Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Emil Velikov <emil.l.velikov@gmail.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	kernel@collabora.com
Subject: Re: [Intel-gfx] [PATCH] drm/i915: apply WaEnableVGAAccessThroughIOPort as needed
Date: Thu, 10 Jun 2021 18:01:29 +0300	[thread overview]
Message-ID: <YMIpSYuTrz1r5IxG@intel.com> (raw)
In-Reply-To: <20210604154905.660142-1-emil.l.velikov@gmail.com>

On Fri, Jun 04, 2021 at 04:49:05PM +0100, Emil Velikov wrote:
> From: Emil Velikov <emil.velikov@collabora.com>
> 
> Currently as the workaround is applied the screen flickers. As a result
> we do not achieve seamless boot experience.
> 
> Avoiding the issue in the common use-case might be hard, although we can
> resolve it for dual GPU setups - when the "other" GPU is primary and/or
> outputs are connected to it.
> 
> With this I was able to get seamless experience on my Intel/Nvidia box,
> running systemd-boot and sddm/Xorg. Note that the i915 driver is within
> initrd while the Nvidia one is not.
> 
> Without this patch, the splash presented by systemd-boot (UEFI BGRT) is
> torn down as the code-path kicks in, leaving the monitor blank until the
> login manager starts.
> 
> Same issue were reported with plymouth/grub, although personally I
> wasn't able to get them to behave on my setup.
> 
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
> ---

Pushed to drm-intel-next. Thanks.

> 
> Supersedes
> https://lore.kernel.org/dri-devel/20210516171432.1734268-1-emil.l.velikov@gmail.com/
> 
> Ville, others,
> 
> Patch is based against drm-intel/drm-intel-next and will apply cleanly
> against drm-intel/drm-intel-fixes.
> 
> If possible, can one of the i915 maintainers apply it to the latter?
> 
> Thanks
> Emil
> ---
>  drivers/gpu/drm/i915/display/intel_vga.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_vga.c b/drivers/gpu/drm/i915/display/intel_vga.c
> index be333699c515..7beef1206097 100644
> --- a/drivers/gpu/drm/i915/display/intel_vga.c
> +++ b/drivers/gpu/drm/i915/display/intel_vga.c
> @@ -29,6 +29,9 @@ void intel_vga_disable(struct drm_i915_private *dev_priv)
>  	i915_reg_t vga_reg = intel_vga_cntrl_reg(dev_priv);
>  	u8 sr1;
>  
> +	if (intel_de_read(dev_priv, vga_reg) & VGA_DISP_DISABLE)
> +		return;
> +
>  	/* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
>  	vga_get_uninterruptible(pdev, VGA_RSRC_LEGACY_IO);
>  	outb(SR01, VGA_SR_INDEX);
> -- 
> 2.31.1

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

      parent reply	other threads:[~2021-06-10 15:01 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-04 15:49 [Intel-gfx] [PATCH] drm/i915: apply WaEnableVGAAccessThroughIOPort as needed Emil Velikov
2021-06-04 16:57 ` [Intel-gfx] ✓ Fi.CI.BAT: success for " Patchwork
2021-06-04 18:12 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-06-09  9:18 ` [Intel-gfx] [PATCH] " Emil Velikov
2021-06-10 15:01 ` Ville Syrjälä [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMIpSYuTrz1r5IxG@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emil.l.velikov@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=kernel@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox