From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Vinod Govindapillai <vinod.govindapillai@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
dri-devel@lists.freedesktop.org, ville.syrjala@intel.com,
santhosh.reddy.guddati@intel.com, jani.saarinen@intel.com
Subject: Re: [PATCH v7 2/7] drm/i915/xe3: update and store the plane damage clips
Date: Wed, 12 Feb 2025 20:35:06 +0200 [thread overview]
Message-ID: <Z6zp2lzMGEevu5kr@intel.com> (raw)
In-Reply-To: <20250212131420.60026-3-vinod.govindapillai@intel.com>
On Wed, Feb 12, 2025 at 03:14:15PM +0200, Vinod Govindapillai wrote:
> Userspace can pass damage area clips per plane to track
> changes in a plane and some display components can utilze
> these damage clips for efficiently handling use cases like
> FBC, PSR etc. A merged damage area is generated and its
> coordinates are updated relative to viewport and HW and
> stored in the plane_state. This merged damage areas will be
> used for FBC dirty rect support in xe3 in the follow-up
> patch.
>
> Big thanks to Ville Syrjala for his contribuitions in shaping
> up of this series.
>
> v1: - Move damage_merged helper to cover bigjoiner case and use
> the correct plane state for damage find helper (Ville)
> - Damage handling code under HAS_FBC_DIRTY_RECT() so the
> the related part will be executed only for xe3+
> - Changed dev_priv to i915 in one of the functions
>
> v2: - damage reported is stored in the plane state after coords
> adjustmentments irrespective of fbc dirty rect support.
> - Damage to be empty in case of plane not visible (Ville)
> - Handle fb could be NULL and plane not visible cases (Ville)
>
> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
> ---
> .../gpu/drm/i915/display/intel_atomic_plane.c | 31 +++++++++++++
> .../drm/i915/display/intel_display_types.h | 2 +
> .../drm/i915/display/skl_universal_plane.c | 46 ++++++++++++++++++-
> 3 files changed, 78 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> index 8a49d87d9bd9..b4e94dd01173 100644
> --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> @@ -36,6 +36,7 @@
>
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_blend.h>
> +#include <drm/drm_damage_helper.h>
> #include <drm/drm_fourcc.h>
> #include <drm/drm_gem.h>
> #include <drm/drm_gem_atomic_helper.h>
> @@ -117,6 +118,7 @@ intel_plane_duplicate_state(struct drm_plane *plane)
> intel_state->ggtt_vma = NULL;
> intel_state->dpt_vma = NULL;
> intel_state->flags = 0;
> + intel_state->damage = DRM_RECT_INIT(0, 0, 0, 0);
>
> /* add reference to fb */
> if (intel_state->hw.fb)
> @@ -322,6 +324,27 @@ static void intel_plane_clear_hw_state(struct intel_plane_state *plane_state)
> memset(&plane_state->hw, 0, sizeof(plane_state->hw));
> }
>
> +static void
> +intel_plane_copy_uapi_plane_damage(struct intel_plane_state *new_plane_state,
> + const struct intel_plane_state *old_uapi_plane_state,
> + const struct intel_plane_state *new_uapi_plane_state)
> +{
> + struct intel_display *display = to_intel_display(new_plane_state);
> + struct drm_rect *damage = &new_plane_state->damage;
> +
> + /* damage property tracking enabled from display version 12 onwards */
> + if (DISPLAY_VER(display) < 12) {
> + *damage = DRM_RECT_INIT(0, 0, 0, 0);
> + return;
> + }
I don't think that is needed. If we have no damage prop then the helper
will give us full damage.
> +
> + if (!drm_atomic_helper_damage_merged(&old_uapi_plane_state->uapi,
> + &new_uapi_plane_state->uapi,
> + damage))
> + /* Incase helper fails, mark whole plane region as damage */
> + *damage = drm_plane_state_src(&new_uapi_plane_state->uapi);
> +}
> +
> void intel_plane_copy_uapi_to_hw_state(struct intel_plane_state *plane_state,
> const struct intel_plane_state *from_plane_state,
> struct intel_crtc *crtc)
> @@ -691,6 +714,7 @@ int intel_plane_atomic_check(struct intel_atomic_state *state,
> const struct intel_plane_state *old_plane_state =
> intel_atomic_get_old_plane_state(state, plane);
> const struct intel_plane_state *new_primary_crtc_plane_state;
> + const struct intel_plane_state *old_primary_crtc_plane_state;
> struct intel_crtc *crtc = intel_crtc_for_pipe(display, plane->pipe);
> const struct intel_crtc_state *old_crtc_state =
> intel_atomic_get_old_crtc_state(state, crtc);
> @@ -705,10 +729,17 @@ int intel_plane_atomic_check(struct intel_atomic_state *state,
>
> new_primary_crtc_plane_state =
> intel_atomic_get_new_plane_state(state, primary_crtc_plane);
> + old_primary_crtc_plane_state =
> + intel_atomic_get_old_plane_state(state, primary_crtc_plane);
> } else {
> new_primary_crtc_plane_state = new_plane_state;
> + old_primary_crtc_plane_state = old_plane_state;
> }
>
> + intel_plane_copy_uapi_plane_damage(new_plane_state,
> + old_primary_crtc_plane_state,
> + new_primary_crtc_plane_state);
> +
> intel_plane_copy_uapi_to_hw_state(new_plane_state,
> new_primary_crtc_plane_state,
> crtc);
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 6a82c6ade549..844f92ea4f45 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -697,6 +697,8 @@ struct intel_plane_state {
> u64 ccval;
>
> const char *no_fbc_reason;
> +
> + struct drm_rect damage;
> };
>
> struct intel_initial_plane_config {
> diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> index eb85d3d6cdc3..3e3c22a26357 100644
> --- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
> +++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> @@ -2260,6 +2260,44 @@ static void check_protection(struct intel_plane_state *plane_state)
> !plane_state->decrypt;
> }
>
> +static void
> +make_damage_viewport_relative(struct intel_plane_state *plane_state)
> +{
> + const struct drm_framebuffer *fb = plane_state->hw.fb;
> + const struct drm_rect *src = &plane_state->uapi.src;
> + unsigned int rotation = plane_state->hw.rotation;
> + struct drm_rect *damage = &plane_state->damage;
> +
> + if (!drm_rect_visible(damage))
> + return;
> +
> + if (!fb || !plane_state->uapi.visible) {
> + plane_state->damage = DRM_RECT_INIT(0, 0, 0, 0);
> + return;
> + }
> +
> + if (drm_rotation_90_or_270(rotation)) {
> + drm_rect_rotate(damage, fb->width, fb->height,
> + DRM_MODE_ROTATE_270);
> + drm_rect_translate(damage, -(src->y1 >> 16), -(src->x1 >> 16));
> + } else {
> + drm_rect_translate(damage, -(src->x1 >> 16), -(src->y1 >> 16));
> + }
> +}
> +
> +static void clip_damage(struct intel_plane_state *plane_state)
> +{
> + struct drm_rect *damage = &plane_state->damage;
> + struct drm_rect src;
> +
> + if (!drm_rect_visible(damage))
> + return;
> +
> + drm_rect_fp_to_int(&src, &plane_state->uapi.src);
> + drm_rect_translate(damage, src.x1, src.y1);
> + drm_rect_intersect(damage, &src);
> +}
> +
> static int skl_plane_check(struct intel_crtc_state *crtc_state,
> struct intel_plane_state *plane_state)
> {
> @@ -2285,6 +2323,8 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
> if (ret)
> return ret;
>
> + make_damage_viewport_relative(plane_state);
> +
> ret = skl_check_plane_surface(plane_state);
> if (ret)
> return ret;
> @@ -2300,6 +2340,8 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
> if (ret)
> return ret;
>
> + clip_damage(plane_state);
> +
> ret = skl_plane_check_nv12_rotation(plane_state);
> if (ret)
> return ret;
> @@ -2307,8 +2349,10 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
> check_protection(plane_state);
>
> /* HW only has 8 bits pixel precision, disable plane if invisible */
> - if (!(plane_state->hw.alpha >> 8))
> + if (!(plane_state->hw.alpha >> 8)) {
> plane_state->uapi.visible = false;
> + plane_state->damage = DRM_RECT_INIT(0, 0, 0, 0);
> + }
>
> plane_state->ctl = skl_plane_ctl(crtc_state, plane_state);
>
> --
> 2.43.0
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2025-02-12 18:35 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-12 13:14 [PATCH v7 0/7] drm/i915/fbc: FBC Dirty rect feature support Vinod Govindapillai
2025-02-12 13:14 ` [PATCH v7 1/7] drm/damage-helper: add const qualifier in drm_atomic_helper_damage_merged() Vinod Govindapillai
2025-02-12 13:14 ` [PATCH v7 2/7] drm/i915/xe3: update and store the plane damage clips Vinod Govindapillai
2025-02-12 18:35 ` Ville Syrjälä [this message]
2025-02-12 20:14 ` Govindapillai, Vinod
2025-02-12 20:42 ` Ville Syrjälä
2025-02-12 13:14 ` [PATCH v7 3/7] drm/i915/xe3: add register definitions for fbc dirty rect support Vinod Govindapillai
2025-02-12 13:14 ` [PATCH v7 4/7] drm/i915/xe3: introduce HAS_FBC_DIRTY_RECT() for FBC " Vinod Govindapillai
2025-02-12 13:14 ` [PATCH v7 5/7] drm/i915/xe3: avoid calling fbc activate if fbc is active Vinod Govindapillai
2025-02-12 18:30 ` Ville Syrjälä
2025-02-12 20:21 ` Govindapillai, Vinod
2025-02-12 13:14 ` [PATCH v7 6/7] drm/i915/xe3: dirty rect support for FBC Vinod Govindapillai
2025-02-12 18:42 ` Ville Syrjälä
2025-02-12 13:14 ` [PATCH v7 7/7] drm/i915/xe3: disable FBC if PSR2 selective fetch is enabled Vinod Govindapillai
2025-02-12 14:48 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/fbc: FBC Dirty rect feature support Patchwork
2025-02-12 14:48 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-02-12 15:09 ` ✓ i915.CI.BAT: success " Patchwork
2025-02-12 22:37 ` ✗ i915.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z6zp2lzMGEevu5kr@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.saarinen@intel.com \
--cc=santhosh.reddy.guddati@intel.com \
--cc=ville.syrjala@intel.com \
--cc=vinod.govindapillai@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox