From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH V6] drm/i915/gen11: Disable cursor clock gating in HDR mode
Date: Tue, 28 Sep 2021 17:15:32 +0300 [thread overview]
Message-ID: <YVMjhOQ2TyCXI76b@intel.com> (raw)
In-Reply-To: <20210927100240.2527555-1-tejaskumarx.surendrakumar.upadhyay@intel.com>
On Mon, Sep 27, 2021 at 03:32:40PM +0530, Tejas Upadhyay wrote:
> Display underrun in HDR mode when cursor is enabled.
> RTL fix will be implemented CLKGATE_DIS_PSL_A bit 28-46520h.
> As per W/A 1604331009, Disable cursor clock gating in HDR mode.
>
> Bspec : 33451
>
> Changes since V5:
> - replace intel_de_read with intel_de_rmw - Jani
> Changes since V4:
> - Added WA needed check - Ville
> - Replace BIT with REG_BIT - Ville
> - Add WA enable/disable support back which was added in V1 - Ville
> Changes since V3:
> - Disable WA when not in HDR mode or cursor plane not active - Ville
> - Extract required args from crtc_state - Ville
> - Create HDR mode API using bdw_set_pipemisc ref - Ville
> - Tested with HDR video as well full setmode, WA applies and disables
> Changes since V2:
> - Made it general gen11 WA
> - Removed WA needed check
> - Added cursor plane active check
> - Once WA enable, software will not disable
> Changes since V1:
> - Modified way CLKGATE_DIS_PSL bit 28 was modified
>
> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 31 ++++++++++++++++++++
> drivers/gpu/drm/i915/i915_reg.h | 1 +
> 2 files changed, 32 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index f27c294beb92..e6ccc986bf27 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -214,6 +214,14 @@ icl_wa_scalerclkgating(struct drm_i915_private *dev_priv, enum pipe pipe,
> intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) & ~DPFR_GATING_DIS);
> }
>
> +/* Wa_1604331009:icl,jsl,ehl */
> +static void
> +icl_wa_cursorclkgating(struct drm_i915_private *dev_priv, enum pipe pipe,
> + bool enable)
> +{
> + intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(pipe), CURSOR_GATING_DIS, enable ? CURSOR_GATING_DIS : 0);
Checkapatch complained about the long line. Trivial to fix here.
> +}
> +
> static bool
> is_trans_port_sync_slave(const struct intel_crtc_state *crtc_state)
> {
> @@ -2356,6 +2364,19 @@ static bool needs_scalerclk_wa(const struct intel_crtc_state *crtc_state)
> return false;
> }
>
> +static bool needs_cursorclk_wa(const struct intel_crtc_state *crtc_state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
> +
> + /* Wa_1604331009:icl,jsl,ehl */
> + if (is_hdr_mode(crtc_state) &&
> + crtc_state->active_planes & BIT(PLANE_CURSOR) &&
> + DISPLAY_VER(dev_priv) == 11)
> + return true;
> +
> + return false;
> +}
> +
> static bool planes_enabling(const struct intel_crtc_state *old_crtc_state,
> const struct intel_crtc_state *new_crtc_state)
> {
> @@ -2398,6 +2419,11 @@ static void intel_post_plane_update(struct intel_atomic_state *state,
> if (needs_scalerclk_wa(old_crtc_state) &&
> !needs_scalerclk_wa(new_crtc_state))
> icl_wa_scalerclkgating(dev_priv, pipe, false);
> +
> + if (needs_cursorclk_wa(old_crtc_state) &&
> + !needs_cursorclk_wa(new_crtc_state))
> + icl_wa_cursorclkgating(dev_priv, pipe, false);
> +
Stray newline.
> }
>
> static void intel_crtc_enable_flip_done(struct intel_atomic_state *state,
> @@ -2494,6 +2520,11 @@ static void intel_pre_plane_update(struct intel_atomic_state *state,
> needs_scalerclk_wa(new_crtc_state))
> icl_wa_scalerclkgating(dev_priv, pipe, true);
>
> + /* Wa_1604331009:icl,jsl,ehl */
> + if (!needs_cursorclk_wa(old_crtc_state) &&
> + needs_cursorclk_wa(new_crtc_state))
> + icl_wa_cursorclkgating(dev_priv, pipe, true);
> +
> /*
> * Vblank time updates from the shadow to live plane control register
> * are blocked if the memory self-refresh mode is active at that
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index ef594df039db..7b3eed5b4e42 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4272,6 +4272,7 @@ enum {
> #define DPF_GATING_DIS (1 << 10)
> #define DPF_RAM_GATING_DIS (1 << 9)
> #define DPFR_GATING_DIS (1 << 8)
> +#define CURSOR_GATING_DIS REG_BIT(28)
Please keep the bits in order.
Otherwise lgtm
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> #define CLKGATE_DIS_PSL(pipe) \
> _MMIO_PIPE(pipe, _CLKGATE_DIS_PSL_A, _CLKGATE_DIS_PSL_B)
> --
> 2.31.1
--
Ville Syrjälä
Intel
prev parent reply other threads:[~2021-09-28 14:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-27 10:02 [Intel-gfx] [PATCH V6] drm/i915/gen11: Disable cursor clock gating in HDR mode Tejas Upadhyay
2021-09-27 15:22 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/gen11: Disable cursor clock gating in HDR mode (rev5) Patchwork
2021-09-27 15:51 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-09-27 18:16 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-09-28 14:15 ` Ville Syrjälä [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YVMjhOQ2TyCXI76b@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tejaskumarx.surendrakumar.upadhyay@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox