikula, Intel Open Source Graphics Center
prev parent reply other threads:[~2022-12-08 13:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-07 22:52 [Intel-gfx] [PATCH] drm/i915: Fix VLV/CHV HDMI/DP audio enable Ville Syrjala
2022-12-07 23:34 ` [Intel-gfx] ✓ Fi.CI.BAT: success for " Patchwork
2022-12-08 7:23 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2022-12-08 13:45 ` Jani Nikula [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wn72ypoa.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox