From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Matt Atwood <matthew.s.atwood@intel.com>
Cc: intel-gfx@freedesktop.org, suraj.kandpal@intel.com
Subject: Re: [PATCH] drm/i915/xe3lpd: Prune modes for YUV420
Date: Wed, 5 Mar 2025 15:32:36 +0200 [thread overview]
Message-ID: <Z8hSdBQvBMMosSIR@intel.com> (raw)
In-Reply-To: <20250304200032.68292-1-matthew.s.atwood@intel.com>
On Tue, Mar 04, 2025 at 12:00:31PM -0800, Matt Atwood wrote:
> From: Suraj Kandpal <suraj.kandpal@intel.com>
>
> We only support resolution upto 4k for single pipe when using
> YUV420 format so we prune these modes and restrict the plane size
> at src.
>
> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 205ec315b413..8bccc6e0b5b3 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1396,6 +1396,7 @@ intel_dp_mode_valid(struct drm_connector *_connector,
> struct intel_display *display = to_intel_display(_connector->dev);
> struct intel_connector *connector = to_intel_connector(_connector);
> struct intel_dp *intel_dp = intel_attached_dp(connector);
> + enum intel_output_format sink_format;
> const struct drm_display_mode *fixed_mode;
> int target_clock = mode->clock;
> int max_rate, mode_rate, max_lanes, max_link_clock;
> @@ -1429,6 +1430,13 @@ intel_dp_mode_valid(struct drm_connector *_connector,
> mode->hdisplay, target_clock);
> max_dotclk *= num_joined_pipes;
>
> + sink_format = intel_dp_sink_format(connector, mode);
> + if (num_joined_pipes == 1) {
> + if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
sink_format is irrelevant. output_format is what matters.
> + mode->hdisplay > 4096)
> + return MODE_NO_420;
> + }
Which hardware limit are you actully trying to handle here?
> +
> if (target_clock > max_dotclk)
> return MODE_CLOCK_HIGH;
>
> @@ -1444,10 +1452,9 @@ intel_dp_mode_valid(struct drm_connector *_connector,
> intel_dp_mode_min_output_bpp(connector, mode));
>
> if (intel_dp_has_dsc(connector)) {
> - enum intel_output_format sink_format, output_format;
> + enum intel_output_format output_format;
> int pipe_bpp;
>
> - sink_format = intel_dp_sink_format(connector, mode);
> output_format = intel_dp_output_format(connector, sink_format);
> /*
> * TBD pass the connector BPC,
> --
> 2.45.0
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2025-03-05 13:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-04 20:00 [PATCH] drm/i915/xe3lpd: Prune modes for YUV420 Matt Atwood
2025-03-04 22:08 ` ✗ Fi.CI.CHECKPATCH: warning for " Patchwork
2025-03-04 22:26 ` ✗ i915.CI.BAT: failure " Patchwork
2025-03-05 13:32 ` Ville Syrjälä [this message]
-- strict thread matches above, loose matches on Subject: below --
2025-06-09 16:45 [PATCH] " Suraj Kandpal
2025-06-09 17:20 ` Cavitt, Jonathan
2025-06-09 17:59 ` Ville Syrjälä
2025-06-11 1:10 ` Kandpal, Suraj
2025-06-17 4:43 Suraj Kandpal
2025-06-17 9:00 ` Jani Nikula
2025-06-17 9:32 ` Kandpal, Suraj
2025-06-20 6:46 ` Kandpal, Suraj
2025-06-20 9:25 Suraj Kandpal
2025-07-07 4:30 ` Nautiyal, Ankit K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z8hSdBQvBMMosSIR@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@freedesktop.org \
--cc=matthew.s.atwood@intel.com \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox